Straywolf
08-29-2011, 11:01 PM
I figured i would challenge myself again and make some cb antennas for my girl and i think i didn't do too bad on them.
This is what i started with 2, 1/25 rear axles from and old kit i had.
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301176.jpg
These are the antennas i have on truck now
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301178.jpg
I then did the measuring with the other antenna and the pin in the end of cut my 2 metal axles to fit.
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301180.jpg
Once cut and fitted i wrapped telephone wire aound the axle with the coating on it first, but found it was easier without the insulation on it just use the bare wire.
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301182.jpg
After wrapping the wire i used 3/32" Tech-Tron Heat Shrink Tubing TT100 3/32" Blu to cover it and a lighter to shrink it and here are the results.
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301194.jpg
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301193.jpg
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301183.jpg
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301193.jpg
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301190.jpg
This is what i started with 2, 1/25 rear axles from and old kit i had.
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301176.jpg
These are the antennas i have on truck now
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301178.jpg
I then did the measuring with the other antenna and the pin in the end of cut my 2 metal axles to fit.
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301180.jpg
Once cut and fitted i wrapped telephone wire aound the axle with the coating on it first, but found it was easier without the insulation on it just use the bare wire.
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301182.jpg
After wrapping the wire i used 3/32" Tech-Tron Heat Shrink Tubing TT100 3/32" Blu to cover it and a lighter to shrink it and here are the results.
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301194.jpg
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301193.jpg
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301183.jpg
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301193.jpg
http://i110.photobucket.com/albums/n106/Straywolf_2006/cb%20antennas/S7301190.jpg