Spread Axle Race Trailer "The Rebuild"

[Tamiya Cowboy]

Hey guys here is my 53 foot spread axle race trailer I built out of a Bruder drop trailer and A LOT of Alum.. I am missing some of my picks of the build but here is what I have.

Now I am not totally sure any more but I think i stretched the top deck out 6 inches and the lower deck out 10 or 12 inches I can remember. All the plastic was filled back in and the frame beefed up with alum angle. The upper alum frame is all angle and then the angle braces are just flat alum strap. All the alum is bolted together and this trailer can handle way way more weight then i can get in it. I have new alum rims I need to get installed on it still.

http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1925.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1924.jpg

The sides are made out of .080 sheet plastic as is the tailgate. the roof is set up so it comes off so you can see inside.
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1928.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1933.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1930.jpg

The outside was done by the shop that does the body wraps on my work vans and he did a out standing job. the sides are all printed out then applied.
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1938.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1941.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1945.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1946.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/IMG_1942.jpg
Here is some video of the tail gate working.
http://www.youtube.com/watch?v=CdWpcbTajLQ

[tc1cat]

Great looking trailer!

[Izzy]

Paul - I never knew it was built on a bruder platform - would have never guessed either. Great Work on the decal btw....

[Stuff]

wow that turned out good! those little bruder wheels look even smaller on that stretched trailer.

[Tamiya Cowboy]

Great looking trailer!

Thanks Much Lynn

Paul - I never knew it was built on a bruder platform - would have never guessed either. Great Work on the decal btw....

LOL yeah once i change the wheels you would never know them little trailers are good for so many builds.

wow that turned out good! those little bruder wheels look even smaller on that stretched trailer.

Thanks Stuff.. The tries scale out real good to a nascar trailers tires I am going to try to get the tires and wheels on today? Just have to find the tires I have had them for 2 years....:D

[Snochaser]

You just don't quit do you, Your stuff always amazes me. Fine job once again. Ben

[FabOne]

An oldie, but a goody! I remember when you built that. A SUPER job.

By the way, we missed you and the boys (and the wife) at Indy last week. Alex (Dieselkid) told me that you were not coming and Alex himself had an abbreviated appearance himself.

-Terry

[Tamiya Cowboy]

Hey Thanks much Terry.. I have to admit I did not know who FabOne was till I was talking to Alex today on the phone it is good to hear from yeah.. Yeah missing Indy stunk but just cant do it all it is too close to my bigest trade show of the year and now they are only a week apart instead of 2 weeks like before so. Maybe you guys can make it out to St Lewy.

[Diesel Demond]

SHOW OFF!! Another thing i overlooked when you were telling me what it was. that kw is so bad

[Tamiya Cowboy]

SHOW OFF!! Another thing i overlooked when you were telling me what it was. that kw is so bad

LOL you are like a kid in a candy factory when you come over. Next time you come over you need to slow down and focus man focus!:D.

[Amador Ed]

Great Looking Trailer Paul, Guess i need to get my butt in gear and finish the trailer i am attempting to build...........................
Need to dig up the pics and repost here i guess................


Edward

[Tamiya Cowboy]

Edward Thanks much they are great little trailers to build off of.

[Tamiya Cowboy]

OK so I sold it and got lucky enough to buy to back "Thanks Keith" so I wanted to do to it what I planed on doing to it the first time and that is a pulling team trailer so I got started on it. I was raised on Case tractors so the 2590 was one of my favorite tractors on the farm so I found a team that was all case tractors and went from there. I had my decal guy get some red in the strips on the trailer to match the Reiks semi I built so here is where I am at.

http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/026-6.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/027-8.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/028-6.jpg

http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/017-7.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/019-13.jpg

Also been working on the inside got the lounge wall and door in with the diamond plate floor and lighting still have to get the bench and snap-on tool boxs in this weekend as well as a 4 wheeler and then on to the all the chicken lights..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/022-16.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/023-11.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/024-11.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/025-7.jpg

[MACK Daddy]

You got lucky..Not often can someone get back what they sold and make it look even better the second time around


Nice Job

Alfy

[AZLIGHTNING]

just wild love it TC. Wow you have built many that are on my favorits list but this one
just blows me away, just a great built.

[Kaf343]

Paul that trailer is amazing, and the tractor...to cool. Liking the LED inside as well. Nice job, back home where it should be.

[BRICKNICK]

Looks awesome Paul, I'm glad you got that one back in your stable.

[Tamiya Cowboy]

You got lucky..Not often can someone get back what they sold and make it look even better the second time around


Nice Job

Alfy

Thanks much Alfy you are to right..

just wild love it TC. Wow you have built many that are on my favorites list but this one
just blows me away, just a great built.

Thanks much AZ glad you like it when I did the frame work it was a lot of fun that is why there are a lacking amount of build picks it was some much fun to build that I got cought up in it and forgot to take some..

Paul that trailer is amazing, and the tractor...to cool. Liking the LED inside as well. Nice job, back home where it should be.

Thanks much Keith and Thanks for hooking me back up with it..

Looks awesome Paul, I'm glad you got that one back in your stable.

Thanks much Nick..

[Claus]

Paul I'm surprised the rear wheels are so wall to wall, I know they are 30.5-32 but it is still 1/16 scale, if it were a 1/14 puller tractor it wouldn't even fit.

Great job, nice to see a tractor that is not green, I like Deere but they are not the only tractor.

[Espeefan]

I like the pulling tractor theme, Paul. A much better twist for someone into these RC trucks and equipment. I was going to comment that your model pulling tractor fits about as tight in your trailer, as they do in 1:1 scale! I've seen them with not much more then a few inches per side, from the tires to the trailer walls.

[Tamiya Cowboy]

Paul I'm surprised the rear wheels are so wall to wall, I know they are 30.5-32 but it is still 1/16 scale, if it were a 1/14 puller tractor it wouldn't even fit.

Great job, nice to see a tractor that is not green, I like Deere but they are not the only tractor.

Claus thanks much I know I like deere too but I like Case better :D But now on the trailer Bruder is 1/16 so really the inside of the trailer is 1/16 but the out side is 1/14 in width as I added my sides on the out side of the old trailer.. That is why it looks right like it should.;)

[low&slow]

Love it! Can't wait to see the tool boxes, my dad sold snap-on for 22 years in Iowa when I was growing up. Plus you sold me on the plate :)

Awesome work.

-Josh

[Tamiya Cowboy]

Thanks much Josh I am hopping to get time on it over the long weekend..

[Tamiya Cowboy]

that is awesome TC, im a big fan of tractor pulling, and now this truck/trailer and tractor combo, great clean work mate!

Thanks much Sharkey.. Tractor and truck diesel pulling is one of my fav things to go do cant beat a cranked out tractor truck or semi ripping down the track.

[Tamiya Cowboy]

Yeah I got a NTPA pulling game on my cell phone..LOL..