PDA

View Full Version : Servonaut reverse beeper


SmallHaul
09-02-2013, 09:00 PM
i have 2 SMX's and the back up beeper does not work in either one? i am not using a servonaut esc though... do you have to use a servonaut esc to make the back up beeper work?

apfubar
09-02-2013, 11:50 PM
yes you need a servonaut sound module... and the gear change sound is only available on the M20+(fwd/rev only) and the K40(1/2/3/rev)!

Not sure what additional data they send down but it would be interesting to see if it could be included by a middle module for non servonaut speed controllers.

Cheers,
Ap

SmallHaul
09-03-2013, 11:30 AM
yes you need a servonaut sound module... and the gear change sound is only available on the M20+(fwd/rev only) and the K40(1/2/3/rev)!

Not sure what additional data they send down but it would be interesting to see if it could be included by a middle module for non servonaut speed controllers.

Cheers,
Ap

Thanks for the info. i'll look into it further to see if there is a way around it.

egronvold
09-03-2013, 05:55 PM
Seem like you need a M- or K- series ESC. Manual in English: http://www.servonaut.de/shop/media/products/0136608001345107990.pdf

Espeefan
09-04-2013, 01:37 PM
Scott, Servonaut has a handy reference on their site, that shows the different sound options, and with what ESCs. Might be helpful.

http://i1159.photobucket.com/albums/p631/espeefan4449/Servonautsoundchart_zps89d15e2d.png (http://s1159.photobucket.com/user/espeefan4449/media/Servonautsoundchart_zps89d15e2d.png.html)