remote tipper operation

[trucklover]

Hello guys. New to the site. I just received a tipper that has its own battery and a toggle switch that operates the up/down function. The ends of the wires from the motor and the switch have jst ends. The pack on the left controls the motor, the pack on the right controls the switch. How can I operate my tipper from my radio using these batteries? I bought an esc but I don't think it is correct. Any thoughts? I loaded some photos. I surely am glad I joined this group.

[fuzzy]

trucklover go to search and type in carson dump trailer it will help you

[Michael S]

Just put the esc in were the contact is now between the battery and the motor.

[Brel]

I fitted an Esc to my Carson tipper and used the fifth wheel/horn function on the MFC-01 to tip the trailer, I also removed the red wire from the Esc's servo plug to stop any cross interference to the MFC-01

http://i231.photobucket.com/albums/ee277/brelewart/Mercedes%20Benz%201838LS/GEDC0007-1.jpg

http://i231.photobucket.com/albums/ee277/brelewart/Mercedes%20Benz%201838LS/GEDC0006-1.jpg