2000 Freightliner COE

[skl1cent]

a new challenge, this is a truck no one else has, atleast I havent seen one.
I like to be different so here I go :)

http://i581.photobucket.com/albums/ss253/azncents/C-092-3.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09193-1.jpg

[Dreamweaver]

Lookin good, nice start Silvio.

-Mike

[fhhhstix]

You are as bad as me Silvio you start some thing new before the others are finished.:D

Travis

[Dreamweaver]

You are as bad as me Silvio you start some thing new before the others are finished.:D

Travis


Hey I can tell ya how to fix that problem... It's call OCD.. works for me:D

[skl1cent]

thank you guys!!!! I hope you will like the end result heheheh im working hard to make this one nice :)

[Cossett]

Hi skl1cent, if your past is any thing to go by this will be another ripper :D have you finished that Mack yet ?

Cheers Tracy:D:D

[skl1cent]

hehe thanks Cossett and no mack isnt done yet im waiting for my plastic to arrive, i ordered 96 sheets so ull see a whole lots of work coming out of here LOL i need to step up the game a bit :)

[Brian in PA]

This is gonna look good Silvio!

Brian

[Tamiya Cowboy]

Looking good Silvio good to have you over here cant wait to see more..

[tc1cat]

Great start!! I do like the look of any type of COE!!! Except the foriegn ones:mad::mad: Hint to Tamiya:rolleyes::rolleyes:

[skl1cent]

thanks guys!! :) and yea I dont like euro COE's much either, their too like advance looking not sure LOL its weird. But ye I like building old style american workhorse trucks :) Idont really like show trucks either with the long frames n stuff , the only reason I would do a long frame is if the truck has a extra large sleeper LOL thats about it LOL

[skl1cent]

update.

http://i581.photobucket.com/albums/ss253/azncents/DSC09195.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09203.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09205.jpg

[Stylin n profilin]

Looking good man...Now like Tracey said....Where's the Mack:D:D:D:rolleyes:

[skl1cent]

haha its coming its coming my plastic hasnt shown up yet lol i coule only make these parts bc its .100 LOL

[Heavy Metal]

This is gonna be cool. Looking forward to this one. Hope you keep postin' at each step like this Silvio....I need a lesson on fabrication! Joe

[SmallHaul]

Looking good, cool cab.

[skl1cent]

thanks guys :)

[skl1cent]

little update :)

btw guys I do know the hole behind the fender is too close LOL but dont worry im taking that whole back section off
you will see why later :) so i needed to not have that piece there i didnt want my fender to be glued to that :)
keep tuned for more :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09258.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09257.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09254.jpg


GOT PLASTIC? HECK YEAAAAA!!!!!! guys prepare to see a ton of projects arise from all this plastic goodness! :)
http://i581.photobucket.com/albums/ss253/azncents/DSC09261.jpg

[fhhhstix]

Looks like you have plenty of material for building. "GOT PLASTIC" well yes I do 20 2ft X 4ft pieces I have 4 2ft X 4ft pieces of .020 .040 .060 .080 .100

http://i574.photobucket.com/albums/ss185/brokenb4/100_0560.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/100_0561.jpg

Travis

[skl1cent]

very niec man hahahha!

[sneaky-pete]

Nice job so far......no wonder I cant find plastic....you have it all lol!:D

[skl1cent]

HAHAHHAHAHHAHAH!!!! thanks man!! :)

[skl1cent]

Bit of repair work done on the side of the cab to give it its solid look :)
still need to cut out the back behind the wheel fender and figured out how
to make the side steps im trying to follow it now :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09326.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09324.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09329.jpg

i need to go in do second hand of putty even out the body there

http://i581.photobucket.com/albums/ss253/azncents/DSC09327.jpg

now to cover up the light buckets :) and make that step I will be back with result soon :)

[REEVE2007]

Looking good!:D

[russisloud]

getting there

[skl1cent]

yup yup its pretty close so far so good :))

[RAIDERS]

looking good...keep up the good work.

[skl1cent]

thanks man :)

update

http://i581.photobucket.com/albums/ss253/azncents/DSC09331-1.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09334.jpg


http://i581.photobucket.com/albums/ss253/azncents/DSC09333-1.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09332-1.jpg

[skl1cent]

i would call this mega update lol but its really not that massive LOL so mid-mega LOL

http://i581.photobucket.com/albums/ss253/azncents/DSC09338.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09340.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09341.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09342.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09343.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09348.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09346.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09347.jpg

[russisloud]

the cab is really starting to take shape.

[skl1cent]

thanks Russ :)

[sneaky-pete]

Nice job....its getting there!

[nenard]

Realy kool Silvio. Fantastic styrene work.

[skl1cent]

thanks guys :)

[skl1cent]

little side steps done :) need a little sanding n then mounting but will work nicelyyyy :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09349.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09350.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09351.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09353.jpg

[skl1cent]

after a bit of cutting and sading here is what we gottt! :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09354.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09361.jpg

[REEVE2007]

Looks great...really starting to take shape now;)

[skl1cent]

sure is bro :)

[Bigrigger]

Looking good Silvio!:D Can't wait to see it all filled and sanded!:D

[skl1cent]

thanks :)

[skl1cent]

time to build this beasts body :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09375.jpg

[REEVE2007]

Oh yeah!

[skl1cent]

frames together now :)and its looking gooood :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09379.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09380.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09383.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09385.jpg

[Brian in PA]

Looks good Silvio,nice progress!

Brian

[skl1cent]

thanks man :)

[skl1cent]

vote

longer rails or no?

http://i42.photobucket.com/albums/e326/lawrenreeves/freightliner%20cab/DSCN1121.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09386.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09387.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09388.jpg

[skl1cent]

welp its becoming 1 piece now :) its time to sand the heck out of it! :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09452.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09453.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09454.jpg

[Bigrigger]

No! Frame is a good length! Also, great progress on the truck! :D

[skl1cent]

thanks bud :) hehe im spending some quality time with it now lol sanding the crap out of it LOL

[Bigrigger]

LOL Have fun! :D

[skl1cent]

after a gooooooood sanding :) here is what we got :) still requires more work in some areas, but its getting there :) im pretty happy with the results so far :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09459.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09460.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09461.jpg

[Zimms Customs]

I would say keep the frame at its current length. Body work is looking good!

[skl1cent]

thanks man :)

[skl1cent]

time to build another chasis :)

time to build another KH :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09474.jpg

[Heavy Metal]

She's looking REAL nice Silvio. Just fantastic body work you are doing. Love it. Joe

[Bigrigger]

Looking good Silvio! I can't wait for more!:D

[Dreamweaver]

Looks pretty sweet Silvio.:cool:

[skl1cent]

thanks guys! its coming out pretty clean :) im loving it :) im almost done building the second chassis :) hehe then ill let you guys know what it is when im done LOL

[skl1cent]

okie dokieeee both chassises are built.. wait what? chassises?? hmmm LOL
I will show u guys whats going on with the second one in a little bit :) I need to get more done on that baby :) but its coming along sweeeeeet :)

btw anyone know how i can cap the tanks? there its close to the wheel, thats exactly the place where it belongs. Anyone ever tried shortening the side caps?

http://i581.photobucket.com/albums/ss253/azncents/DSC09479.jpg

[JAMMER]

A piece of glass and some 600 wet and dry sand paper and keep it wet. Ed

[Darkrider]

Heh you are a building beast there silvio!

[skl1cent]

ok here is my new challenge.....

floor.
http://i581.photobucket.com/albums/ss253/azncents/DSC09485.jpg

floor in cab perfect.
http://i581.photobucket.com/albums/ss253/azncents/DSC09486.jpg

floor on frame stock KH tranny NOt soo muchh..
http://i581.photobucket.com/albums/ss253/azncents/DSC09487.jpg

Floor up cab happy, tranny happy, but electronics not happy..
http://i581.photobucket.com/albums/ss253/azncents/DSC09490.jpg

move tranny backwards, cab is very happy..electronics very happy..Headache rack? not happy...

http://i581.photobucket.com/albums/ss253/azncents/DSC09492.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09494.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09495.jpg

I need help guys, anyone know a good tranny I could use that will go absolutely
below the rails? I could cut the floor n make the stock tranny work, but then that
means the battery tray will be of no use and everything is gonna be flying around
inside there not cool

if anyone knwos a good tranny alternative please let me know :) thank you in advance :)

[Tamiya Cowboy]

You can run a R2 I run them in my trucks that dont have much room in them. or the buyer could switch to lipo and have plenty of room..

[Tamiya Cowboy]

Here I set it al little higher then i needed too but you can mount it lower.

http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/007-7.jpg

[tc1cat]

I agree with Paul on this. Use an R2. Great tranny and very compact. I have them in 2 of my trucks. 1 is mounted to the floor of the cab. Lots of room for everything then.

Lynn

[skl1cent]

coool thanks guys I'll give it a shot :)

[skl1cent]

ok guys welp took some advice :) cut down the floor n flipped, works like a charm :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09512.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09515.jpg

I moved the front wheels up a bit, tilted the mount there now I have to modify that cross member to put a bolt n nut instead of screw to hold the mount in that position giving me a little bit more room, what happened b4 is I couldnt mount the little side step, the wheel was a little bit too bad it would hit the side step when turning very bad, so now moved up works greatt!

http://i581.photobucket.com/albums/ss253/azncents/DSC09517.jpg

and here is what she looks like with a trailer!
http://i581.photobucket.com/albums/ss253/azncents/DSC09513.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09514.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09516.jpg

more to come soon :)

[Stylin n profilin]

Looking great Silvio...Really nice job on this for sure:D

[skl1cent]

thanks man :)

[skl1cent]

Welp first light installed now :) as you guys can see the body isnt that smooth right now as well,
so I still have alot of sand work to be done LOL but once its complete its gonna be top notch
this is still my rough draft I would say :)


http://i42.photobucket.com/albums/e326/lawrenreeves/DSCN0417a.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09522.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09524.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09525.jpg

[skl1cent]

you guys wanna watch a video go HEREEEE!!! LOL DRIVINGGGG LOL Donnie aka REEVES he threw the keys at me and i took it for spin, but since i never driving a truck I started it in reverse gear LMAOOOO!!!!!!!!!!!!!!!! that explains my sound glitch LOL


http://www.youtube.com/watch?v=avzbvxTNoLs&feature=channel_video_title

[skl1cent]

now both lights are in :)
http://i581.photobucket.com/albums/ss253/azncents/DSC09535.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09536.jpg

I noticed the gap was too big btween the little air intake and the grill top so I raised it up :) much bettter now :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09542.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09544.jpg

[BRICKNICK]

That freight shaker is looking good, but what's the other chassis for? Keep up the nice looking cab over build.

[skl1cent]

the other chasis heheheheh it will be another freightliner, the one Reeve's trucking all started with :) another challenge for me! :)

http://i42.photobucket.com/albums/e326/lawrenreeves/DSCN1330.jpg
these trucks will be awesomeeeeeeee!! i cant wait to get onto that 79 :) it'll be great :) as u see how much attention I already pay to detail LOL both of these trucks will be top notch :) im getting better n better at this :)

[BRICKNICK]

I'm a huge fan of the old cab overs such as the 70-85 k100s, Pete 350 + 352, freightliners. Can't wait to see the 79.

[Tamiya Cowboy]

Looking great man keep up the good work..

[skl1cent]

thanks guys :) and yea I love old COE's I think of all the freighliners are probably my very favorites :) hence y I started this build in the first place LOL I didnt know some1 would want to buy it and turn it into a different truck :) hehe which means I willl build another one for myself once I am finished LOL

my original plan was to build it a the wrecker from terminator 2 :) that black one from the chase :)

from here :)
http://www.youtube.com/watch?v=msdCQoZhiEY&feature=related

but this is greatttt I just love the freighliners overall :) and I'm glad everyone appreciates all the hard work n details I put into this build to make it look exactly like the 1:1 :)

[skl1cent]

cleanin up

http://i581.photobucket.com/albums/ss253/azncents/DSC09603-Copy.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09604.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09602-Copy.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09606.jpg

[mmman67]

looking good !!!!!

Mike

[skl1cent]

updateee!

capped tank with globeliner ending.

http://i581.photobucket.com/albums/ss253/azncents/DSC09656.jpg

the truck
http://i581.photobucket.com/albums/ss253/azncents/DSC09657.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09659.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09660.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09661.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09662.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09663.jpg

[skl1cent]

here is the chain rack im putting together, Still needs detailing and skinning but its taking shape :)

http://i581.photobucket.com/albums/ss253/azncents/DSCN1230.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09760.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09761.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09762.jpg

I need to get the rack over the tranny will do do by adding height to the rack as the real one has
its got a pretty thick floor.

http://i581.photobucket.com/albums/ss253/azncents/DSC09763.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09765.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09766.jpg

[REEVE2007]

That is going to look sweet

[fhhhstix]

Great job Silvio your skills are getting better with each build keep it up.

Travis

[Bigrigger]

Yeah!!!!!!!!! You keep getting better at this!:D

[skl1cent]

thanks guys ;)

[d.k.v]

To get it to fit over the trans you should build a small box on the base

[skl1cent]

lol bro ur reading my mind or something? LMAOOOO yes thats actually exactly what I was thinking :) hehe I just hope that its gonna be about scale height you know? like, hmm im not exactly sure how tall it would have to be yet LOL not to mention I need to figure a way to mount it LOLL

[d.k.v]

You could put a full width box thats 1:1 about half a foot high or just a small handy man style tool box

[skl1cent]

OMGGGGGGGGG WHAT A RACKKKK!!! WOWWWW LOL I JUST HADDD TOO!!!! LOL
sry to any ladies that may find this offensive LMAOO!!!

http://i581.photobucket.com/albums/ss253/azncents/DSC09780.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09781.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09782.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09784.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09785.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09786.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09787.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09788.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09789.jpg

it sits a bit taller than what I really wanted it to be, but ****, I cant do anything
about the trasmission and it looks beautiful I would hate to have to cut er down.

[d.k.v]

Very nice rack haha. Whats the clearence between the rack and the trans

[skl1cent]

hehe there is no clearance LOL its basically sitting right on top of it LOL

[skl1cent]

added little walking floor I guess you call this, its gonna have 1/16th diamond plate on it its gonna complete the look :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09790.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09791.jpg

cabby is now officially mouted, woooot!

http://i581.photobucket.com/albums/ss253/azncents/DSC09792.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09794.jpg

[d.k.v]

whats going in the gap under those mounting screws?

[CORVETTEJOEY]

nice work as always silvio!
joey

[Hockeydad]

That Freightliner looks spot on!!! Good job.

[skl1cent]

a step is going in that gap :) heh thanks everyone :)

[skl1cent]

shes 100% :) wooooooooot! all body work completed. needs a little minor putty work on the back but thats easy!!
shes going in for paint on saturday :) n then shes gonna be allll rdy to gooo! :) I'm def gonna miss her alottttttt
she's beautiful, I will have to build another one for myself someday very soon I hope :)

http://i581.photobucket.com/albums/ss253/azncents/DSC09818.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09820.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09823.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09824.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09825.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09826.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09827.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09828.jpg

[d.k.v]

She is beautiful mate

[Brian in PA]

looks real good there Silvio!

Brian

[tc1cat]

WOW!! You really have caught on on how to use styrene! Excellent build. All it lacks is the paint:rolleyes:

[sneaky-pete]

very nice work:eek:

[skl1cent]

thank you guys :)

[Tamiya Cowboy]

This turned out looking great cant wait to see it all painted up.

[Dreamweaver]

Look perfect Silvio.. The headache rack looks spot on. Great job!!

[skl1cent]

thanks guys :) shes goin for paint 2mrw :)

[Bigrigger]

Looking good as usual Silvio! Can't wait to see it in paint! I'm as excited as you are... That is one great rack!:D I really like the rib design, it looks spot-on!:D

[skl1cent]

here I added the 80T motor and transmission shifting and steering are rdyy!
http://i581.photobucket.com/albums/ss253/azncents/DSC09840.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09841.jpg

[d.k.v]

How slow is the 80t in first?

[hawgfanman]

How slow is the 80t in first?
x2. I was thinking about the 80t for my King but I'm worried it may be too slow.

[skl1cent]

well dont be worried :), it has plenty of speed and power :) thoo I would say if you realllly want to speed a little bit and still have power go with a 55T that'll work nicely for ya bud :)

[Stylin n profilin]

Well guy's..Here's where its now...:D:D

http://i883.photobucket.com/albums/ac33/Stylinpete/Paint%20jobs/0424011747.jpg

http://i883.photobucket.com/albums/ac33/Stylinpete/Paint%20jobs/0424011747a.jpg

http://i883.photobucket.com/albums/ac33/Stylinpete/Paint%20jobs/0424011748.jpg
Now before clear:D
http://i883.photobucket.com/albums/ac33/Stylinpete/Paint%20jobs/0424011957.jpg

http://i883.photobucket.com/albums/ac33/Stylinpete/Paint%20jobs/0424011951.jpg
Now after cleared..when its dry I'll wet sand and buff then back to the builder..:D:D:D

http://i883.photobucket.com/albums/ac33/Stylinpete/Paint%20jobs/0424012031c.jpg

http://i883.photobucket.com/albums/ac33/Stylinpete/Paint%20jobs/0424012029.jpg

http://i883.photobucket.com/albums/ac33/Stylinpete/Paint%20jobs/0424012030.jpg
:eek::eek::D:D

[skl1cent]

SWEEEEEEEEEEEEET

[will43209]

Very nice!! I only drove one cab over in my life--and I was nervous!! No fenders or hood to go off of. It felt like I was driving a tour bus. I miss BJ and The Bear! My favorite TV show. Great build!

[skl1cent]

haha nice :) thanks man :) I've never driven a real truck lol would love to one day :)

[d.k.v]

haha nice :) thanks man :) I've never driven a real truck lol would love to one day :)

Just like a car just more gears and its alot bigger.. you can do it

[Espeefan]

Man, this is one of your best cabs yet. I think you nailed the look perfectly, and I'm curious if this is going to become one of Donnie's (Reeves) trucks? It's going to be a great replica. Nice job.

[REEVE2007]

I have to say that for some reason this is my favorite build yet:D;)

[Tamiya Cowboy]

LOL I wonder why Donny.. Did you use my line on the wife to pass this one by her..LOL Anyways that looks perfect Silvo and Jon you guys did a outstanding job nice work..

[skl1cent]

me and John are the A Team LOL i do cabs and he paints LOL I think i gotta make this official now :) heheheh sell fully completed cabs and trucks :)

[REEVE2007]

...you guys are like the A,B AND C team. That color came out smokn:D


me and John are the A Team LOL i do cabs and he paints LOL I think i gotta make this official now :) heheheh sell fully completed cabs and trucks :)

[REEVE2007]

If you ever make it out West we'll change that


haha nice :) thanks man :) I've never driven a real truck lol would love to one day :)

[REEVE2007]

She didn't think I was crazy when we started this one...it was when she found out there was 3 in the works :D...for some reason they just don't understand sometimes;)


LOL I wonder why Donny.. Did you use my line on the wife to pass this one by her..LOL Anyways that looks perfect Silvo and Jon you guys did a outstanding job nice work..

[BRICKNICK]

This truck looks awesome, great job guys. The body work is spot on to the 1:1 and the paint looks great on that truck.

[skl1cent]

Lots of pix for you guys! :) hehe basically all finished up few more touches and she'll be in Reeve's Hands :) heheheheh

http://i581.photobucket.com/albums/ss253/azncents/DSCN1123.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSCN1120.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSCN1117.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09978.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09979.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09980.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09981.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09982.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09983.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09984.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09985.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09986.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09987.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09988.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC09989.jpg

[russisloud]

i got ta say, that came out very nice!!!

[skl1cent]

hard work pays offf!!! whewww took me like the whole day to get it right.
Colors on the door parts are alittle off but I cannottt get my printer to match colors :( but it isnt bad I think overall the truck came out great with all my extra detailing :)

http://i581.photobucket.com/albums/ss253/azncents/DSC00034.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00035.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00036.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00037.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00038.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00039.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00041.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00042.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00044.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00045.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00046.jpg

[FreddyGearDrive]

Just beautiful!The graghics put it right where it belongs! Nice job!
FGD

[tc1cat]

Excellent work all the way round:D:D Great looking truck!

[hippy]

wow is that ever an incrediable build! my dad use to run a coe frieghtshaker. well done!

[texken]

Try printing on Avery Clear Labels.

Might work.

TEXKEN

[glorydays24]

Everything look's great bud, can't wait to see what you'll come up with next. :cool:;)

Big John

[skl1cent]

what happens with clear is that the ink is then too light for the designs so then you cannot see them thought dark paint clear decals only work on whites or brights :( suckssss!

Thanks John here some more pix I put the glass materials in and now shes rdy to be packed n shippped! wooohooooo!!!!

http://i581.photobucket.com/albums/ss253/azncents/DSC00057.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00058.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00059.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00060.jpg

http://i581.photobucket.com/albums/ss253/azncents/DSC00061-1.jpg