Rear Bumpers

[RCP57]

I've been busy making bumpers and related parts off and on for the last few days while I wait for the Gravel Train to be coated. I provide these bumpers with my truck dump bed kits but I also sell them separately. They fit standard Tamiya frame rails and mount using existing holes. The two stacks on the left are sold but that leaves me with some extras to sell. $30USD each, plus $5USD shipping. I can also drill them for lights upon request(@ $5USD charge per bumper).

Note: Canadian orders are subject to sales tax.

http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/IMG_8844_zpskyi5xlhl.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/IMG_8844_zpskyi5xlhl.jpg.html)

[Bo Wallen]

I see candy for The Bo-Dog's Thank You Reg. :)

[RCP57]

I made up some more bumpers. I also bought some of Russ's tail light bezels so that they could go with them upon request. The bumpers need a bit more cleanup but you get the idea. The V shape would be perfect for a heavy haul or dump truck.

http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/IMG_9093_zpsds6owkta.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/IMG_9093_zpsds6owkta.jpg.html)

[Bo Wallen]

Goodies Reg. I need some and then i need some different ones also.
( Did u see anything strange on earlier picture i posted ? :D )

[RCP57]

Goodies Reg. I need some and then i need some different ones also.
( Did u see anything strange on earlier picture i posted ? :D )

Yes I did notice that. Even on the front!:eek:

[Bo Wallen]

Yes I did notice that. Even on the front!:eek:
Super sturdy for Snowplow attachment. :cool:

[ScottLay]

Gonna need a pintal hook, D-rings , and trailer light plug on the V one...
Oh I forgot glad hands too... Lol

[RCP57]

Gonna need a pintal hook, D-rings , and trailer light plug on the V one...
Oh I forgot glad hands too... Lol

I couldn't agree more.

[RCP57]

I have this one up for sale. It is powder coated black to match stock frame rails. You get all of what you see pictured with this one. Flaps, brackets, bezels/lenses, mounting bolts, ect.

$80USD

http://i1293.photobucket.com/albums/b588/RCP57/IMG_0224_zps5p2qlhje.jpg (http://s1293.photobucket.com/user/RCP57/media/IMG_0224_zps5p2qlhje.jpg.html)

[Goodison]

How is it going,Reg. I think that I Need to get that bumper for my truck.

[RCP57]

How is it going,Reg. I think that I Need to get that bumper for my truck.

Email replied Bart.

[RCP57]

I have this one up for sale. It is powder coated black to match stock frame rails. You get all of what you see pictured with this one. Flaps, brackets, bezels/lenses, mounting bolts, ect.

$80USD

http://i1293.photobucket.com/albums/b588/RCP57/IMG_0224_zps5p2qlhje.jpg (http://s1293.photobucket.com/user/RCP57/media/IMG_0224_zps5p2qlhje.jpg.html)

Bumper sold. If anyone is interested please let me know and I will make more.

[RCP57]

I'm making some more bumpers if anyone is looking for them.

http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/IMG_0482_zpsdvhg2elg.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/IMG_0482_zpsdvhg2elg.jpg.html)

Reg

[RCP57]

I made up a few more bumper combos today.

https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/19732109_347463499007056_136511206440416881_n.jpg? oh=bf83a3bf6406ffaab266dfda9d4141e2&oe=5A02B528
https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/19959176_347463532340386_3640411787346504633_n.jpg ?oh=98a1e8a38629c733b3d03a6a850cc51e&oe=59CC4F29

[Claus]

Looking great! PM sent.

[RCP57]

Here's the image I was trying to upload yesterday. PB is a real POS but the bumpers are nice!

http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/19732109_347463499007056_136511206440416881_n_zpsh eel5ghh.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/19732109_347463499007056_136511206440416881_n_zpsh eel5ghh.jpg.html)

[Claus]

Drool all over my keyboard.

[Bo Wallen]

Time for drool bucket again Reg. Nice work on the tiny machine.





P.S. other bucket not so much.

[RCP57]

Thanks guys. These have sold quickly so that is good. Only a couple left so I will make more this week on the mini mill. Slow and steady.lol

[Mustang46555]

Hang on to one for me! The L9000 box confirmation is only a week or so away!!!!!!

[RCP57]

Hang on to one for me! The L9000 box confirmation is only a week or so away!!!!!!

No problem Dennis. I made some more today!

[RCP57]

I got these back from coating today and they are selling quickly.:bounce::bounce:


http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/IMG_0509_zps1vu1qxyn.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/IMG_0509_zps1vu1qxyn.jpg.html)

[RCP57]

I got these back from coating today and they are selling quickly.:bounce::bounce:


http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/IMG_0509_zps1vu1qxyn.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/IMG_0509_zps1vu1qxyn.jpg.html)

I'm getting some more of these done this coming week if anyone else is interested.

I also just setup this one with a Garden Trucking pintle hitch. The hitch comes setup with the chains installed on the truck side so I made up some rings on the bumper to change it around to the correct setup. I also drilled two sets of mounting holes with a 4mm offset to adjust the height if necessary. I'm not sure if it's visible in the photos but the hook on the left is much larger than the one on the right. Not sure what happened there:confused::confused:

http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/IMG_0686_zpstb7vxojx.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/IMG_0686_zpstb7vxojx.jpg.html)
http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/IMG_0687_zpsa5rznl4e.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/IMG_0687_zpsa5rznl4e.jpg.html)

[skeeter]

In the pics above, where the small jam nut is, on the pintle eyelet, can you custom make one that would be 5 inches long, from that nut? I need a compensator for a PNW stylr logging truck I will be building this winter. I think.......................there I go thinking again...............IF I did math right (NOT good at math) 5 inches, in 1/14 scale should equal 9 feet of real life?

[skeeter]

I ONLY need/want the farthest away from the eye, the last quarte of an inch threaded. The rest would need to be smooth.

[RCP57]

I ONLY need/want the farthest away from the eye, the last quarte of an inch threaded. The rest would need to be smooth.

I didn't make the pintle hitch. It is from Garden Trucking(Precision Model Distributors).

[Claus]

Now you're talking Reg!!! Sign me up!

[RCP57]

Now you're talking Reg!!! Sign me up!

OK!:bounce::bounce: I will drop it off to be coated on Tuesday(black right?). It's a holiday here tomorrow for the privileged people that have Monday to Friday type jobs.:rolleyes: Hopefully I will have it back before the end of the week.

[Claus]

Yes Sir, gloss black. No hurry. Thank you.

[RCP57]

Are you sure you want gloss? All the rest are velvet black(semi gloss) and that matches stock frame rails very well.

[Claus]

OK, you know what you're doing, make it semi gloss!

[RCP57]

OK, you know what you're doing, make it semi gloss!

Let's not get silly with the compliments.lol

[frizzen]

In the pics above, where the small jam nut is, on the pintle eyelet, can you custom make one that would be 5 inches long, from that nut? I need a compensator for a PNW stylr logging truck I will be building this winter. I think.......................there I go thinking again...............IF I did math right (NOT good at math) 5 inches, in 1/14 scale should equal 9 feet of real life?

Depending on the thread of the pintle why not try some aluminum rods like rock crawlers use for links?

5" in 1/14 is 5.8 feet.
7.714" in 1/14 is 9 feet or 195mm

http://www.axialracing.com/products/ax30518 so if the lunette ring uses m3 x.5 then 2 of these would work, and get a m3 setscrew to connect them for 196mm.

[RCP57]

The next batch of bumpers are ready to ship....

http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/IMG_0706_zpsejr6vkwr.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/IMG_0706_zpsejr6vkwr.jpg.html)

Custom order with PMD Pintle hook

http://i1293.photobucket.com/albums/b588/RCP57/RCP%20shop/FullSizeRender_zpsvxwyzqrd.jpg (http://s1293.photobucket.com/user/RCP57/media/RCP%20shop/FullSizeRender_zpsvxwyzqrd.jpg.html)

Reg

[Claus]

Looks great! My Peterbilt will be happy.

[Claus]

https://c1.staticflickr.com/5/4343/36492714032_2df87ef1ee_k.jpg
https://c1.staticflickr.com/5/4387/36662123795_5a0c33199d_k.jpg
https://c1.staticflickr.com/5/4374/36662117505_b17d75491c_k.jpg

I carried the backing plates over from my PMD hangers and the mudflaps are from ExClusive RC, it all fits together perfect. I'm very happy Reg!

[RCP57]

Wow that arrived quickly and looks great Craig! Thanks for posting the pics!

[Northern Farmer]

Nice :cool: