MFU lights ???

[tc1cat]

After installing a pair of PMD square headlights on my latest project, I found out that I now need 2 LEDS per side for the headlights. Can I just add an LED per side in parallel to the normal headlight LED or some other way? Thought about using the fog light LEDs so I would have seperate control for low and hight beams. Any help would be appreciated. I am installing a MFU in this truck.

Thanks,

Lynn

[Roadmasters]

As long as it is in parallel where it draws the same voltage as normal it would be fine.there is an extra plug in the mfu (number 14 I believe). You can use a tlu-01 light set but on the plug there is a ridge on one side that has to be removed for it to fit into the socket. I did it on my mfu and it was fine.

[tc1cat]

Thanks, What controls the extra socket? Is it controlled with the running lights?

[Roadmasters]

F I remember rite yes, I think it comes on with the clearance lights

[derailed]

how many lights you using?
just the 2 headlights per side?
i wired in an extra pair of leds parallel into one once
it turned out that one was brighter than the other