3D Printed 1/5 Scale 77 Ford F350

[JDH429]

Started out as a smaller scale idea, but ended up being more of a test to see the limits to what size I could build something. This is the largest object I have 3d printed, and could obviously be larger depending on the time I had to put into the project.


I first came across the tires which are the largest scale rc tire available at 10" dia and these took me in this direction, so I started to design the rims to fit and went from there.

http://lh5.googleusercontent.com/-B5p6AmXBqqw/VGWN3I_XRVI/AAAAAAAACDk/AAhn8Wbw-TA/s1024-no/IMG_0093.JPG


http://lh3.googleusercontent.com/-vYyzTZ_76qs/VGWNjsYHdpI/AAAAAAAACCk/UpbjRfgDk4k/s1024-no/IMG_0094.JPG

Body and chassis designed and sliced for printing, over 120 seperate parts which took a few hundred hrs to print, and a while longer to assemble. It's still a work in progress..

http://lh4.googleusercontent.com/-ATqn1Sukync/VGe5gpLa16I/AAAAAAAACVM/CjkgK1Qilkw/s1024-no/IMG_0177.PNG

http://lh3.googleusercontent.com/-C3yeRXchEWs/VGWOpeH0G8I/AAAAAAAACDw/xkMe7s8KRxU/s1024-no/IMG_0096.JPG

http://lh6.googleusercontent.com/-vqjQx6IZlnk/VQY1g0Bw1II/AAAAAAAACVc/treLnGBVa-M/s1024-no/IMG_0249.PNG

http://lh6.googleusercontent.com/-syUxc2BBXd0/VQY1iPDH-DI/AAAAAAAACVk/1qT1ggPpB5Y/s1024-no/IMG_0250.PNG

http://lh6.googleusercontent.com/-TyOsiquduKY/VGWNluJ-f8I/AAAAAAAACCs/2Rt6QxUletA/s1024-no/IMG_0092.JPG

http://lh5.googleusercontent.com/-3ahU1w67VXY/VGrDbPW-kmI/AAAAAAAACGA/CyEzUKckTBM/s1024-no/IMG_0108.JPG

http://lh5.googleusercontent.com/-FhzsNS8KNkU/VGrDdi9ga6I/AAAAAAAACGI/GpTOQJfT4X0/s1024-no/IMG_0109.JPG

http://lh4.googleusercontent.com/-2I3gimX0JtI/VGWNwLZybbI/AAAAAAAACDM/mMb7iep4gJ4/s1024-no/IMG_0088.JPG

http://lh6.googleusercontent.com/-1LA34-uoyS0/VGrDYfxuGsI/AAAAAAAACF4/lNa2XgdmJ0U/s1024-no/IMG_0107.JPG

http://lh5.googleusercontent.com/-rDgVJNs68ng/VGWN1ELPmII/AAAAAAAACEs/hz4Z90LJkvU/s1024-no/IMG_0087.JPG

http://lh6.googleusercontent.com/-siKMDVpksec/VGvCgzEbWkI/AAAAAAAACHw/r_PQpYmS5No/s1024-no/IMG_0199.JPG

http://lh5.googleusercontent.com/-DqSHQTbIy4Y/VGvCcqdjDJI/AAAAAAAACHo/apHVhnD0a5c/s1024-no/IMG_0201.JPG

http://lh4.googleusercontent.com/-im83FME_fWc/VGvCZmMmPyI/AAAAAAAACHg/X6pjW-CV2QU/s1024-no/IMG_0200.JPG

http://lh6.googleusercontent.com/-tGSEd0jBSJI/VG_QLTH1EII/AAAAAAAACIY/_CvSU6UBqME/s1024-no/IMG_0209.JPG

[JDH429]

Mocking up the suspension. The axles are MOA type from rc4wd and the shocks are HPI Baja shocks. if you need a size reference, that's a 1 gal can propping up the rear end..

http://lh5.googleusercontent.com/-qHbsmjYhTl0/VI-Ligb3eJI/AAAAAAAACLg/CN2MNzn-TB4/s1024-no/2014-12-15%2020.09.35.jpg

http://lh5.googleusercontent.com/-tuD469Tkz9s/VI-M9NpxsNI/AAAAAAAACLs/VbDd10fTkfw/s1024-no/2014-12-15%2020.00.38.jpg

http://lh6.googleusercontent.com/-071vRnIXd5c/VI-pFct5jaI/AAAAAAAACM0/ZYU9xxvcK-Q/s1024-no/IMG_0217.JPG

http://lh5.googleusercontent.com/-627leL-XB10/VI-NIhqP9HI/AAAAAAAACME/nVMrUi56DF0/s1024-no/2014-12-15%2020.01.50.jpg

http://lh6.googleusercontent.com/-ukCPTXTKZ_E/VI-NF7JrbGI/AAAAAAAACL8/LGVTpF7KEsM/s1024-no/2014-12-15%2020.05.35.jpg

http://lh3.googleusercontent.com/-CtzAco9DKCM/VQY1fzfpWkI/AAAAAAAACVU/AvjDYuU38zM/s1024-no/IMG_0248.JPG

[JDH429]

I had 2 printers running day and night it seemed for a few weeks, each printing multiple parts together at once.
The hood is removable to reveal a scale engine which is in the works, but as of right now this project is on a shelf, as I've burned myself out a bit and needed a change and have switched over to trying to finish up my Vario.

http://lh3.googleusercontent.com/-anb1WYdfhPw/VQY-VAI4XBI/AAAAAAAACV0/W6QEpEhlKLQ/s1024-no/IMG_0251.JPG

[RCP57]

That is awesome Jason! I wondered what had happened to you but I guess now I know!lol I was tempted to email you a couple of times just to see if you were alive. Great to see that you are building something so unique. I also really like the size of it!

Reg

[JDH429]

Thanks Reg! Ya I was away for a bit. And this project is a bit off track for me and yes it soaked up a few months of free time. Looking forward to catching back up with what everyone else has been up to as well.

[fhhhstix]

Like Reg said "That is awesome Jason!" fantastic job!!

Travis

[TRUCKMAKER]

This an amazing build, its looking great and glad to see your back at it!

[JAMMER]

Great job Jason looks real good, there is some Cad time in that. Ed

[tc1cat]

Truck looks OUTSTANDING!! The 3d printing is some of the best I have seen. Looks like it will not take too much filling and sanding to get a great looking body.

[JDH429]

Thanks for the compliments. Happy to share the pics. Wish I had a more complete model to show.

[bigford]

that last pic is so real looking if not for the monster can in the way

[1985 kenworth]

wow ...wow..very nice work indeed:D:D:jaw:

[Exclusive RC]

Very nice work bud, any plans for an interior?

[JDH429]

Thanks again for the compliments everyone.

Very nice work bud, any plans for an interior?

Thanks, no I hadn't given it much thought. This is one of those projects I may come back to in a few years when I rediscover interest in it.


I hit a bit of a speed bump when assembling the 4 link suspension, the aluminum rod ends which I got from rc4wd ( the largest I could find) were very poorly made and sloppy enough where the whole truck shimmies back forth due the pressed ball inside the alum eye being too loose. Emailed rc4wd multiple times about it with no response, this took the wind out of my sails and I never progressed any further. Being that it sat idle for so long waiting for some help from them I moved into the next project. So here it sits, just an example of what can be created if you have the time.

[JDH429]

Sloppy rc4wd rod ends

https://youtu.be/S337mYZqh1w

[Kaf343]

Jason, very impressive build. I would love to see this one in action someday. Would a pan hard bar help with the side to side issue due to the loose ball joints? Keep up the great work. Hopefully you won't be off this one to long, would love to see it running.

[JDH429]

Hey Keith, I was thinking the same thing you are. That would solve the issue, I was just a bit pissed that these rod ends sucked so much and that rc4wd just ignored the emails I sent. If I get back at this one I will seriously think about something to take up the lateral movement like you suggested, good to hear from you.

[Trucker_Jo]

I have been drooling on this build on the other forums and am glad to see that you're still on here as well. Looking forward to see what you print up next.

[Radkeela2]

What 3d printer do you use and what modeling software,that looks amazing

[rc_farmer]

Wow, Jason, that looks awesome!:eek: keep up the good work

[JDH429]

Thanks guys.

Do a search, I wrote a 3D Print thread with that info there.

[DieselKid]

This is sweet!!! And huge too! LOL!:D

-Alex

[Radkeela2]

do you plan on sharing these files or selling them,i would like to give it a shot?

[Radkeela2]

Man I hope you finish this thing,I've been waiting for a update for 2months lol

[RCKiwi]

Lookin' good Jason! Even tho you've got a drink can here and there and gives some sort of scale, I find the best indication is to stand beside it - do you have anyone that could take a pic of it with you beside it or a willing model? It looks MASSIVE!
Loving how you've broken it down to printable bits and are piecing it together - I bet it's really satisfying to get a bunch of bits, newly printed and carefully assemble them