Magom HRC metal 1/14 track loader

[Northern Farmer]

Just saw this today on facebook, Magom just released a 1/14 hydraulic metal track loader TL14
https://www.facebook.com/permalink.php?story_fbid=862075350535080&id=447993998609886
http://i62.tinypic.com/2ajb0bk.jpg

http://i61.tinypic.com/34dhruq.jpg

http://i60.tinypic.com/140vtk1.jpg

http://i62.tinypic.com/29yjdye.jpg

[Kausekaos]

Interesting. Price listed?

[Northern Farmer]

We are pleased to announce our new Magom HRC TL14. It is a 1/14 scale track loader with double bucket cylinders.
- New HD bucket type.
- New realistic pin holder.
- Easy battery access.
- Easy hydraulic access with only 4 screws.

Price of the KIT is 980 € (including track drive motors).
Price of the complete model (painted RTR) is 1599 €.

[Northern Farmer]

Action footage
https://m.youtube.com/watch?v=KJUp17fXWps

[Valdosetti]

WOW! That's what I call good deal!!!
Even if doesn't look as cool as Scaleart, seems to work very well with 1/5 of their price if so. I got have one of these. rsrsrs!

[Kausekaos]

I cant wait to see one all painted up. Have a tag trailer missing a track loader.

[Digger_Bear]

This looks nice and on my want list.

[Kausekaos]

There's a video of it with sound now. https://youtu.be/T4Wt9E3kEEs

[JAMMER]

That sounds is real good and almost like the real thing.

[Northern Farmer]

Some small changes made to the production version. Driver cabin looks more to scale :cool:
http://i65.tinypic.com/15hd8ox.jpg

http://i67.tinypic.com/5b4var.jpg

http://i68.tinypic.com/259j4ba.jpg

http://i65.tinypic.com/2n6xgns.jpg

http://i66.tinypic.com/alhfs9.jpg

[Northern Farmer]

http://www.magomhrc.com/en/mg-tl14-track-loader-114/533-tl14-114-full-metal-track-loader.html

[Northern Farmer]

Kit fitted with hydraulics
http://i65.tinypic.com/fmtci1.jpg
http://www.magomhrc.com/en/mg-tl14-track-loader-114/534-tl14-114-full-metal-track-loader-kit-hydraulics.html

[Kausekaos]

I'm really interested in this thing. Haven't ordered my track loader because i decided to wait till i had it order everything one shot. Do you thing this is worth getting?

[Northern Farmer]

It does look pretty cool, cost isn't up there.

[RCP57]

No one will ever know until someone steps up and buys one. Get on it Calvin! You have dump trucks and no loader....:p

[Kausekaos]

I emailed them to ask specs. Need to know how high the bucket lifts if it doesn't load the Dump truck its a waste for me lol.

[Kausekaos]

They responded fairly quick, until next week than.

Customer message: I'm really interested in your TL14. Can i get the specs of the machine?
Height, Length, Width.
How high dose the bucket lift?

Response

Thanks for contact us and be interested in our products.
All the dimensions for the TL14 will be available next week.
Also we will make power testings.

Any doubts, questions, please do not hesitate to contact us again,

[TRUCKMAKER]

I emailed them to ask specs. Need to know how high the bucket lifts if it doesn't load the Dump truck its a waste for me lol.

That's when the loader operator makes a loading platform!:D

[RCP57]

That's when the loader operator makes a loading platform!:D

Yeah I have to do this with my Bruder 574 every time I use it! Not a big deal really...

[Kausekaos]

True that is a option.

[RCP57]

Just let the moths out of your wallet and order one up.

[Kausekaos]

I really thing I'm going too honestly.

[Supermario]

Just saw some new pics of this loader. Is it just me? Looking from this angle this thing has a very very low ground clearance:eek: is 15mm enough?

http://i1275.photobucket.com/albums/y447/catman4088/0f5090cbd98622e0289169cc2d3f7f70_zpsjsivx8n4.jpg

[RCP57]

Just saw some new pics of this loader. Is it just me? Looking from this angle this thing has a very very low ground clearance:eek: is 15mm enough?

http://i1275.photobucket.com/albums/y447/catman4088/0f5090cbd98622e0289169cc2d3f7f70_zpsjsivx8n4.jpg

Great for ground rubber on a cement floor maybe. I understand why they probably did this but that's not much ground clearance. It will be constantly dragging it's belly that's for sure.

[Kausekaos]

Never realized that low ground clearance. It looks good painted though. There's more pictures on their Facebook page.

[trucker n]

Just purchased one will see what it's like when I get it

[Mikem]

But doesn't the bucket move and level the dirt so the ground clearance wouldn't matter ? Just a question . I looked at there site Sunday and its out of stock I'll go look again

[trucker n]

Yeah I saw out of stock I emailed them and got reply this morning that all was back in stock I also noticed they sell the Jung pump witch I wanted but they said it won't fit in this machine I also got the sound for it

[Rakthi]

There are some pics of it being assembled on the Modell-Baustelle.de forum

Here is the link:
http://www.modell-baustelle.de/index.php?page=Thread&threadID=8638

[Rimrock]

Yeah I saw out of stock I emailed them and got reply this morning that all was back in stock I also noticed they sell the Jung pump witch I wanted but they said it won't fit in this machine I also got the sound for it

Magom got the Jung pump, but keep in mind that the motor/tank/ is Magom's own set-up (cheap) and will not perform as good as the same Jung pump delivered with Premacon or Fumotec set-up...This Jung pump is prepared for fare larger machines than this loader and would probably be needed to be tuned down to 10-20% of max performance, if at all manage to fit it in the machine

[Lil Giants]

Magom got the Jung pump, but keep in mind that the motor/tank/ is Magom's own set-up (cheap) and will not perform as good as the same Jung pump delivered with Premacon or Fumotec set-up...This Jung pump is prepared for fare larger machines than this loader and would probably be needed to be tuned down to 10-20% of max performance, if at all manage to fit it in the machine

Depends on what Jung pump they're using, do you know?

[mcl fabrication]

I emailed them to ask specs. Need to know how high the bucket lifts if it doesn't load the Dump truck its a waste for me lol.
That is a good question. I own a magom track loader,1/16 bruder conversion and it just makes it into the dump truck. Being that the metal version is 1/14 scale it should be high enough.

[trucker n]

Joe the one they show for sale is 900

[Lil Giants]

Joe the one they show for sale is 900

900 what?

The numbers I see stamped on the Jung pumps is 4001, which is 0,15ml/rev, 4002 is 0,30ml/rev, 4003 is 0,45ml/rev... they go higher volume yet, but I don't know the serial #'s or values.

Anything more than 4002 - 0,30ml/rev is over kill for these little models with small bores & short strokes, especially if direct drive then 0,15ml/min would be sufficient. I think 380 - 420ml/min is the correct flow rate for these small models.

[Rimrock]

Depends on what Jung pump they're using, do you know?

It's the HR-7 / 4003. Magom does not use a reduction transmission, to keep cost down, installed a oversized motor in order to reduce the rpm. But I personally think it runs higher at full speed than the recommended 3-4000 max rpm for the pump. Too small tank (50-100 ml, vs Premacon 500 ml), no good cooling of the oil, which then more quickly gets hot and start foaming. Magom got much nice suff now, as the tracked loader, but they still got some way to go concerning their pumps, IMO.

[Mikem]

So do you guys think this is a good beginner shovel . I like the price . Is there someone else's pump to use?

[trucker n]

I think is a good starter them maybe later upgrade to leimbach pump and valves

[Northern Farmer]

I personally would go with the Carson LR634 but to each their own :)

[Lil Giants]

It's the HR-7 / 4003. Magom does not use a reduction transmission, to keep cost down, installed a oversized motor in order to reduce the rpm. But I personally think it runs higher at full speed than the recommended 3-4000 max rpm for the pump. Too small tank (50-100 ml, vs Premacon 500 ml), no good cooling of the oil, which then more quickly gets hot and start foaming. Magom got much nice suff now, as the tracked loader, but they still got some way to go concerning their pumps, IMO.

4003 is 0,45ml/rev, way too much volume for these tiny bore short stroke cylinders!

I started with that pump in my Fumotec 490, it was like operating a pneumatic system, too fast - kinda springy movements. I put that pump in my JD850 & with it's much larger cyl bores, it's perfect speed, especially on the twin 18's lifting the boom.

I doubt Magom pays any attention to this forum, so my words are meaningless... :rolleyes:

[Mikem]

But will a liembach pump and valves fit ? Can the motor as it is be slowed down ?

[Rimrock]

But will a liembach pump and valves fit ? Can the motor as it is be slowed down ?

I guess there are dimension sketches of both brand's pumps available at their web pages...look a bit around..

[mcl fabrication]

I was doing some reading and was enjoying the previous posting. So I started taking some measurement's of the ground clearance of my 1/16 Bruder 963 Magom conversion. I come to find that there are some area's of the undercarriage that are close to 10mm and some up to 20mm. But still you can fairly say there is much more clearance under the Bruder. Take a look n see!!

http://http://i1027.photobucket.com/albums/y332/mclrcfabrication/Mobile%20Uploads/1E993296-2154-4D84-82FE-4F3E96E29790_zpsdwpzfkn8.jpg (http://s1027.photobucket.com/user/mclrcfabrication/media/Mobile%20Uploads/1E993296-2154-4D84-82FE-4F3E96E29790_zpsdwpzfkn8.jpg.html)
http://http://i1027.photobucket.com/albums/y332/mclrcfabrication/Mobile%20Uploads/A878E6C6-1486-472C-A5F6-C129A2B72811_zpsskqztly3.jpg (http://s1027.photobucket.com/user/mclrcfabrication/media/Mobile%20Uploads/A878E6C6-1486-472C-A5F6-C129A2B72811_zpsskqztly3.jpg.html)
http://http://i1027.photobucket.com/albums/y332/mclrcfabrication/Mobile%20Uploads/DF42D438-A442-45E9-90C7-4D16ADF4D15A_zpsytv3vkph.jpg (http://s1027.photobucket.com/user/mclrcfabrication/media/Mobile%20Uploads/DF42D438-A442-45E9-90C7-4D16ADF4D15A_zpsytv3vkph.jpg.html)
http://http://i1027.photobucket.com/albums/y332/mclrcfabrication/Mobile%20Uploads/E0900B8D-035F-44CB-94A2-F31E73190968_zps6bsnlwki.jpg (http://s1027.photobucket.com/user/mclrcfabrication/media/Mobile%20Uploads/E0900B8D-035F-44CB-94A2-F31E73190968_zps6bsnlwki.jpg.html)
http://http://i1027.photobucket.com/albums/y332/mclrcfabrication/Mobile%20Uploads/16C6BEC2-C7E7-45AF-A986-40B64A90BB42_zpscn0neudi.jpg (http://s1027.photobucket.com/user/mclrcfabrication/media/Mobile%20Uploads/16C6BEC2-C7E7-45AF-A986-40B64A90BB42_zpscn0neudi.jpg.html)

[Cornbread]

Is it a bad thing that it is too low. What can it not do if it has no clearance.

[Bo Wallen]

Is it a bad thing that it is too low. What can it not do if it has no clearance. Get STUCK :eek:

[trucker n]

5584

[89pachanga]

Curious what did you pay for complete assembled kit and shipping?

[trucker n]

1600 with electrics too