Magom HRC Wheel loader

[Kausekaos]

They made a Wheel loader that will be available in a few months. Its on their Facebook page.

[TheBennyB]

Not on facebook. Whats different form there other wheel loader? I have their all metal 574.

[Kausekaos]

That I don't know sorry.

[Northern Farmer]

Googled their fb and found these pictures. L574 all metal to be ready for sale in 1-3 months according to Magom.

http://i68.tinypic.com/124bmzb.jpg

http://i68.tinypic.com/i1l4rl.jpg

http://i67.tinypic.com/x1eel4.jpg

http://i65.tinypic.com/29nyntz.jpg

http://i63.tinypic.com/6igsv5.jpg

[Efroeh]

Wonder what the price will be around

[Supermario]

:eek: I'll make sure my boss is sitting when I tell him I'm now interested in working some overtime :lol: If I get my hands on one of these, my tri fecta will be complete. Metal hoe, dozer and loader:bounce:

[Kausekaos]

I never did get my track loader. Didn't like the clearance on the Magom one and haven't justified the money for the Carson so I'm really curious about the price of this. My tag trailer is empty.

Reg the Dump should be completed very soon.

[thebigo]

Not on facebook. Whats different form there other wheel loader? I have their all metal 574.

I am sure it will be 1/14 scale vs 1/16 scale?

[TheBennyB]

right on, metal cab as well. Not rehashing the bruder cab. Bucket looks more robust as well.

[Kausekaos]

Think I want it

The L574 wheel loader is ready.
Production will start soon. Our team is working on the instruction manual.
Price (only model): 1399 €
Price (with hydraulics): 1769 €
Price (with hydraulics and electronics): 1819 €
Price (ready to run model, painted, without transmitter): 2799 €

Magom HRC Team

[roadranger]

So, is it out yet? It's not on Magom's website yet Jan. '17...

The price by the time you get a radio and ship it will be slightly higher than the Eagle 870 all metal wheel loader.

I wonder if this Magom loader will dig as good as the 45 lb. Eagle loader?
Eagle = 1 motor with driveshafts, rear axle locked.
What does this all metal Magom have for drivetrain?
And how much does it weigh?

The problem with Bruder conversions is that the plastic body makes it too light for good digging traction.
Most Utubes show the Bruder's working hard digging to come up with 1/2 a bucket, whereas the heavyweight Eagle just walks right in and digs a full bucket without breaking a sweat.

[TheBennyB]

So, is it out yet? It's not on Magom's website yet Jan. '17...

The price by the time you get a radio and ship it will be slightly higher than the Eagle 870 all metal wheel loader.

I wonder if this Magom loader will dig as good as the 45 lb. Eagle loader?
Eagle = 1 motor with driveshafts, rear axle locked.
What does this all metal Magom have for drivetrain?
And how much does it weigh?

The problem with Bruder conversions is that the plastic body makes it too light for good digging traction.
Most Utubes show the Bruder's working hard digging to come up with 1/2 a bucket, whereas the heavyweight Eagle just walks right in and digs a full bucket without breaking a sweat.

My play area is usually damp so on my Magom bruder conversion the stock tires would fill up and spin. I had some 1.9" rock stompers laying around so threw them on and filled them with bb's. Added 3 or so lbs and definitely more grip. Digs much better, less scale looking but more functional.
http://i1226.photobucket.com/albums/ee402/thebennyb10/IMG_2681_zpsx8us2qiz.jpg (http://s1226.photobucket.com/user/thebennyb10/media/IMG_2681_zpsx8us2qiz.jpg.html)
http://i1226.photobucket.com/albums/ee402/thebennyb10/IMG_2682_zpsqsc8qgyv.jpg (http://s1226.photobucket.com/user/thebennyb10/media/IMG_2682_zpsqsc8qgyv.jpg.html)

[cosworth34677]

So, is it out yet? It's not on Magom's website yet Jan. '17...

The price by the time you get a radio and ship it will be slightly higher than the Eagle 870 all metal wheel loader.

I wonder if this Magom loader will dig as good as the 45 lb. Eagle loader?
Eagle = 1 motor with driveshafts, rear axle locked.
What does this all metal Magom have for drivetrain?
And how much does it weigh?

The problem with Bruder conversions is that the plastic body makes it too light for good digging traction.
Most Utubes show the Bruder's working hard digging to come up with 1/2 a bucket, whereas the heavyweight Eagle just walks right in and digs a full bucket without breaking a sweat.

the big thing i find with all my conversion was weight! i put all kind of weight in my stuff antill i built my own metal loader.
there loader is out. but they sometime will take down something fromthe listing if they change something on upgrade something. i orderd a pump once and got a different one then the pic, when i emailed them they told me they where just about to take down the old pump, but i got mine before they could. and they sent me the new one, witch was better and the same price

[K-Man]

According to this video, it seems to do OK with digging (although loose dirt).

https://www.youtube.com/watch?v=2IvnQtNj4sA

But sometimes it could be due to operator not performing as good as the machine will allow (me think).

[TheBennyB]

According to this video, it seems to do OK with digging (although loose dirt).

https://www.youtube.com/watch?v=2IvnQtNj4sA

But sometimes it could be due to operator not performing as good as the machine will allow (me think).

Yea, that's the newer all metal version. Most concerns were on the bruder conversions they do where they retain some of the plastic, so less weight.

[Claus]

I like your Rock Crawler tires on your loader, I think the look works!

[roadranger]

That's a good idea using Crawler tires, and filling them with BB's should help out a lot on the 1/2 plastic ones digging power.

I would like a loader that can easily dig a full bucket out of a stockpile of any kind of material. Looks like those $3K+ all metal loaders can do the job…

Haven't seen a vid of any of these 1:14 size loaders loading up a truck or trailer.
Can they reach into the dump body without a ramp?

What's the drivetrain on the all metal Magoms?
540 motor to transmission, to transfer case, to differentials, to planetary wheel hubs?
I can see the driveshaft U joint at the hinge point...

And doesn't Magom's 1/2 plastic conversions use a motor at each wheel, instead of driveshafts? Don't see any driveshaft or U joint at the hinge point...

[TheBennyB]

Yup, the bruder conversions are motor at each wheel. Not the best power and a bit slow, but what i expect on an entry level machine I suppose. The bruder conversion is 1/16, (not sure what the all metal is) and can fill the box on my "jacked up Mack" with a little bucket wiggle.
http://i1226.photobucket.com/albums/ee402/thebennyb10/IMG_2636_zpsr0iyryxf.jpg (http://s1226.photobucket.com/user/thebennyb10/media/IMG_2636_zpsr0iyryxf.jpg.html)

[TheBennyB]

I like your Rock Crawler tires on your loader, I think the look works!

Thanks Claus. Still need to get a good session of nasty material moving to see if the tires slip at all on the wheels. bb's bulge them out a bit but so far so good on day to day operating.

[Northern Farmer]

I wonder if this Magom loader will dig as good as the 45 lb. Eagle loader?
Eagle = 1 motor with driveshafts, rear axle locked.
What does this all metal Magom have for drivetrain?
And how much does it weigh?

The problem with Bruder conversions is that the plastic body makes it too light for good digging traction.
Most Utubes show the Bruder's working hard digging to come up with 1/2 a bucket, whereas the heavyweight Eagle just walks right in and digs a full bucket without breaking a sweat.

I believe Magom's new FEL is 1/16 just like the Bruder one but in all metal instead. If that's the case there's quite a big difference in size & weight to Eagle's 870k. Borrowed this picture from Andy on here.

http://i68.tinypic.com/9pyw6o.jpg

[TheBennyB]

for sure, the eagle looks to be in the wedico size range. Almost 1/12 though depends on actual vehicle being represented. Same with the 4200 cab.

[roadranger]

I suppose should get the Eagle 870 pretty soon before Trump slaps big import taxes on anything built in China…

[RCP57]

I suppose should get the Eagle 870 pretty soon before Trump slaps big import taxes on anything built in China…

Probably not a bad idea. I've been reading that they are proposing a 100% tariff on European motorcycles in the 50cc-500cc range. If this happens it will mostly effect off-road models. Nothing in this displacement is offered by an American company so I'm not sure who's "jobs" this is going to protect in the US. The way I see it, many dealerships will go belly up if the price doubles putting employees out of work. Who can afford a 20K dirtbike especially if you are riding as a family and need multiple bikes?

[Northern Farmer]

I suppose should get the Eagle 870 pretty soon before Trump slaps big import taxes on anything built in China…

I suggest you purchase directly from Eagle machinery. On the plus side it comes with sound system and you can pay with paypal unlike RC4WD.

https://www.aliexpress.com/store/product/1-14-Scale-RC-Hydraulic-Wheel-Loader/347552_2027331309.html?spm=2114.12010608.0.0.hjvoM 2

[TheBennyB]

I believe paypal is going to add 4%. I've just gone through this with an ongoing order with eagle machinery. Was first told by Tang to do a bank transfer, now he wants money sent via Western Union. Also the New Year is coming in for them so unless you get your order in by Next week, you'll have to wait a couple weeks for orders to be processed.

[skeeter]

I believe Magom's new FEL is 1/16 just like the Bruder one but in all metal instead. If that's the case there's quite a big difference in size & weight to Eagle's 870k. Borrowed this picture from Andy on here.

http://i68.tinypic.com/9pyw6o.jpg

Wher to buy the FEl RC model from? Me likes it a LOT, from the pictures.

[TheBennyB]

Here's Magom's site.

http://www.magomhrc.com/en/7-rc-construction-machinery-

and one distributor of the eagle machinery 870K loader

http://store.rc4wd.com/114-Scale-Earth-Mover-870K-Hydraulic-Wheel-Loader_p_3828.html

[skeeter]

I like the looks & size of the RC4WD, but DON'T like the bank transfer policy. There's no buyer protection that way. If I X-fer funds & they don't deliver, I CAN'T get my $$ back.

I just may buy the Magon model, even though i like it less.

[Kaan]

I like the looks & size of the RC4WD, but DON'T like the bank transfer policy. There's no buyer protection that way. If I X-fer funds & they don't deliver, I CAN'T get my $$ back.

I just may buy the Magon model, even though i like it less.

You can talk with eagle machinary and pay with paypal. I never deal with rc4wd just because their interesting bank transfer policy, bought all my dozer, front loader and earth digger direct from eagle and paid with paypal with zero problem.
I had a magom loader and eagle front loader at the same time, magom was like a toy, weak and useless if you compare it with eagle mover.

[Mikem]

Kaan when did you buy the magon loader was it the new one they just came out with ?

[Kaan]

Kaan when did you buy the magon loader was it the new one they just came out with ?

I bought mine from Germany almost 10 months ago and sold it in couple of weeks later, it was half metal half plastic, whole metal front( metal frame) and plastic cabin,plastic engine cover etc. It was too light, you can barely dig or move the dirt around.

[Mikem]

Thanks Kaan good to know

[CAMODADDY]

I just got the newest loader they redesigned a couple weeks ago. The all metal drivetrain is sweet compared to individual gear motors. My only complaint is the solid rubber tires. They look great with Michelin molded in them but a RC4WD mil-spec tire with bb's will be much better. The pump is also extremely quiet.

[Rvjimd]

You going to make it to Pike Steam show with your new loader? I am planning on going and would love to see the new loader first hand! :cool:

Jim

[CAMODADDY]

You going to make it to Pike Steam show with your new loader? I am planning on going and would love to see the new loader first hand! :cool:

Jim

Yeah as of right now I am planning on going. Hope is isn't as hot as last year!

[Nissen]

https://www.dropbox.com/s/kmhdne8fidi3pft/DSC_2664.JPG?dl=0&m=

I got it.. But not paintet it yet :(