PDA

View Full Version : New "SmallHaul" Youtube channel


SmallHaul
01-20-2011, 09:48 AM
I figured it was time to make a new "SmallHaul" youtube channel that just has rc equipment on it. All new videos will be posted here.:)

http://www.youtube.com/user/SmallHaul?feature=mhum

Claus
01-20-2011, 12:31 PM
Nice Scott. I watched the video of you loading the Mack with the dragline, you have a lot of patience. That Mack goes through anything, even when the wheels aren't on the ground it plow through.

D8R
01-20-2011, 02:00 PM
Nice vid, Thanks for sharing
Mack is a Bruder I guess, but what chassi under?
Dan

SmallHaul
01-20-2011, 03:12 PM
Nice Scott. I watched the video of you loading the Mack with the dragline, you have a lot of patience. That Mack goes through anything, even when the wheels aren't on the ground it plow through.

Thanks, The rear suspension is completely stock and the front probably has almost twice the movement of the rear (not too much:-). It is hard to get it stuck though because the rear most axle is locked and the other 2 act like limited slip diffs because of my rubber washer mod to the diffs.

Nice vid, Thanks for sharing
Mack is a Bruder I guess, but what chassi under?
Dan The chassis is KH frame rails cut down and all of the axles are tamiya semis with a tlt axle in the front.

Stock KH frame rails before shortening.

http://i240.photobucket.com/albums/ff66/scottmaxxin/3-2.jpg

http://i240.photobucket.com/albums/ff66/scottmaxxin/bottom.jpg



Build thread for Mack:

http://rctruckandconstruction.com/showthread.php?t=495&highlight=mack+dump+truck

RCTech9
01-20-2011, 06:30 PM
Subscribed!!!

Stuff
01-20-2011, 11:40 PM
subbed!

chaseracer
01-21-2011, 12:23 AM
Subscribed, great conversions and good videos

SmallHaul
01-24-2011, 09:16 AM
Thanks Chaseracer!

On-board the wheeled skid steer:

http://www.youtube.com/watch?v=jevIUjOVN7M

SmallHaul
03-19-2011, 09:30 AM
Mike (user name mikemike) came over to haul some dirt.

http://www.youtube.com/watch?v=F3quTAJIHq8

9W Monighan
03-19-2011, 09:42 AM
Do we get to see the undercarriage project yet?

SmallHaul
03-19-2011, 09:58 AM
Do we get to see the undercarriage project yet?

I haven't touched it since I went to the ECMT meet and I just sold 2 more rubber tracked loaders so, it will be a couple of weeks before I continue building it again. Of all people Steve, I thought YOU would have more patience, HA!;):D

SmallHaul
03-20-2011, 12:37 PM
Another video of when Mike came over. I might have been harassing the new guy a bit when he was running the skid steer..:D

http://www.youtube.com/watch?v=9kk-0UhURZk

steamer
03-20-2011, 01:31 PM
Hey Scott. Looked good when you filled his cab full of dirt. LOL
Rob

Mikemike
03-23-2011, 09:50 PM
Hey now stop picking on me LOL