Cat 621 info

[crusher]

Hi, I am new to forum, have done some scale ic engine builds, I would like to build from scratch a Cat 621 scraper in 1:14 scale. I have searched the web for pictures and drawings, found a few but what I need is a picture or drawing of the complete frame (tractor and bowl). Any ideas?
Thanks
Terry

[doodlebug]

Hey Terry,
Welcome aboard! Do a search on ebay, and look for literature and part's manual's
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=caterpillar+621+scraper&_sacat=See-All-Categories
Hope this help's! Cheer's, Neil.

[ihbuilder]

Get yourself a parts manual , thats a big help . Also search the net for 621specs. . I think Richie Brothers has a equipment spec. site . the cats should be easy to get that info on . Have fun and welcome to the scraper building club . can't wait to see it started :D .

[9W Monighan]

Look on ebay and buy an old NZG Cat 621 scraper. You should be able to get the lines you'll need but not all the internal details. I know a dual Sabertooth will simplify the steering.

http://www.ebay.com/sch/i.html?_nkw=caterpillar+621&_sacat=0&_sop=10&_odkw=caterpillar&_osacat=0&_trksid=p3286.c0.m270.l1313


http://www.ebay.com/sch/i.html?_nkw=caterpillar+621&_sacat=220&_sop=10&_odkw=caterpillar+621&_osacat=0&_trksid=p3286.c0.m270.l1313

[scraperad]

This may help. It is for the elevateor version J621 but the tractor unit is the same as the open bowl 621. Hope the dimensions help


http://i883.photobucket.com/albums/ac38/scraperad/j621scaledSmall.jpg

[crusher]

Thanks for the suggestions and the drawing, I have ordered a parts manual on ebay, will give that a try.
Terry

[Trackerman]

Try this link, which has a lot of old spec sheets, although I couldn't see one for the 621.

http://murphyused.com/specs.php

Cheers

trackerman

[crusher]

Thanks trackerman, there is a wealth of info there.
Terry

[Trackerman]

Terry,
you are welcome.

Paul

[steamer]

Hi Terry. Welcome to the forum. This link will take you to the Cat website for the 621. To bad this one doesn't have a decent drawing as we usually just scan it and have it enlarged to the size you need. Might find you 1/2 or 3/4 square at home depot or Metal supermarket. Hope this helps. Rob
http://xml.catmms.com/servlet/ImageServlet?imageId=C198833

[crusher]

Thanks steamer, I did download and print this one, what I need is a bare frame picture to scale, not much construction going on around here or I would go hunting with my camera.
Terry