PDA

View Full Version : Windows-"glass"


Snochaser
10-30-2010, 01:53 PM
Were can I get tinted "glass" (plastic) that will match the KH stock material?

-Ben

fhhhstix
10-30-2010, 04:59 PM
Ben get some pactra polycarb window tint and tint the stock one. Just spra on the inside of the window in light coats and keep aplying till you get the shade you want. Here is a link.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCY44&P=**Missing

Travis

Espeefan
10-31-2010, 12:25 AM
If you need material for home made windows on other models, Evergreen, Plastruct, and Midwest all offer various thicknesses of clear styrene, pvc, polyester, or acrylic sheets. I have only purchased clear styrene, and haven't yet used it, but will eventually. I need to make a rear cab window for my truck, as well as the blind spot, peak-a-boo window in the door.

Tower Hobbies stocks all the brands I mentioned above. It's easier to do a search on Tower for clear styrene, then to just dig through all their material listings. They have a lot listed! Hopefully you'll find something you can use.

fhhhstix
10-31-2010, 12:40 AM
If you need material for home made windows on other models, Evergreen, Plastruct, and Midwest all offer various thicknesses of clear styrene, pvc, polyester, or acrylic sheets. I have only purchased clear styrene, and haven't yet used it, but will eventually. I need to make a rear cab window for my truck, as well as the blind spot, peak-a-boo window in the door.

Tower Hobbies stocks all the brands I mentioned above. It's easier to do a search on Tower for clear styrene, then to just dig through all their material listings. They have a lot listed! Hopefully you'll find something you can use.

Here is what I use and it is much clearer than the styrene and it is shaped easily with a little heat and not to mention it is extremely flexible and strong as hec.

http://search.horizonhobby.com/index.jsp?sid=12C00948F66F&Ne=500&Ntt=polycarbonit&N=745