View Full Version : K100 day Cab Cracker Box
Tamiya Cowboy
09-26-2010, 11:07 PM
Ok so since Jon and Travis cant keep there yaps zipped I guess it is time to come clean and post some picks of a little day cab COE show rig I am putting together. Jon showed me the picks of this little truck the other day and ever since Rouge built his awesome little single axle day cab pete and Travis little day cab knight hauler I have wanted to build a signal axle day cab truck.
http://i883.photobucket.com/albums/ac33/Stylinpete/02018.jpg
So here is a pick of the bits and bobs..Going to run a R2 tranny with a 65 turn and a 6 tooth onion/ 645 steering servo/ Verkrik low pro tires/ 11 3/4 frame rails/ Glob cab cut way down and other pieces and parts.
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/001.jpg
Ok here is the built frame with the running geared lowered way down I had to notch the frame in the rear for the axle to travel..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/002-1.jpg
Frame with stock body to the left of the blue tape is where the body gets cut.
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/003-1.jpg
Ok time to move the wheel well I think..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/004-1.jpg
And I think this looks right..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/006-1.jpg
Ok that is it for tonight!! More to come. :D
Stylin n profilin
09-27-2010, 10:10 AM
Now That looks awesome....This will be cool....I didnt say nothing...just that it was cute....Then Travis comes and runs us over with the bus im building:rolleyes:
rc_farmer
09-27-2010, 10:59 AM
That too cool Paul!
tc1cat
09-27-2010, 11:31 AM
I like the looks of this already. Not sure if you need to go with that motor and gear combo. My Stude has a 55 turn motor with about a 13 tooth pinion and it is plenty slow with the R2 in it.
justinart24
09-27-2010, 01:31 PM
I am digging the short cab. Nice job!
Snochaser
09-27-2010, 03:12 PM
That didn't take long for you to jump on that build huh? Looking good.
Tamiya Cowboy
09-27-2010, 04:32 PM
Now That looks awesome....This will be cool....I didnt say nothing...just that it was cute....Then Travis comes and runs us over with the bus im building:rolleyes:
Thanks Jonny Boy..Watch out :eek:
That too cool Paul!
Thanks Much Robbert! ;)
I like the looks of this already. Not sure if you need to go with that motor and gear combo. My Stude has a 55 turn motor with about a 13 tooth pinion and it is plenty slow with the R2 in it.
[/B]Thanks Lynn on the motor combo this is what i run in crawlers I like the slow speed but with 11.1 Lipo you have lots of top end too.[/B]
I am digging the short cab. Nice job!
Thanks Much
That didn't take long for you to jump on that build huh? Looking good.
LOL for you newer guys that dont know me I have builders A.D.D I have4 to have many projects going at the same time..:D
Snochaser
09-27-2010, 05:27 PM
....and the keyword on the last comment is TIME. It seems like a month or two ago you were building the "State/County truck" with plow and sander. I'm sure that was probably 20 trucks ago though.
-Ben
kenworth
09-27-2010, 06:05 PM
Talk about being creative in fitting all of the stuff to run that in the cab or anywhere else for that matter.
fhhhstix
09-27-2010, 07:24 PM
Hay I didn't mention any names I just sujested that some body should build it.:D
Travis "00" Biddle
Tamiya Cowboy
09-27-2010, 09:27 PM
....and the keyword on the last comment is TIME. It seems like a month or two ago you were building the "State/County truck" with plow and sander. I'm sure that was probably 20 trucks ago though.
-Ben
Ben that was Freddy that built the plow truck..That boy is in a class by him self..
Talk about being creative in fitting all of the stuff to run that in the cab or anywhere else for that matter.
LOL yeah it is going to be snug just getting a esc in it but my esc is the size of a .25 cent piece and I will be running Lipo so the battery will be small.
Hay I didn't mention any names I just sujested that some body should build it.:D
Travis "00" Biddle
LOL.. Nice work Doubble O Biddle..:D
Snochaser
09-27-2010, 09:41 PM
That's right. You, Travis and Freddy are suffering from the same truck building OCC. Love the competition!!!
-Ben
Thorsteenster
09-28-2010, 08:34 AM
Now that's sweet, dig the short cab and WB. Can't help but think though that it would make one cool drag truck.
Stylin n profilin
09-28-2010, 09:40 AM
I dont know how much of a drag truck it is..This is what i seen though..:eek::D
http://i883.photobucket.com/albums/ac33/Stylinpete/60798_547983535162_72105290_31775170_7867408_n.jpg
Tamiya Cowboy
09-28-2010, 09:55 AM
Now that's sweet, dig the short cab and WB. Can't help but think though that it would make one cool drag truck.
Thanks Thor I am liking it..
I dont know how much of a drag truck it is..This is what i seen though..:eek::D
http://i883.photobucket.com/albums/ac33/Stylinpete/60798_547983535162_72105290_31775170_7867408_n.jpg
Now that is what I am talking about NICE pick Jon!!
Espeefan
09-28-2010, 12:01 PM
Looks like the Mack is loosing already. :D Is it me, or you running some sort of low profile tire on the rims?
Tamiya Cowboy
09-28-2010, 12:11 PM
Yeah it is on the back burner for a bit.. And yes I am running them low pros on the hole truck
Diesel Demond
09-29-2010, 09:33 PM
amazement after amazement! get off your wallet and finish it i could die tomorrow!!
Tamiya Cowboy
09-30-2010, 09:50 PM
LOL is the air thin up there in Minnesota or what..Cory you are funny as all get out.
nenard
10-01-2010, 04:53 AM
Short and to the point. Sweeet!
SmallHaul
10-01-2010, 08:23 AM
Cool little Rig!
roadranger
10-03-2010, 05:32 PM
Nice truck, Paul!
Like the set forward axle and re-adjusted wheel well - that's what REAL cabovers look like!
Now you just need a set of double pup boxes to tote behind it...
Tamiya Cowboy
10-03-2010, 06:08 PM
Hey thanks much Jim..
I am going to go with one or 2 short flat beds that will be lowered but.... 2 sea boxes to go on them would be sweet..
Hey when we going to see you put that truck together.. I seen a real Knight Hauler today with the same paint job..
cummingsman29
10-03-2010, 07:20 PM
I 2nd that nenard!! Sweet
Rogue
10-08-2010, 06:33 PM
I know, i know... I'm dragging up threads from Page 2:rolleyes:, but this little truck does it for me.
Awesome theme for a truck Paul. I love it !!
jffhrvstr
10-08-2010, 06:59 PM
That is a cool build, looking good can't wait to see more pics of it!
roadranger
10-09-2010, 10:57 AM
Hey thanks much Jim..
I am going to go with one or 2 short flat beds that will be lowered but.... 2 sea boxes to go on them would be sweet..
Hey when we going to see you put that truck together.. I seen a real Knight Hauler today with the same paint job..
slowly working on the "Fruitliner" :D
Bruder makes some short overseas containers...
Tamiya Cowboy
10-09-2010, 11:29 PM
I 2nd that nenard!! Sweet
Thanks Much Donny!
I know, i know... I'm dragging up threads from Page 2:rolleyes:, but this little truck does it for me.
Awesome theme for a truck Paul. I love it !!
LOL! Digging Up Bones :D Well thanks for doing that Rick so i would get going on it and I did..Glad you like the build cause your truck is the reason I have wanted to do one for a long time..
That is a cool build, looking good can't wait to see more pics of it!
Thanks For the great comment..;)
slowly working on the "Fruitliner" :D
Bruder makes some short overseas containers...
I am looking for the bruder ones see if I can find 2 of them.. Oh and get crack'n on the Fruitliner cant wait to see it rolling..
Ok Boys here we go I got some more done tonight. I made a little bracket to mount the servo too sideways in the nose of the frame.
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/001-3.jpg
Next I got the R2 mount made and installed in the chassis..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/004-5.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/005-5.jpg
And i made a deck plate for the back and got the short wedico fuel tank mounted to the frame also..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/005-5.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/003-5.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/006-4.jpg
Ok pretty much just finishing the cab body work and some details and this one goes to paint and finished..
Rogue
10-09-2010, 11:40 PM
I'm seeing a lot of similarities to how i did mine. You been peekin' at my PB account again Paul?? LMAO
The C-notched frame is awesome.:D What are those tank mounts? Stock Tammys with the ears cut off?
Hurry up and get this little dude in color. I'm gettin' all tingly here waiting to see this done.
P.S. I call dibs on this one if and when it goes on the block
Tamiya Cowboy
10-09-2010, 11:49 PM
I'm seeing a lot of similarities to how i did mine. You been peekin' at my PB account again Paul?? LMAO
The C-notched frame is awesome.:D What are those tank mounts? Stock Tammys with the ears cut off?
Hurry up and get this little dude in color. I'm gettin' all tingly here waiting to see this done.
P.S. I call dibs on this one if and when it goes on the block
LOL! :D Thanks Much Rick..And yes I have looked at the tread over and over and over dreaming on what to build..:) Yeah the mounts are stock tamiya with the top ear lobed off but the bottom one is still there. Calm down there fella going as fast as I can..
FreddyGearDrive
10-10-2010, 08:30 AM
Yea,that's gunna be a cute little shaver. I agree,can't wait to see er in some color. Lookin good there son!:D
FGD
Ace Trucker
10-10-2010, 10:23 AM
looking nice like it
Rogue
10-17-2010, 10:59 PM
ALRIGHT !! Gettin' dangerously close to Pg 2 again.
What's going on with this lil guy?
Inquiring minds want to know:D
Tamiya Cowboy
10-18-2010, 07:57 AM
Yea,that's gunna be a cute little shaver. I agree,can't wait to see er in some color. Lookin good there son!:D
FGD
Thanks Much Freddy
looking nice like it
Thanks Ace
ALRIGHT !! Gettin' dangerously close to Pg 2 again.
What's going on with this lil guy?
Inquiring minds want to know:D
LOL! :D As you can see I got side tracked with the GL this weekend and that 1850L.. But Ill be back at it this week getting the floor and body work dont then off to paint so stay tuned Ill be back at it..Thanks for keep me on task Rick :cool:
bucshott
10-20-2010, 12:02 AM
Great start TC Dont stop to fast, you`ll be on your nose. HEHE any up dates?
Tamiya Cowboy
11-19-2010, 05:43 PM
Great start TC Dont stop to fast, you`ll be on your nose. HEHE any up dates?
Thanks Much Bucshott I have gotten a little more body work done I have alot of customer work right now so my stuff is on hold but I did get a new friend for it to play with..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/001-5.jpg
fhhhstix
11-19-2010, 08:09 PM
Man Paul you sure are into the short trucks here lately.:D What next you gonna build the short bus.:p:D
Travis
Tamiya Cowboy
11-22-2010, 09:41 PM
LOL yeah Travis sort of in a rut it is nice to do something different. I am going to leave the Bus to the head driver himself.
ihbuilder
11-22-2010, 09:44 PM
Man Paul you sure are into the short trucks here lately.:D What next you gonna build the short bus.:p:D
Travis
HAY that's my IDEA :p:p:p:p
looks good Paul
bucshott
11-22-2010, 09:48 PM
awww. the little truck has a little friend.
Tamiya Cowboy
11-22-2010, 09:58 PM
HAY that's my IDEA :p:p:p:p
looks good Paul
LOL Thanks Steve
awww. the little truck has a little friend.
LOL :D Thanks Rick everybody should have a play friend.
Tamiya Cowboy
11-28-2010, 09:42 PM
Ok long over due update on the old cracker box. Between customer truck builds and work there just has not been time for my stuff but I am getting a caught up with work so I got some time this weekend to work on the cracker box.
Alright I got the head lights sunk in and the new headlight rings mounted there is a little more shaping to do around the rings and I have to cut in the side marker light. I also filled in the old grill hole and got the KW grill reset in the body..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/001-8.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/003-11.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/004-12.jpg
Also got the floor cut and mounted so i could set the cab.
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/002-11.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/006-10.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/005-10.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/007-7.jpg
So that is it for now.. Ill close the back of the cab in this week and cut the rear window in. I also have to make the AC unit for the roof to "Does anyone have a pick of what this unit looks like if so it would really help" Thanks Much. I have to get some alum for the front bumper so I can set it back some and make it look nice..
Ok thanks guys more to come.
Dreamweaver
11-28-2010, 09:50 PM
Awesome Paul, put a 36" bunk on her and that's what i learned how to drive in..
-Mike
Espeefan
11-28-2010, 10:08 PM
Paul, that is looking really good! That grill is perfect and the headlights are spot on, from what I can tell. This is going to be sharp as a tack. Really cool project!
Tamiya Cowboy
11-28-2010, 10:22 PM
Awesome Paul, put a 36" bunk on her and that's what i learned how to drive in..
-Mike
Paul, that is looking really good! That grill is perfect and the headlights are spot on, from what I can tell. This is going to be sharp as a tack. Really cool project!
Thanks Much for the great comments guys! I am hoping it comes out the way i am wanting it so so far so good. In the one pick it looks like the head light ring on the right is not level but I just looked at it and it is :confused: Just got a new dig cam and it does goofy things?? Sort of like Steve's IH bumper looking bent and it was not??
bucshott
11-29-2010, 10:25 PM
Comimg along nicly paul. Nice grill, you make it?
civicex5speed
12-01-2010, 01:42 PM
Comimg along nicly paul. Nice grill, you make it?
I was about to ask this. I guess you could call this a bump.
TC really helped me find this place, so it's nice to be here.
Thanks for the great build and thanks for telling me about RC Truck
Bigrigger
12-04-2010, 08:24 PM
Look's great TC!!!!:D I love the grille, it's spot on!!!:D
Tamiya Cowboy
12-05-2010, 08:47 PM
Comimg along nicly paul. Nice grill, you make it?
I was about to ask this. I guess you could call this a bump.
TC really helped me find this place, so it's nice to be here.
Thanks for the great build and thanks for telling me about RC Truck
Look's great TC!!!!:D I love the grille, it's spot
on!!!:D
Thanks Much guys.. I did not make the grill and Civic I like your little 352 Pete in you pick you going to build that..
real nice grill work! and those light buckets turned out nice .....
Stepside
01-09-2011, 05:28 PM
Any updates!?? I can't wait to see this one w/ some pipes on it:D
Tamiya Cowboy
01-09-2011, 05:53 PM
Any updates!?? I can't wait to see this one w/ some pipes on it:D
Sorry Rod all my builds have to go in the can for a few months I have too much to build for other people again so it wont be done for a bit I dont think plus I have parts for 5 trucks and have 2 started but not till other peoples stuff is done..
Allbusted
01-19-2011, 07:27 PM
Very cool little build cant wait to see more..
Tamiya Cowboy
07-25-2011, 07:54 PM
WOW! I had to do some major digging to find this thread but this may shock some but i started on it again this last weekend. I work up Sat night at 2am and could not get back to sleep so I got up and had the itch to build so I started in and things were clicking again..
I normally dont worry about the interior in the cab but i thought I would in this truck. I got the dash and seats in then got to work on the dog house.
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/007-23.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/008-25.jpg
Fits real nice too.
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/009-21.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/010-18.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/011-16.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/012-15.jpg
Next the AC unit in the roof of the cab..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/014-8.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/015-9.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/016-10.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/017-8.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/018-8.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/019-7.jpg
Then I did the lines to the AC unit with brass rod and I also built the cover over the end of the motor with the screen over it.
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/013-8.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/022-8.jpg
And well after the sun was up I finished with the mud guards and mounted the one stack I had as I am WAITING on JON to send me the other one.:D HINT..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/023-5.jpg
I should get some more time this week on it all of the electronics will be in the cab and I have some more detail to do on the inside and the outside of the cab before I finish the body work and send it off to paint..
Nice work on that dog house !!! Are you going to put a fifth wheel on that large car so you can pull your hay trailers ? That would be cool
Car5858
07-27-2011, 09:43 AM
I like this one a lot, can't wait for it to be completed.
Pippoe
07-27-2011, 12:23 PM
Very nice job on the truck. What about making it a three axle and adding a set of Michigan trailers to it?
like here.. (http://www.hankstruckpictures.com/pix//trucks/tim_gibson/sept2002/a_and_c1.jpg)
and here... (http://www.hankstruckpictures.com/pix//trucks/tim_gibson/sept2002/a_and_c4.jpg)
Cheers
Pip
Tamiya Cowboy
07-28-2011, 09:00 PM
Hey Guys thanks for all the great comments on the truck.. Ill get the body work finished this weekend so it can go out for paint..
DieselKid
07-28-2011, 09:30 PM
That thing looks killer Paul! And those low-pros were meant for a rig like this! Nice realistic plumbing work for the AC as well!:)
Can't wait to see the next update!
-Alex
Tamiya Cowboy
07-31-2011, 06:53 PM
That thing looks killer Paul! And those low-pros were meant for a rig like this! Nice realistic plumbing work for the AC as well!:)
Can't wait to see the next update!
-Alex
Thanks Much Alex! I did get more done today but just body work..:mad:
Papabaer
08-01-2011, 02:20 PM
I likie your "Cracker Box"
I love this short Chassic - why bare? :D:D:D
Tamiya Cowboy
08-01-2011, 07:41 PM
I likie your "Cracker Box"
I love this short Chassic - why bare? :D:D:D
Thanks much P-baer!!
Tamiya Cowboy
05-20-2012, 03:45 PM
Well Back at it again building.. I got the body back from Jon and he did a outstanding job on the paint I have started putting the body back together I still have to make a new front bumper as this one does not work well on it and it is for another Day Cab Pete I am starting soon. I have to make the Air Cleaner can this week and the Battery Box and the frame is ready for paint so more to come this week..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/026-1.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/030-1.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/028-2.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/029.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/027-1.jpg
ihbuilder
05-20-2012, 03:48 PM
thats sweet Paul . I was wondering where this was .
Stylin n profilin
05-20-2012, 03:52 PM
Just awesome...I love it...man..way to cool...I thought it was cool before..but now that its got the goodies on it!!!:cool::cool::cool:
BRICKNICK
05-20-2012, 04:06 PM
Wow Paul...that cracker box is bad ***, Jon killed it with the paint job. Nice job again Jon boy.
Tamiya Cowboy
05-20-2012, 04:18 PM
thats sweet Paul . I was wondering where this was .
Just awesome...I love it...man..way to cool...I thought it was cool before..but now that its got the goodies on it!!!:cool::cool::cool:
Wow Paul...that cracker box is bad ***, Jon killed it with the paint job. Nice job again Jon boy.
Thanks much guys.. ;) Nick old Jon boy is pretty handy with his Crayons..He did exactly what I wanted again..Thanks Jon..:D
plow jockey
05-20-2012, 04:27 PM
Way cool! Great paint work luv the A/C unit that puts it over the top.
fhhhstix
05-20-2012, 04:45 PM
I like the truck but not the paint:eek:, it looks like you couldn't decide on a color so you used all the colors you had. It's your truck and you like it so that is all that counts.:cool:
Travis
SWAGGER
05-20-2012, 05:05 PM
What a cool little truck. I quite like the paint scheme, it has a very classy vintage look to it. A/C unit and lines really add to it!!
hammer
05-20-2012, 05:51 PM
Paul,
That is one awsome looking cracker box that is BADA$$. That paint sceme is very cool the colors work very well together great job.
Tony
dabears
05-20-2012, 07:21 PM
Thats a cool looking truck! I like the old school looking paint. Great job on the truck!!
Diesel Demond
05-20-2012, 07:25 PM
paint is very cool lots of lines as well as talent for paint and graphics. truck looks even better with the goodies on it. any multi function gonna happen
MACK Daddy
05-20-2012, 11:07 PM
I had a chance to see this body in person and definitley gets the unique factor.. Looking good !
Nice Job !
Alfy
Cossett
05-20-2012, 11:34 PM
Now that is one cool single drive, like that colour cause after a hard night on the grog the aftermath will blend inwith the paint :D who made that sweat grilll???
Cheers Tracy
spudd
05-21-2012, 08:36 AM
nice truck... gona be a bumpy ride....
petermoblin
05-21-2012, 12:14 PM
Great job Paul. Got the "old school cool" look going for sure.
Pippoe
05-21-2012, 04:12 PM
Aaah! beautiful. Great job on the Kenny so far!
Cheers
Pip
Tamiya Cowboy
05-22-2012, 11:00 PM
Way cool! Great paint work luv the A/C unit that puts it over the top.
Thanks Plow Jockey..
I like the truck but not the paint:eek:, it looks like you couldn't decide on a color so you used all the colors you had. It's your truck and you like it so that is all that counts.:cool:
Travis
Gee Thanks I guess Travis :confused:
What a cool little truck. I quite like the paint scheme, it has a very classy vintage look to it. A/C unit and lines really add to it!!
Thanks Again Swag
Paul,
That is one awsome looking cracker box that is BADA$$. That paint sceme is very cool the colors work very well together great job.
Tony
Thanks Much Tony... Styln gets all the credit he did a killer job on it.
Thats a cool looking truck! I like the old school looking paint. Great job on the truck!!
Thanks Much
paint is very cool lots of lines as well as talent for paint and graphics. truck looks even better with the goodies on it. any multi function gonna happen
LOL Thanks Cory no MFU in this..
I had a chance to see this body in person and definitley gets the unique factor.. Looking good !
Nice Job !
Alfy
Thanks Alfy
Now that is one cool single drive, like that colour cause after a hard night on the grog the aftermath will blend inwith the paint :D who made that sweat grilll???
Cheers Tracy
Thanks Tracy the grill is a Toy grill
nice truck... gona be a bumpy ride....
LOL Thanks Spudd
Great job Paul. Got the "old school cool" look going for sure.
Thanks Much Jessy
Aaah! beautiful. Great job on the Kenny so far!
Cheers
Pip
Thanks Much Pip Ill get some build time in on Friday morning on it..
glorydays24
05-23-2012, 12:30 AM
It may be little, but boy it sure is short.:p:p WOW that is definitely old skool. The colors are perfect...it doesn't get any better than this. EXCELLENT JOB ON THE BODY AND PAINT!!!:D:D:D
Big John
cabrover
05-23-2012, 04:39 PM
Very nice Paul!! I love the old school look!!:cool:
Tim
Papabaer
05-23-2012, 05:02 PM
Hallo Paul,
looks fantastic so far. Could you plaese post some Detail Pictures from the Air conditioning system on the roof - ist´s a very nice Detail.
Well how about an up date on the little large car and what kinda trailer you going to drag? Some pup hopper bottoms would be cool or belly dumps!!!!!!
Tamiya Cowboy
05-23-2012, 10:54 PM
I got Izzy working on something special for it I also have a very short box trailer for it too..
Brian in PA
05-26-2012, 09:10 AM
Nice pant scheme Paul.
Diesel Demond
05-26-2012, 12:00 PM
hMMM? cant waite to see the special part and the trailer sounds great for it. 53' van spread axle with a refer would look silly! lol
sneaky-pete
05-26-2012, 01:07 PM
That looks killer Paul!:eek:
John did a great job on the paint.
I love the stance!
Tamiya Cowboy
07-02-2012, 06:37 PM
Nice pant scheme Paul.
hMMM? cant waite to see the special part and the trailer sounds great for it. 53' van spread axle with a refer would look silly! lol
That looks killer Paul!:eek:
John did a great job on the paint.
I love the stance!
Thanks Much for the great comments Guys!! Jon did a great job on the paint for sure..
I got most of the truck done still have to put the controlls in it and the lights and there are lots of little details but they sell the build that I have left to put on this weekend but here is how she sits as of now..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/002-1.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/003-1.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/005-1.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/004-2.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/008-3.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/006-3.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/007-1.jpg
Diesel Demond
07-02-2012, 07:01 PM
That is so cool and i like what u did with the 5th wheel makes it look like one of those no grease 5th wheels!
CrewCab59
07-02-2012, 07:22 PM
The paint looks sweet , short and not over done
Espeefan
07-03-2012, 11:10 AM
Nice job with this one, Paul. I like the paint! The grill is really nice too. Both are key to pulling off the KW look.
dabears
07-03-2012, 01:21 PM
Looks great! Love the 5th wheel as well
hippy
07-03-2012, 08:18 PM
that is one good looking stubby!
are you going to put mud flaps on?
Tamiya Cowboy
07-03-2012, 08:49 PM
That is so cool and i like what u did with the 5th wheel makes it look like one of those no grease 5th wheels!
Thanks Cory..
The paint looks sweet , short and not over done
Thanks Crew
Nice job with this one, Paul. I like the paint! The grill is really nice too. Both are key to pulling off the KW look.
Thanks Nate
Looks great! Love the 5th wheel as well
Thanks Dabears
that is one good looking stubby!
are you going to put mud flaps on?
Thanks Hippy.. I am going to put flaps on it there is alot of little detail left to do on it.. I am still thinking on what I want for a rear light panel and how I want the flaps..
Dairyland Trucker
07-03-2012, 10:12 PM
Paul this is simply beautiful and a great build, and John did an amazing job with the paint!!!!
Tamiya Cowboy
07-04-2012, 09:59 PM
Paul this is simply beautiful and a great build, and John did an amazing job with the paint!!!!
Thanks Much Dairyland..
Last night I took some alum tig rod and made a set of day cab grab bar with ladder..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/001.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/002-2.jpg
And I have had this in my head for a while now I wanted a pup trailer for my grain trailer and I made it so I could also pull it behind the cracker box with a change of tires..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/010-3.jpg
I built this trailer today in 5hrs start to finish.. main body is made out of 1/4 PVC sheet all glued with 143 Fuser glue then I made all the alum edges and rails and glued them on too very solid trailer all I got left to do is some detail and the dolly..
Thanks For Looking.
AZLIGHTNING
07-04-2012, 10:05 PM
What more can be said just beautiful paul! Great Craftsmanship.
MACK Daddy
07-04-2012, 10:56 PM
Nicely done all around Paul...Unique build from start to finish
Alfy
heavy_duty
07-04-2012, 11:09 PM
Great job TC.That green really pops on that truck.
Ed
dabears
07-04-2012, 11:36 PM
I wish i could build a trailer like that in 5 hours!!! Amazing and looks right at home behind the truck. Awesome work
Tamiya Cowboy
07-05-2012, 07:43 AM
What more can be said just beautiful Paul! Great Craftsmanship.
Thanks Much AZ
Nicely done all around Paul...Unique build from start to finish
Alfy
Thanks Alfy
Great job TC.That green really pops on that truck.
Ed
Thanks Ed
I wish i could build a trailer like that in 5 hours!!! Amazing and looks right at home behind the truck. Awesome work
Thanks Arron.. I am have been in the Rc hobby since I was 12 and I am 37 now and the last 13 years I have been into semis so some things are easier for me you would be surprised I bet you could build it pretty fast too 95% of the parts were cut on my table saw and miter box..
Tamiya Cowboy
07-09-2012, 09:11 PM
Little Short Video of the KW I have all the detail done now just have to finish up the lights.. I am running a R2 tranny with a 55 turn with 19 tooth little faster than a 55 turn on a 3 speed in first gear.. Also running a 2 cell lipo.
http://youtu.be/NL_W6dA2Z_g
MACK Daddy
07-09-2012, 09:15 PM
TEASE !!!!
Looks Good Paul..Gots Some Giddy Yup !
Alfy
dabears
07-09-2012, 09:24 PM
With a full trailer it'll just do wheelies lol
Tamiya Cowboy
07-09-2012, 09:38 PM
TEASE !!!!
Looks Good Paul..Gots Some Giddy Yup !
Alfy
Thanks Alfy
With a full trailer it'll just do wheelies lol
Nope it is empty..
ihbuilder
07-09-2012, 10:26 PM
:eek:holy crap it's just like my big mack when I 1st got it running :eek::cool::cool:
Tamiya Cowboy
07-11-2012, 10:05 PM
Yeah she has a little hair for sure Steve.
Here are the final picks with the details on it still need to come up with a light panel for the rear..
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/007-2.jpg
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/008-5.jpg
Hmmmm??
http://i58.photobucket.com/albums/g276/theonlytamiyacowboy/Truck%20Picks/009-3.jpg
Grainfarmer
07-12-2012, 03:27 AM
Wondeful! Great job!
regards
Frank
Dreamweaver
07-13-2012, 04:39 AM
That thing looks awesome Paul. Brings back some memories. Put a coffin sleeper on it and paint it two tone blue and that's the old mans truck that I learned how to drive.
Brian in PA
07-13-2012, 09:15 AM
Paul, I would put a couple round lights in the back. I'm not sure about a full light bar?
Tamiya Cowboy
07-13-2012, 09:36 AM
Thanks much Frank..
Mike that would be a cool looking truck to build.
Brian that is what I'm thinking little stainless plate with 2 lights and a set of white flaps with chrome hangers.
AZLIGHTNING
07-13-2012, 09:44 AM
Great Pics & Video Paul! She's just To Sweet, love the Paint scheme
Tamiya Cowboy
07-13-2012, 11:17 PM
Great Pics & Video Paul! She's just To Sweet, love the Paint scheme
Thanks Much man I really like the little squirt too its lots of fun to drive and pulls like a mule..!
egronvold
07-14-2012, 03:41 AM
Highly detailed, love the paint scheme. I bet it's a nice truck when backing up trailers :)
Diesel Demond
07-14-2012, 07:56 AM
a true yanker not a puller!!
rookie
04-15-2013, 12:02 AM
great job on the Cracker Box ! I'm new to the site and am very much a cab over fan! The Globe Liner is gonna be my fist project. I'll be trans forming it also into a K-100. So I'll probably be a pain in you know what for asking dumb questions and measurments and stuff. Keep up the great workmanship!
Rookie.
1985 kenworth
04-15-2013, 12:20 AM
as always paul you never fail to amaze me.i remember those as a tandem back in the 70's pulling texaco tankers around the city .they were the cracker box or slab cab as i heard them called also...good job,i would be a little claustophobic driving that for fear that if i hit a rock it would trip the truck on its nose:p
Well, I didn't necro bump it, but you picked a good one to revive :D
Tamiya Cowboy
04-15-2013, 06:23 PM
Highly detailed, love the paint scheme. I bet it's a nice truck when backing up trailers :)
Thanks much..
a true yanker not a puller!!
Thanks Cory..
great job on the Cracker Box ! I'm new to the site and am very much a cab over fan! The Globe Liner is gonna be my fist project. I'll be trans forming it also into a K-100. So I'll probably be a pain in you know what for asking dumb questions and measurements and stuff. Keep up the great workmanship!
Rookie.
Thanks Much Rookie.;)
as always Paul you never fail to amaze me.i remember those as a tandem back in the 70's pulling Texaco tankers around the city .they were the cracker box or slab cab as i heard them called also...good job,i would be a little claustrophobic driving that for fear that if i hit a rock it would trip the truck on its nose:p
Thanks you very much Dwayne.. I have driver a Pete cracker dump truck and the cabs are very small and tight.
Well, I didn't necro bump it, but you picked a good one to revive :D
Thanks 404.. Should never worry about digging up old threads mine or anyone else its good to bring them back to the top sometimes that is the only way new people will every find them. And new members should never worry about what someone may say if you dig up a old thread there is nothing wrong with doing so.
bhaagjr
04-15-2013, 07:27 PM
Great job on the truck, I love the old school look. The colors look great.
Roundabout
04-16-2013, 03:43 AM
love this little truck, if you ever wanna sell it I've got a nice warm shelf for it ;)
powerstroke_1999
04-16-2013, 11:47 AM
That truck is sweet man its a stubby I like it good job!!
powerstroke_1999
04-16-2013, 11:50 AM
O where is the battery going to go in the glove box LOL !!
Tamiya Cowboy
04-16-2013, 07:16 PM
Great job on the truck, I love the old school look. The colors look great.
Thanks Much
love this little truck, if you ever wanna sell it I've got a nice warm shelf for it ;)
That truck is sweet man its a stubby I like it good job!!
O where is the battery going to go in the glove box LOL !!
Thanks PS if you look its on the passenger side..
Snochaser
04-16-2013, 07:29 PM
Awesome little truck and trailer Paul. I hope one day I get to see all your builds in person.
Ben
Stickman
04-16-2013, 09:52 PM
That is a cool little truck. The paint is awesome. Always loved paint styles of that era.
Tamiya Cowboy
04-18-2013, 08:19 PM
Awesome little truck and trailer Paul. I hope one day I get to see all your builds in person.
Ben
Thanks much Ben..
That is a cool little truck. The paint is awesome. Always loved paint styles of that era.
Thanks Much Stickman.
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.