View Full Version : D11 project Hydraulic help required
titandigs
04-05-2011, 08:42 AM
Hi Guys, I have started to make a 1/14.5/1/15 scale D11 but has anyone got any info for the hydraulics other than the ones used in the Wedico models? as I think they will be to small.
Thanks Paul.
td9clyde
04-05-2011, 11:37 AM
DirtPusher9 Joe used the same in his D9R Dozer build and they work just fine i don't know if they were weidico or limbach/stahl but any how they were for the 1/14 scale and his dozer is 1/10 scale
RCLogger
04-05-2011, 04:37 PM
Hey Paul
There are about three types out there
Liembach > 10 bar
Robbe http://rctruckandconstruction.com/showthread.php?t=1605 > 13 bar
and a 30 bar used on bigger models http://www.fumotec.de/index.html
greg
titandigs
04-08-2011, 05:59 AM
Thanks for the info guys, I didn't know if the limebach would be strong enough as I have them on the three Wedico models. The exavator will dig to a point and then stall, so I thought maybe a bigger system would be better.
Paul
td9clyde
04-08-2011, 09:13 AM
you can always turn up the pump
If you couldn´t find any suitable cylinders there´s always a possibility to make them, I couldn´t find matching so had to do by my self.
Dan
You can try EC-M (http://www.ec-m.ch/hydraulik.html)
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.