PDA

View Full Version : wedico e-cup


rcjo
07-19-2011, 10:36 AM
Hi guys Ive dont an oil & fillter change on my 966G but my problem is I have made a little tool to help me I am having a problem with lifting & decending the arms I can get them to go up nicely but they wont come down or I can get them to come down nicley but then they dont go up Ive tried to ajust them very very slowly get them moving in both directions but I cant get it to happen Please does any one know where I'm going wrong Thank you for any help.

Regards Jo (Wales )

Grainfarmer
07-19-2011, 12:00 PM
Maybe a closed tube in the return flow from the zylinder?

gun
07-21-2011, 09:58 PM
could be air locked as well or not enough oil in the system ? first i would trace all the lines and make sure you dont have a crimp in the tubing .

rcjo
07-22-2011, 05:48 AM
hi guys, thanks for your helps, well ive checked thru & sure enough crimped pipe, but I also changed the pipes around going into the valve blok & its made a great diffrence for the time being its runnig fine pleased to say, Thanks again guys for your helps. Regards Jo