View Full Version : long length micro end mill
ihbuilder
03-28-2012, 03:21 PM
Ahh , I need to find a .045 dia x .200 long carbide 2 flute end mill . WHERE ?
wrhby85
03-28-2012, 03:52 PM
this is as close as i can find...
click here (http://www.harveytool.com/prod/Products/Diamond/Amorphous-Diamond-Miniature-End-Mills_85/Long-Reach--Long-Flute---Carbide-Miniature-Ball-End-Mills_41.aspx)
hope it helps...Bill
ihbuilder
03-28-2012, 04:10 PM
this is as close as i can find...
click here (http://www.harveytool.com/prod/Products/Diamond/Amorphous-Diamond-Miniature-End-Mills_85/Long-Reach--Long-Flute---Carbide-Miniature-Ball-End-Mills_41.aspx)
hope it helps...Bill
thanks Bill ;) they aint cheep , but they'll get the job done . I was gettin worried about this 1 set of wheels :eek::eek:
sparkycuda
03-29-2012, 04:37 AM
I have used NBS. The long-reach endmills are special order but I've found their pricing and service to be very good.
http://nbs-miniature-endmills.com/product_info.php?cPath=9&products_id=18
Ken
trilliwilli
04-01-2012, 09:19 AM
Fraisa, one of the best mills in the world.
They have what you want and more.
http://www.fraisausa.com/product.php?id_product=1118
Shaft 20D ( means 20 times the diameter ) for diameter 1.2mm, which comes closest to the 0,045" you want.
But 15D probably is the best for you:
http://www.fraisausa.com/product.php?id_product=1112
Try using Toolexpert from Fraisa, it is the most comprehensive material database and for all the mills and materials it gives the cutting speeds, which are directly usable, i never broke one mill and use them on a daily basis for my work.
http://www.fraisa.com/CH/EN/NAV/NEWS/ToolExpert-Version-1-7.aspx
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.