View Full Version : custom aluminum & steel tamiya wheels
ihbuilder
02-14-2011, 07:54 PM
This is how I work things with my wheels ,sold by the axle . When you order them I need to know how many axles including front . Front axle is assumed standard non-driven unless specified differently . Rear axles are assumed duel wheels unless specified differently . prices are for the base raw aluminum wheel assembly . WHEELS CONSIST OF 2 HUBS 4 WHEELS /REAR AXLE 2 WHEELS /FRONT AXLE .
hole options available now
http://i830.photobucket.com/albums/zz230/ihbuilder/PIC_0839.jpg
http://i830.photobucket.com/albums/zz230/ihbuilder/PIC_0671.jpg
http://i830.photobucket.com/albums/zz230/ihbuilder/PIC_0604.jpg
http://i830.photobucket.com/albums/zz230/ihbuilder/PIC_0611.jpg
{ I'm no longer offering NON polished wheels }
All prices + shipping
base:
1 rear axle - $64.00 polished
1 front axle - $40.00 in a stand alone set polished
1 front 1 rear axle polished - $98.00
1 front 2 rear axles polished - $172.00
Options :
powder coating ( steel buds ) - $2.00/wheel (white)
super single ( front or rear ) - P.O.R.
driven front axle in super single or standard - no change
rc4wd hub nuts ( all ) ( I prefer you supply them )
center mount super single - P.O.R.
hub covers :
stemco look alike
baby moons
more hole shapes available in future
also 5 & 6 spoke daytons
I'll have update pics soon (dead cam :mad:)
Steve
texken
02-14-2011, 08:13 PM
Hi Steve what tire size?
Do you have 2-1/2 " tires also?
I need only four tires and rims. Only two axles on my LTM 1030.
TEXKEN(ken)
ihbuilder
02-14-2011, 08:25 PM
Ken these are 1.7 Id . I can make what ever size you want
I have a lot more to come + up date my pics , they're terrible :o
woodhog
02-14-2011, 08:46 PM
i wanted some super singles to run on a peerless i built . i talked to you a while back makin sure im still on the list . they are for tamiya axles:cool:
ihbuilder
02-14-2011, 09:26 PM
i wanted some super singles to run on a peerless i built . i talked to you a while back makin sure im still on the list . they are for tamiya axles:cool:
your on the list They will look like this from the back
http://i830.photobucket.com/albums/zz230/ihbuilder/PIC_0893.jpg
Just a note to all . Those that have ordered are on the list . I am currently booked till the end of March with another months worth building up . It will be this way until I get a CNC lathe.
woodhog
02-15-2011, 08:51 PM
can the super singles be wider and what tire could you use ,more like the 445 series super singles on late model trucks,trailers:)
ihbuilder
02-15-2011, 08:56 PM
can the super singles be wider and what tire could you use ,more like the 445 series super singles on late model trucks,trailers:)
as of now as far as I know we're stuck with the tamiya width I check into it I would like to get as wide and low profile on these for my lonestar build .
cummingsman29
02-25-2011, 10:12 AM
Pm sent on rims!!
ihbuilder
12-20-2011, 12:40 PM
just a Note to all . with the new production I have switched over to all 2mm (metric) bolts for lug bolts . most prvious are 2/56 (std) bolts
ihbuilder
12-22-2011, 10:32 PM
I have to give half the credit for these wheels to the guy who made the blanks for me . With out his help we all be still waiting , thank you Jeff @ JP machining :) . I was trying to keep close to home with my out sourcing but it just didn't work out , But hey , they're still made in the states :D .
on the front hubs , If you wish to put 2mm acorns on in the future , you screw the bolt in from the inside of the hub .
BRICKNICK
08-24-2014, 10:29 PM
Steve are the lug covers still available? Like the acorns or the spiked one's?
ihbuilder
08-25-2014, 12:40 AM
Nick , I only have spikes right now . blunts in a few weeks some how :o
JBran
02-26-2015, 07:47 PM
Hi Steve,
I am looking for super single, wide type rims for a rear axle, for a 4x4 scania I am going to build. The rear axle will only be running one rim each side with a wide tire on it, looking at some like a 10 hole aluminium type rim like you have pictured. Do you offer something like this?
Cheers, Joshua
ihbuilder
02-26-2015, 08:43 PM
look at the last pic posted in this thread of a tub dump . that's what they will look like from the rear . Side will look just like a regular rear wheel .
mavrick0
02-26-2015, 09:20 PM
What about set of scale super singles drive wheels? I know no one actually makes the tire but isn't too hard to cut 2 tires to make one. The hard part would be the wheel itself.
easytruckin
03-22-2016, 03:56 PM
Hi Steve,
Do you have any news about the availability of those wheels ? I've sent you PM and contact form about this.
Thanks a lot !
Nicolas
ihbuilder
03-22-2016, 05:42 PM
Hi Steve,
Do you have any news about the availability of those wheels ? I've sent you PM and contact form about this.
Thanks a lot !
Nicolas
Sorry Nick, I ran out of front hubs . I finally got the machine free today to run more . :o:o:o:o:o
easytruckin
03-23-2016, 01:13 PM
Yeah great news !
Look forward to ordering my brand new wheels !
Cheers
Nick
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.