View Full Version : AGCO-Hesston windrower
Grainfarmer
07-17-2011, 10:25 AM
Hi together!
Hereby I want to present my actual project:
The scale should be about 1/16 (as far as I could take dimensions from the pics in the brochure on the AGCO website...)
//http://www.bilder-hochladen.net/files/cc0h-ei-389b.jpg
http://www.bilder-hochladen.net/files/cc0h-ej-e223.jpg
http://www.bilder-hochladen.net/files/cc0h-ek-0874.jpg
I´ll take two geared morors for the transmission...
doodlebug
07-17-2011, 05:54 PM
Nice start on your windrower. Keep us posted.
Later, Neil#2 aka doodlebug.
Lil Giants
07-17-2011, 06:48 PM
Fabulous brass working skills, great start, look forward to seeing more. :)
rc_farmer
07-17-2011, 11:00 PM
U have my attention, keep the pics coming!
Grainfarmer
07-19-2011, 01:24 AM
...the panels for the frontwheels are mounted...
http://www.bilder-hochladen.net/files/big/cc0h-ep-2b8a.jpg
...the hood is made of polysyrene...
http://www.bilder-hochladen.net/files/big/cc0h-eq-f3f2.jpg
Today I´ll start with the cab and the drawings for the laser-cut blades for the razor bar...Finally I want to work with ist like a big one.
Grainfarmer
07-21-2011, 02:43 PM
Some advance on the cab and parts for the lifting system of the razor bar...
http://www.bilder-hochladen.net/files/big/cc0h-eu-cf67.jpg
mazdaparts
07-22-2011, 01:05 AM
Looking great so far. Can't wait to see it finished.
Espeefan
07-22-2011, 01:17 PM
Very neat! I'm also looking forward to seeing the progress. Discbine, or haybine head? I think a discbine head would be a lot easier to build! It could probably be functional too.
Grainfarmer
07-22-2011, 03:38 PM
Today I connected the frame of the mower to the chassis and I started with some parts for the cab:
http://www.bilder-hochladen.net/files/big/cc0h-ew-53fd.jpg
http://www.bilder-hochladen.net/files/big/cc0h-ex-2bb2.jpg
The drive motors for the front wheels and the mower discs are already ordered. For the discs I´ll take 2 brushless motors (12 Volts, 31000rpm) with a belt transmission to the discs (ratio 3:1).
The next parts to be ordered will be the tothed belts and pulleys for the discs.
mazdaparts
07-22-2011, 04:33 PM
The TLT used a toothed belt for the transmission if I recall correctly. Pulleys might be harder to find unless you have a different source
Grainfarmer
07-24-2011, 03:52 AM
I´ll take them from this supplier:
http://www.maedler.de/
...gears, joint shafts, pulleys, belts...they got a big choice of standard parts...
Grainfarmer
07-26-2011, 04:52 AM
...again some progress...
The laser cut discs are prepared...:
http://www.bilder-hochladen.net/files/big/cc0h-ey-ba2f.jpg
...And a platform to reach the engine compartment with extendible stairs:
http://www.bilder-hochladen.net/files/big/cc0h-f1-8542.jpg
http://www.bilder-hochladen.net/files/big/cc0h-f2-13f3.jpg
Frank good work - keep it coming along.
ChrisHz
mazdaparts
07-27-2011, 12:03 AM
Nice work on the platform and ladder. Not to mention the entire machine.
Grainfarmer
07-27-2011, 03:41 PM
Just a few small seps, but they go forward:
Windshield and right side window are fixed, handrails are new...:
http://www.bilder-hochladen.net/files/big/cc0h-f4-37f0.jpg
YoungGunz
07-28-2011, 12:40 AM
Very cool... nice work
Espeefan
07-29-2011, 01:55 AM
Great progress! Keep going. I am enjoying this build a lot. Everything is looking really good right now. The handrails are perfect. Can't wait to see this model completed. It's going to be sharp!
mazdaparts
07-29-2011, 11:25 PM
Hey the 60's called and they want the drivers clothes back. LOL Just kidding its looking great, and I can't wait to see it finished.
Grainfarmer
07-30-2011, 03:23 AM
...maybe the driver should get grey hair...? :rolleyes:
Quad-Dog
07-30-2011, 05:55 AM
Nice one Frank!
Grainfarmer
07-31-2011, 04:55 PM
Lil´ update: all motors ar fixed. I Hope I can filler the hood tomorrow...
http://www.bilder-hochladen.net/files/big/cc0h-f8-df87.jpg
http://www.bilder-hochladen.net/files/big/cc0h-f9-c399.jpg
http://www.bilder-hochladen.net/files/big/cc0h-fa-33e8.jpg
The drivemotors for the razor discs make 30.000rpm at 12Volts....with a ratio of 3:1 in the pulleydrive I think about balancing the discs...
I´m not sure if it´s necessary, but I guess it will minimize vibrations...
Tamiya Cowboy
08-05-2011, 04:18 PM
Holy Shhhhh WOW!! Love it great build.
rc_farmer
08-06-2011, 02:13 AM
Keep it coming, I'm loving this build!
Grainfarmer
08-24-2011, 03:01 PM
Some small steps forward:
The belts and pulleys arrived today and the paited chassis was assembled:
http://www.bilder-hochladen.net/files/big/cc0h-ft-5e38.jpg
http://www.bilder-hochladen.net/files/big/cc0h-fu-15de.jpg
Espeefan
08-28-2011, 11:53 AM
Very nice. Are you going to shave the little pins off the tires, or just get some better ones?
Grainfarmer
08-31-2011, 02:41 PM
I´ll cut them off. Maybe I put some other tires on, but I haven´t been looking for some yet.
FabOne
09-06-2011, 08:59 PM
AWESOME build!! Keep posting with your progress.
-Terry
Grainfarmer
11-14-2011, 03:22 PM
After several weeks of a low motivation break I made som progress today:
New rims, tires and headlights:
http://www.bilder-hochladen.net/files/big/cc0h-hd-996a.jpg
http://www.bilder-hochladen.net/files/big/cc0h-he-d7a7.jpg
http://www.bilder-hochladen.net/files/big/cc0h-hg-8ebd.jpg
The next part I´ll have to make is the belt tensioner...
rc_farmer
12-26-2011, 12:46 PM
Any new progress Frank?
Espeefan
12-26-2011, 04:14 PM
Wow. I really like those headlights! Mind if I ask where you found them? The cab looks really good now, with all those lights mounted. I like the new tires too.
Grainfarmer
12-27-2011, 12:00 PM
Some progress......yes.
Got the parts from my buddy who made the paintjob. Now I´m assembling the parts. Cab and rims still have to be painted. Pictures will follow soon.
Here you can find the headlights (No. 9):
http://www.formenbau-traenkl.de/Produkte/Shop/Beleuchtung.php
and the tires (set 3 Bruder/Siku):
http://www.formenbau-traenkl.de/Produkte/Shop/Felgen-Reifen.php
regards
Frank
Grainfarmer
01-03-2012, 11:34 AM
Hi together!
Paintjob is nearly finished, some small parts and the roof of the cab still have do be done. The decals were also made by my buddy from the painshop...
http://www.bilder-hochladen.net/files/big/cc0h-i6-c5ab.jpg
http://www.bilder-hochladen.net/files/big/cc0h-i7-a532.jpg
http://www.bilder-hochladen.net/files/big/cc0h-i8-4c27.jpg
http://www.bilder-hochladen.net/files/big/cc0h-i9-0f96.jpg
regards
Frank
ihbuilder
01-03-2012, 12:03 PM
you did an outstanding job , Frank :eek: Looks like it'll be ready for mowing
Grainfarmer
01-03-2012, 03:31 PM
Not under these weather conditions... :(
Next springtime I will make a test run I think.
But before I will have to take some pictures outdoors for a report for a german model magazine...
I ´show them when they´re ready.
Grainfarmer
01-15-2012, 12:26 PM
Nearly finished...:
http://www.bilder-hochladen.net/files/big/cc0h-ic-2915.jpg
http://www.bilder-hochladen.net/files/big/cc0h-id-9b69.jpg
regards
Frank
crawler07
01-15-2012, 07:47 PM
thats an awesome tractor you have their Sir!I bet you cant wait for the weather to clear so you can get it outside and work it..
Tamiya Cowboy
01-15-2012, 10:44 PM
Frank you did a great job on this.. These diecast mowers are tuff to find in the USA..
Grainfarmer
01-17-2012, 03:54 PM
Here are some pictures taken outdoor...:
http://www.bilder-hochladen.net/files/big/cc0h-ih-303e.jpg
http://www.bilder-hochladen.net/files/big/cc0h-ii-443c.jpg
Now I´ll have to wait for springtime....for first test runs. :rolleyes:
JensR
02-01-2012, 09:15 AM
So cool!
I really ought to spend more time in the "Farm Tractors and Implements" section!!
Dieselchopper
10-24-2012, 11:04 AM
Really good work. I have used these in real life.
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.