View Full Version : Scania W.A. Prime Mover 1/14.5
Marcel74
11-17-2010, 12:39 PM
Hello Mini Truckers ;)
Danke you for the Messages.
I buy a normaly Wedico Kit in 2007
http://img220.imageshack.us/img220/1577/49508995.jpg
After 3 Yaers construction, is this the result.
http://img137.imageshack.us/img137/3850/img3927gm.jpg
Frame is from Wedico and my self, with Osswald and Wedico Spring also tuned (original to high). The Power Train is with a 82 Watt Faulhaber Engine and a 3-Shift Gearbox from Veroma.
http://img178.imageshack.us/img178/1858/1551ay0.jpg
http://img89.imageshack.us/img89/6417/3689ik0.jpg
The Fuel tank i make with 1mm Alu, inside is a 5 pack Battery from Orion with 5100mAh on each side.
http://img98.imageshack.us/img98/9315/4178ks7.jpg
http://img57.imageshack.us/img57/2372/20086186qu3.jpg
Behind is the charing socket for the Battery
http://img57.imageshack.us/img57/4093/41980860nn5.jpg
http://img227.imageshack.us/img227/6889/66226608pf1.jpg
Inside the Toolbox is the Electrical rearpanel from Wedico
http://img227.imageshack.us/img227/308/54017919oa5.jpg
The Fender are from Wedico and is modifed by me. The Holders i made of Brass
http://img90.imageshack.us/img90/3003/3834aa6.jpg
http://img90.imageshack.us/img90/6553/3824af9.jpg
This is the 1. Part, next Part will follow soon
Thank's Marcel
Roadmasters
11-17-2010, 03:14 PM
great work! It looks awesome
kerst
11-17-2010, 04:27 PM
Wonderful work! A real improvement from the original!
Kerst
SonoranWraith
11-17-2010, 07:17 PM
Those are very nice upgrades! :)
fhhhstix
11-17-2010, 08:00 PM
That is a sharp looking truck nice job.
Travis
Brian in PA
11-17-2010, 09:26 PM
WOW!! One of the nicest Scania's I've seen!
Brian
Losiassociated
11-18-2010, 05:26 AM
WOW!!!
Nice job man keep it up and coming.
Greg
diesel950
11-18-2010, 06:27 AM
nice upgrade work!
certainly has the right look
for down under!
Marcel74
11-20-2010, 12:07 PM
Oh, thanks im Surprised about your answers :rolleyes:
In this Part i show you my Aussie Attachments, all of this i made by my self because it gives no Dealer for this Part's.
Airintake & Exhaust
http://img228.imageshack.us/img228/9753/49181jm2.jpg
http://img228.imageshack.us/img228/6378/49321bp5.jpg
http://img148.imageshack.us/img148/9711/49621ku1.jpg
http://img243.imageshack.us/img243/9463/49971of3.jpg
The Exhaust is from Wedico (Century) but i must modyfied the Pipe, because it was to smal :D
http://img243.imageshack.us/img243/8536/img49801ci7.jpg
Stoneguard for Windscreen
The Frame is Alu and the Net is from a frying pan oil guard (i hope this is corect).
http://img137.imageshack.us/img137/5224/1000ku1.jpg
http://img137.imageshack.us/img137/2231/1002tf9.jpg
http://img137.imageshack.us/img137/3504/1003qr1.jpg
Bull bar (Roo bar)
It beginns with a Aluminum Block like this
http://img136.imageshack.us/img136/4738/94447342qp4.jpg
after lot of hours at the metal milling and drilling it would by like this
http://img75.imageshack.us/img75/7442/48271kr9.jpg
http://img75.imageshack.us/img75/319/48161ux0.jpg
http://img193.imageshack.us/img193/5605/9221g.jpg
http://img193.imageshack.us/img193/5348/9201.jpg
The Road Train sign is covered by a magnetig Plate
http://img193.imageshack.us/img193/6944/9211s.jpg
http://img21.imageshack.us/img21/8623/img11861h.jpg
I know the Bull bar is not 100% Scale, it is a combination of 5 Bullbar's ;)
Thanks Marcel
Bigrigger
11-20-2010, 12:15 PM
Looking Good Marcel! I really like all the parts you milled! You have skill.:D
SonoranWraith
11-20-2010, 01:22 PM
That bar is very functional and well built. I like the lights and the magnetic plates. And yes the frying screen is good stuff, it even comes in stainless if you aren't painting. :)
Semi Joe
11-20-2010, 07:10 PM
man talking about some nice upgrades wow! keep up the awesome work
Losiassociated
11-21-2010, 05:18 AM
Great job so far keep it up.
Greg
Marcel74
11-21-2010, 10:44 AM
Thank You :)
The Parts need lot of time. Measured, design and made. Some i must made twice ;) .
After finish the Construction i painted the Frame in RAL 7021 is similar like original Scania Frame Color.
First Primer
http://img12.imageshack.us/img12/8379/46557366.jpg
Second Color
http://img12.imageshack.us/img12/5696/83111880.jpg
http://img12.imageshack.us/img12/3534/83937790.jpg
The Weels from Leimbach and Fifth Weehl is from Tokle.
http://img219.imageshack.us/img219/5100/50811.jpg
Scania Wheel Hub
red=Leimbach Wheel Hub
blue=New Scania Wheel Hub
http://img136.imageshack.us/img136/8246/scanianabe3.jpg
http://img136.imageshack.us/img136/7448/50661.jpg
Next Part Follow soon, thanks Marcel
mazdaparts
11-21-2010, 08:10 PM
Holy crap that is awesome work. Very good looking truck. I can't wait to see more.
Espeefan
11-25-2010, 12:40 PM
This is a beautiful looking Scania! I really like your eye for detail and the custom parts you made for it. This is what a Wedico should be. Seeing your truck completed, and how great it turned out, I can say the three years of building is well worth the effort and wait. I've been building my own Wedico, on and off, for 4 years, so now I don't feel so bad about it taking a long time!
Looking forward to seeing more photos!
firefighter-1177
11-25-2010, 01:14 PM
That is a great looking truck. Kind of makes me want to get a Scania.
Marcel74
11-26-2010, 01:38 PM
Thank You for the compliments
This is a beautiful looking Scania! I really like your eye for detail and the custom parts you made for it. This is what a Wedico should be. Seeing your truck completed, and how great it turned out, I can say the three years of building is well worth the effort and wait. I've been building my own Wedico, on and off, for 4 years, so now I don't feel so bad about it taking a long time!
Looking forward to seeing more photos!
i had few interruptions between the Construction stages . sometimes I built a little bit the Trailers ;) .
kamyoncu
11-30-2010, 12:08 PM
There is really big differance with the standart kit and your truck. It is really lovely scania !
Marcel74
12-04-2010, 07:57 AM
Thanks
In this Part i show you some modification about the Cab. First i made a Alu plate for reinforcement the Cab, of course also for the new Cab look. The Alu plate have the same high like the Original Cab.
http://img71.imageshack.us/img71/8619/1000ss8.jpg http://img204.imageshack.us/img204/8410/11og6.jpg
I modified also the Mudguard
http://img217.imageshack.us/img217/4742/41118.jpg
The Cab look i made in Brass and is functional.
http://img403.imageshack.us/img403/9200/75533715yu8.jpg
http://img403.imageshack.us/img403/6838/83361403jr2.jpg
from the inside it looks like, he works like a sliding mechanism.
http://img403.imageshack.us/img403/354/81399053oi7.jpg
the new Cab entry
http://img218.imageshack.us/img218/5406/3643cf2.jpg
I need a another Cockpit for down Under because of the right hand drive. My Dealer in Swtzerland show me a RHD Wedico Cockpit (i was surprised, but Wedico made this for the british market). But the problem was the same it was too flat. After this i made one in ABS it looks better than the Original Wedico but it was lot of work.
http://img16.imageshack.us/img16/6172/5867.jpg
http://img16.imageshack.us/img16/9758/5873c.jpg
http://img16.imageshack.us/img16/9572/5883.jpg
I modified also the Mirrors, the Wedico's are not bad but a litttlebit square
http://img27.imageshack.us/img27/5870/58961d.jpg
http://img27.imageshack.us/img27/7558/59031.jpg
The mirror effect are from a ABS-Mirror plate that i find by a Dealer.
http://img27.imageshack.us/img27/6697/59261.jpg
At the Next Part i show you som kinds of unforeseen ?
tc1cat
12-04-2010, 09:00 AM
WOW!!!:eek: Your attention for detailing is outstanding! Your functional cab lock is the best I have seen. Your RHD dash almost looks real! Can't wait to see what is next.
Lynn
muskater
12-12-2010, 12:14 PM
wow!!!!!
that is a cool truck
great attention to the details
Marcel74
12-19-2010, 09:46 AM
Thank you
Since I paint defects on the cab was, I decided to paint this again. Before I started I have some details still better built than Wedico.
For example, the curve behind the door, which was previously too square.
http://img39.imageshack.us/img39/6899/59981.jpg
a rounded upper part of the sun visor.
http://img39.imageshack.us/img39/903/20091v.jpg
roof spoiler and side were rebuilt somewhat Original. With new Holders
http://img39.imageshack.us/img39/8138/59861.jpg
http://img39.imageshack.us/img39/4043/59891.jpg
http://img39.imageshack.us/img39/4619/59961.jpg
http://img822.imageshack.us/img822/3561/9341.jpg
http://img39.imageshack.us/img39/6451/60041.jpg
here the new color, similar to that of Zambonetti
http://img140.imageshack.us/img140/1774/60193.jpg
http://img140.imageshack.us/img140/1113/60161.jpg
Here are some pictures when I had finished the model
http://img519.imageshack.us/img519/2893/20131.jpg
http://img18.imageshack.us/img18/5946/33311.jpg
with B-Double Combination
http://img697.imageshack.us/img697/3163/img3292lw.jpg
http://img697.imageshack.us/img697/2038/img3303v.jpg
fhhhstix
12-19-2010, 11:59 AM
Wow that is an amazing truck you should be real proud of it and by far the best Scania I have seen and the blue really fits the it as well.:cool::cool:
Travis
hitachi
12-19-2010, 12:55 PM
nice truck with nice details :)
SonoranWraith
12-19-2010, 11:52 PM
Great subtle upgrades marcel! I like the redo. :)
Marcel74
12-23-2010, 02:45 PM
Hi, Thanks :rolleyes:
Great subtle upgrades marcel! I like the redo. :)
sorry but what you mean with redo?
vmilnik
12-23-2010, 03:12 PM
that is one awesome looking truck
SonoranWraith
12-24-2010, 10:14 AM
Hi, Thanks :rolleyes:
sorry but what you mean with redo?
Redo as in to do again. :) Same as in your repaint came out great!
JAMMER
12-24-2010, 11:48 AM
You have done some very nice work there inside and out. That Scania will do you proud. Ed
Marcel74
12-30-2010, 12:04 PM
Thank you
Redo as in to do again. :) Same as in your repaint came out great!
Thanks for the explanation.
I used the electrical system of Wedico, controller and sound module is from Servonaut. Total I have installed 84 LED.
The lights in the sun visor I have built from Plexiglas with 1206
http://img193.imageshack.us/img193/2343/23451.jpg
http://img98.imageshack.us/img98/1983/24461.jpg
Parking light
http://img708.imageshack.us/img708/5121/24881.jpg
with Lowbeam
http://img293.imageshack.us/img293/2969/24891.jpg
with spotlight
http://img32.imageshack.us/img32/381/24901.jpg
and add spotlight, Total 200'000 MCD luminosity. Now i have a RC-Flashlight :)
http://img20.imageshack.us/img20/6527/24911.jpg
Side marker lamp
http://img18.imageshack.us/img18/8790/33611j.jpg
http://img18.imageshack.us/img18/5281/33141.jpg
And something else behind the vehicle as Zambonetti's Scania.
http://img839.imageshack.us/img839/8146/scania014.jpg
http://img839.imageshack.us/img839/3996/36481.jpg
I hope that you liked the lighting.
FreddyGearDrive
01-01-2011, 04:34 PM
The only word that pops in my head is,WOW! Just beautiful!
FGD
egronvold
01-01-2011, 05:41 PM
A very detailed and scale- looking truck! Job well done on the lights.
Snochaser
01-01-2011, 08:44 PM
That truck is absolutely beautiful!!! Great job! I'd love to have it.
Ben
540-MAN
01-02-2011, 02:54 AM
That looks really good. Where can i get a bullbar for my 540-MAN? Or who can make me one?
Marcel74
05-11-2011, 10:00 AM
Thanks
In the last few months I was able to build the trailer on. I know my combination is not quite the provisions of Western Australia. Are AB-triple road train it but my model is converted to long, but I like this combination. Moreover, the model in the B-Double operation Parcour fit.
http://img683.imageshack.us/img683/3875/img5895l.jpg
http://img196.imageshack.us/img196/6807/img5892c.jpg
http://img15.imageshack.us/img15/4549/img5897qs.jpg
The model is 2.85 meters long and empty weight about 15 kg
Nice work Marcel, it is a great looking Scania and road train
Azorean
05-11-2011, 06:44 PM
WOW, great job man...
glorydays24
05-11-2011, 11:13 PM
Very nice scania, I myself have one getting ready to get started on and I might make a b-train out of two tankers. Excellent eye for detail.
Big John
aussietruckerguy
05-12-2011, 09:18 AM
thats a sweet build with the trailers. It has inspired Me to do more with my tamiya one and make it look more like the one I drive. Just with different colours and a road train build instead of a B double configuration.
RcConstruction
05-12-2011, 07:04 PM
that is a very nice scania and roadtrain. great work on the right hand drive dash
zak
rappy
05-13-2011, 03:17 AM
What can i say well **** hot :) like the trailer set up
Brian in PA
05-13-2011, 07:07 AM
That is one good looking Scania! The first pic looks real!
Brian
Marcel74
05-13-2011, 11:15 AM
Thank you, nice that you like my model. I know a lot of work ahead of me.
aussietruckerguy
05-14-2011, 10:53 PM
marcel, is there any chance that you can measure your exhaust and intake diameters on the headache rack, as i need that to model the same thing on my scania as im just a bit lost without finding good shots of the real thing online.
Thanks
Marcel74
05-16-2011, 03:01 PM
marcel, is there any chance that you can measure your exhaust and intake diameters on the headache rack, as i need that to model the same thing on my scania as im just a bit lost without finding good shots of the real thing online.
Thanks
The Exhaust is the Original from Wedico Art. Nr. 464 i made new pipes with 10mm diameter, the Original from Wedico was to small and short.
The Intake "Snorkel" is 11mm high and 16mm wide, narrows to the rear
to 13,5mm. The diameter in the lower part is also 13.5mm. the Pipe to the Air Filter is 11 an 12mm in the diameter.
http://img228.imageshack.us/img228/6149/49131gm6.jpg
http://img228.imageshack.us/img228/9753/49181jm2.jpg
The mass is in Scale 1:14,5 (Wedico). I have only 2 pics for the Snorkel, one from OZ Scania (front view) and a Swiss Kenny (side view), I then converted these into the scale
I do not know precisely how they are, maybe there is someone here in the forum you just give the original mass.
jjackso5
05-16-2011, 03:27 PM
WOW! Just a great model, attention to detail is outstanding!
Thank you for posting your project,
Jim
Big Run
05-17-2011, 02:59 AM
Absolutely fantastic!
Another great use for a Scania! Never thought it could look this good.
Big Run - And so the Scania grows on me... as does everything...
aussietruckerguy
05-17-2011, 04:20 AM
Thanks for the dimensions, im amazed with the detail, only hope my tamiya scania can look as good as yours.
grumpygrady
05-18-2011, 12:00 AM
great job on the truck
it is as close to looking like the real thing as you can get
if you have other builds please post them
Marcel74
07-05-2011, 02:02 PM
Thanks
if you have other builds please post them
At the moment no other Projekt at work. First, the trailers are finished. In planing is a CR16 8x8 dump truck.
A small detail is finished, the WA Custom Car-Plate.
http://img40.imageshack.us/img40/682/img6099c.jpg
Furthermore, a still photo from the last event in Switzerland.
http://img97.imageshack.us/img97/4029/img6444h.jpg
http://img135.imageshack.us/img135/8962/img6480n.jpg
http://img221.imageshack.us/img221/9696/img6505g.jpg
http://img12.imageshack.us/img12/6313/img6520u.jpg
Trucker Al
07-05-2011, 07:02 PM
Love your 'LOADS' and the whole truck...
Marcel74
08-14-2012, 05:26 AM
After little Break, the construction goes on :rolleyes:
First a few pics from Events
http://img402.imageshack.us/img402/8120/img6994o.jpg
http://img819.imageshack.us/img819/4131/img7006z.jpg
http://img594.imageshack.us/img594/7198/69831.jpg
I made a little bit on the Trailers. The rear bumber for the Dolly and the Lead was milled by a 8mm Alu-platte.
http://img442.imageshack.us/img442/672/402ia.jpg
http://img441.imageshack.us/img441/3106/404c.jpg
http://img37.imageshack.us/img37/4412/405zc.jpg
For the 45" Trailer, i made alu-plates on the exist brass-bumber. the holes are for the LED because of the small mounting deep of the original rearlights.
http://img685.imageshack.us/img685/3879/409mt.jpg
http://img221.imageshack.us/img221/4481/411zm.jpg
I went for the rail construction aluminum holder.
http://img839.imageshack.us/img839/6403/428y.jpg
http://img38.imageshack.us/img38/6337/427pj.jpg
http://img801.imageshack.us/img801/9246/419m.jpg
Next, I have 106 brass holder soft solder :(
dabears
08-14-2012, 11:21 AM
WOW that bumper looks great!! I love your idea for your rail jig!
aussietruckerguy
09-22-2012, 11:16 PM
Yet again Im amazed with the quality of your modelling!
crawler07
09-26-2012, 08:09 AM
amazing work of art sir! my fav pics are the ones of the chassis in paint just sittin their waiting on the finishing touches!!thanks for sharing..
Marcel74
09-27-2012, 02:05 PM
Thank you,
Here are the result of the Rail after solder, i know i have lot of work to finish the Rail.
http://imageshack.us/a/img404/8509/44855559.jpg
http://imageshack.us/a/img69/6031/38835489.jpg
I made a second Toolbox for each Trailer with 2mm ABS.
http://imageshack.us/a/img338/1109/94296401.jpg
http://imageshack.us/a/img96/2969/13554430.jpg
The Tyre Carrier i dit it with 3mm brass.
http://imageshack.us/a/img833/641/84197348.jpg
http://imageshack.us/a/img818/3826/59549315.jpg
And 2 pics to see how it looks like.
http://imageshack.us/a/img4/750/16841470.jpg
http://imageshack.us/a/img707/7412/64040535.jpg
egronvold
09-27-2012, 02:20 PM
Very nicely done! Quite the rig you got there.
plow jockey
09-27-2012, 05:02 PM
Nice scania.Great looking trailers.Awesome work,great details!
AzItalian
09-28-2012, 11:28 PM
u got my attention brother...best quality detail on a wedico...
Marcel74
09-30-2012, 06:27 AM
Thank you
Next, i need 22 Mudguards :rolleyes: . am making this probably made of cast resin.
aussietruckerguy
09-30-2012, 08:05 AM
Great detail and it looks just like the real thing!! Well done, I hope I can get my two scanias to this level.
dabears
09-30-2012, 10:08 AM
Those trailers are prob the best ones ive seen yet!
Claus
09-30-2012, 09:16 PM
Beautiful build! Great attention to details.
Espeefan
09-30-2012, 10:33 PM
This build is really nice. Not many Wedicos around this forum, but yours is one of the best. I like the details and effort you put into making this truck turn out so great. The lights are awesome, and the trailers look really nice, even if they aren't finished yet. Keep it up.
crawler07
10-01-2012, 04:16 PM
wow all your details are so clean. i will take notes on those tire carriers for sure, as im about to build one for my dump truck..
rappy
10-01-2012, 05:31 PM
love the trailers very nice indeed :)
aussietruckerguy
10-02-2012, 12:16 AM
Still amazed with your modelling. Have you got any more information on the fabrication of those trailers? There an amazing example of modelling.
Claus
10-02-2012, 12:20 AM
Are you happy with the Veroma transmission and it's ratios? I'm currently building a Wedico Peterbilt with the aluminum 3 speed, dual Buhler motors and a PMD 4:1 reduction. I'm very happy with the speeds but not very happy with the transmission or the combination box, both have weaknesses.
JoseFL10-4
10-05-2012, 11:36 PM
VERY NICE AND CLEAN JOB, AWESOME
Marcel74
10-06-2012, 08:41 AM
Thank you :)
Still amazed with your modelling. Have you got any more information on the fabrication of those trailers? There an amazing example of modelling.
The Trailers Cargoarea lenght are 525mm and 945mm and the Wide is 172mm.
I built the Chassie from a 2mm L-Profil with 5mm brass holder. At the Trailers front i built a 6mm aluminum plate for the Kingpin. The Wheels are from Leimbach and the landing legs are from Schulztec.
http://imageshack.us/a/img219/1931/3519ch6.jpg
http://imageshack.us/a/img838/7459/img6129q.jpg
http://imageshack.us/a/img806/2709/img6125.jpg
http://imageshack.us/a/img233/6303/img6126p.jpg
Are you happy with the Veroma transmission and it's ratios? I'm currently building a Wedico Peterbilt with the aluminum 3 speed, dual Buhler motors and a PMD 4:1 reduction. I'm very happy with the speeds but not very happy with the transmission or the combination box, both have weaknesses.
Im happy with it, the ratio is good. Some have problems with the Second Speed but my transmission is ok. I don't need a combination box, because the Motor have enough power ;).
Claus
10-06-2012, 02:06 PM
I wasn't very clear, it's the Wedico transmission I had problems with. Was thinking about using the Veroma but went with the RC Channel transmission for now. Thank you for your reply.
Keep up the build, looks great!
Marcel74
10-20-2012, 04:40 AM
for the Mudguards I turned myself a suitable aluminum tube that this is in compliance with the original "plastic Mudguards". After the pipe was cut in half, there were still glued aluminum statements.
http://imageshack.us/a/img593/8713/0436dt.jpg
http://imageshack.us/a/img843/7346/1670e.jpg
Comparison blank and Cast Resin.
http://imageshack.us/a/img692/1081/1632r.jpg
I need 22 pieces for the trailer.
http://imageshack.us/a/img248/1851/1637u.jpg
On the trailer it looks like.
http://imageshack.us/a/img715/4826/1650b.jpg
http://imageshack.us/a/img822/1880/1660c.jpg
http://imageshack.us/a/img641/4892/1652l.jpg
Claus
10-20-2012, 05:02 AM
Great work on the fenders, they look fantastic.
aussietruckerguy
10-20-2012, 09:06 PM
VERY NICE!!!! I need some of those too. What was the other website that you posted this build? It had some great photos and information but I lost the web link. Thanks Andrew. BTW Im building a van road train using the tamiya kit. Starting to look good thanks to your good ideas.
Marcel74
10-22-2012, 12:36 AM
Thanks
Can you tell me about the landing gear? Is it powered?
Is from schulztec and is powered by Faulhaber motor. I order not the normaly lenght, is a little bit shorter. Is very expensiv, but they have a lot of power.
http://schulztec.de/shop/catalog/product_info.php?cPath=21&products_id=28
VERY NICE!!!! I need some of those too. What was the other website that you posted this build? It had some great photos and information but I lost the web link. Thanks Andrew.
Sorry, is in 1:14,5 Scale ;) . It is on the Modelltruck website (is in german), here is the link to the post.
http://www.modelltruck.net/showthread.php?22733-Scania-R-580-von-Wedico-B-Double-oder-Road-Train
aussietruckerguy
10-23-2012, 12:11 AM
well my german is very rusty so google translate to my rescue.
Thanks for the link, again its a amazing model
Straywolf
06-10-2013, 12:04 AM
Hello Mini Truckers ;)
Danke you for the Messages.
I buy a normaly Wedico Kit in 2007
http://img220.imageshack.us/img220/1577/49508995.jpg
After 3 Yaers construction, is this the result.
http://img137.imageshack.us/img137/3850/img3927gm.jpg
Frame is from Wedico and my self, with Osswald and Wedico Spring also tuned (original to high). The Power Train is with a 82 Watt Faulhaber Engine and a 3-Shift Gearbox from Veroma.
http://img178.imageshack.us/img178/1858/1551ay0.jpg
http://img89.imageshack.us/img89/6417/3689ik0.jpg
The Fuel tank i make with 1mm Alu, inside is a 5 pack Battery from Orion with 5100mAh on each side.
http://img98.imageshack.us/img98/9315/4178ks7.jpg
http://img57.imageshack.us/img57/2372/20086186qu3.jpg
Behind is the charing socket for the Battery
http://img57.imageshack.us/img57/4093/41980860nn5.jpg
http://img227.imageshack.us/img227/6889/66226608pf1.jpg
Inside the Toolbox is the Electrical rearpanel from Wedico
http://img227.imageshack.us/img227/308/54017919oa5.jpg
The Fender are from Wedico and is modifed by me. The Holders i made of Brass
http://img90.imageshack.us/img90/3003/3834aa6.jpg
http://img90.imageshack.us/img90/6553/3824af9.jpg
This is the 1. Part, next Part will follow soon
Thank's Marcel
In the third picture where did you find your hex bolts and nut's at, if i may ask? Your build look's really great!!
Mike
Marcel74
07-16-2013, 09:28 AM
Hi Mike
Thanks, the hex bolts and nut's are from Knupfer (Germany)
http://www.knupfershop.de/shop/
Burnt Rubber
10-10-2013, 09:47 PM
Nice
Super awesome! Great attention to detail!
crawler07
02-18-2014, 08:20 AM
Amazing build Marcel! All the details and paint work is out of sight man!
one question, what are you using to attach the aluminum pieces together with? weld braze bolt?
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.