PDA

View Full Version : Motor choice for a "Stock" Tamiya King Hauler...


justinart24
09-29-2010, 06:08 PM
Sorry in advance for the newbie question.

I have a King Hauler with a stock trans and I was wondering what is a good turn motor....45t?55t?65t?

I plan on hauling around my Hilux and Clod scalers in the future, there about 11lbs a piece.

Thanks in advance!http://warcrc.org/phpBB/images/smilies/thumbsup.gif

Brian in PA
09-29-2010, 07:28 PM
I have a 4/1 GRU with stock motors and both trucks preform fine. My king with flatbed will pull my 4 year old son around my driveway just fine, even up hill! the Daycab and dump will haul a full trailer of wet sand up hill. Good luck with whatever you choose.

Brian

DieselKid
09-29-2010, 08:15 PM
You may look into an LRP Puller Motor....

PMD/Garden Trucking sells them for a very decent price considering it's a German-made motor (second item down)...

http://www.gardentrucking.com/products.tpl?command=search&db=cma/parts.db&action=search&cart=&wording=%5Bwording%5D&eqCATEGORYdatarq=Tamiya&eqMAJORCATEGORYdatarq=products&Titlesumm=t&Titlesort=1&max=5&startAt=36

And LRP's even come out with a 2nd and 3rd variation to this motor as well, now including a brushless option....

http://www.lrp.cc/en/products/electric-motors/car/brushed/

They don't list the 'turns' of the motor online, on the box, etc.....but from what I've seen/heard these motors are 80T. But don't let that scare you into thinking the truck will creep along like a snail....with the stock pinion you'll be fine.

Hope this helps,
-Alex

justinart24
09-29-2010, 08:18 PM
Sweet, thanks a bunch guys!

CorbettTrailers
09-29-2010, 09:54 PM
I use a 55T Axial motor with a 8 Tooth pinion from scale. I have plenty of torque when pulling heavy trailers and with the 3 speed tranny I still have enough speed to build momentum to go up my backyard.

Tamiya Cowboy
09-29-2010, 09:55 PM
You may look into an LRP Puller Motor....

PMD/Garden Trucking sells them for a very decent price considering it's a German-made motor (second item down)...

http://www.gardentrucking.com/products.tpl?command=search&db=cma/parts.db&action=search&cart=&wording=%5Bwording%5D&eqCATEGORYdatarq=Tamiya&eqMAJORCATEGORYdatarq=products&Titlesumm=t&Titlesort=1&max=5&startAt=36

And LRP's even come out with a 2nd and 3rd variation to this motor as well, now including a brushless option....

http://www.lrp.cc/en/products/electric-motors/car/brushed/

They don't list the 'turns' of the motor online, on the box, etc.....but from what I've seen/heard these motors are 80T. But don't let that scare you into thinking the truck will creep along like a snail....with the stock pinion you'll be fine.

Hope this helps,
-Alex

No offense Alex but STAY AWAY from the LRP they are over priced and under powered I put one I had on the Dnyo and its numbers stunk so I got another one and its were worse than the first one. They were both about the same as a 35 turn motor.. I run 55 turn motors and a 6 tooth pinon on the motor it is the same as a 4 to 1 and more torque out the gate..

justinart24
09-30-2010, 03:10 PM
Tamiya Cowboy,

I forgot what pitch the pinon hear is, do you know?

Also, were did you find a 6t pinon?

I am thinking its a 32p, if it is, I found a 8t.
http://store.rc4wd.com/8-Tooth-32P-Pinion-Gear-_p_617.html

DieselKid
09-30-2010, 05:45 PM
No offense Alex but STAY AWAY from the LRP they are over priced and under powered I put one I had on the Dnyo and its numbers stunk so I got another one and its were worse than the first one. They were both about the same as a 35 turn motor.. I run 55 turn motors and a 6 tooth pinon on the motor it is the same as a 4 to 1 and more torque out the gate..

Really?! Well I guess numbers don't lie. Haven't had any real problems with the one I have, nor the one Dad has for that matter....although neither of us have ever run gear reductions or try and haul around Joe's D9, haha.

-Alex

A32Limited
09-30-2010, 08:07 PM
I put a 35 turn in my truck. It does pretty good, but I'd look at a 45 turn.

Tamiya Cowboy
09-30-2010, 10:57 PM
Really?! Well I guess numbers don't lie. Haven't had any real problems with the one I have, nor the one Dad has for that matter....although neither of us have ever run gear reductions or try and haul around Joe's D9, haha.

-Alex

LOL!!:D Yeah really.. But no they are not that great and for the price way spendy I used to run the 45 still not enuff snot so I went to a 55 and a 8 tooth and not enuff and now I run 55 and a 6 tooth and in 3 trucks I also have gear reductions on top of that..

IDontKnow
09-30-2010, 11:27 PM
Ran one of those LRP motors in my King for a while, while plenty of get up and go to pull three trailers it was very pedestrian in its speed. Decided to go back to standard motor for now. Currently experimenting with an Integy reduction unit.

roadranger
10-10-2010, 04:46 PM
Tamiya Cowboy,

I forgot what pitch the pinon hear is, do you know?

Also, were did you find a 6t pinon?

I am thinking its a 32p, if it is, I found a 8t.
http://store.rc4wd.com/8-Tooth-32P-Pinion-Gear-_p_617.html


I haven't been able to find a 6 T pinion, either...
Care to share your source for them?

also, they are 32 pitch??