View Full Version : Mercedes SK Fire Pumper "A normal german Firetruck"
Hi Folks.
I show in the "Welcome new Members" Thread some of my Models and some Users would like to read a little Blog about the building time. So i started here. ;)
I hope you can understand my English... :lol:
The real 1:1 Firetruck that i reconstructed is a Truck of my Fire Brigade.
http://files.bos-fahrzeuge.info/vehicles/photos/6/d/a/8/49393-large.jpg
Its startet with this Tamiya Mercedes Benz SK1818 and an old second Cab.
http://up.picr.de/16704030rv.jpg
The first Step was the Roof and the second Cab. I singed the roof 5mm and put the second Cap behind the First.
http://up.picr.de/16729567cm.jpg
http://up.picr.de/16740533gh.jpg
Then i build the Ground of the Equipment-Case (is it the right Name?)
http://up.picr.de/16740534wt.jpg
Next Step.
The rear Wall, both Fenders, the Batterybox, the first of two Boxes and a fog of white paint.
http://up.picr.de/16776441gk.jpg
http://up.picr.de/16776440pg.jpg
http://up.picr.de/16784938xk.jpg
http://up.picr.de/16784939ju.jpg
Its all build with 2mm Polystyrolplates
The first red Paint.
http://up.picr.de/16831405gf.jpg
In Contrast to the original Truck get the Model a Watercanon. But i cant´t find a working Canon to buy. So i make a own One. Its a 7mm Pipe, a 3mm Pipe with 1mm diameter and a hosepipe from a Infusion.
http://up.picr.de/16942148dp.jpg
http://up.picr.de/16942149on.jpg
http://up.picr.de/16942146fs.jpg
I move the Cacon with a regular Servo.
klick (https://www.youtube.com/watch?v=6TUSaCZnAwI&list=UU-ZGppBPi3AWU56scUIAuIw)
http://up.picr.de/16984312mc.jpg
Here can you see the Pump, too. She carries 1,8 Litres in a Minute.
klick (https://www.youtube.com/watch?v=ieGRIUbTawQ&list=UU-ZGppBPi3AWU56scUIAuIw)
Importend for a Firetruck... The blue Lights :D
http://up.picr.de/16961686rx.jpg
I use three rotating Lights from Pistenking.
here is a small Video from the Lights:
klick (https://www.youtube.com/watch?v=7BR6PcSn4is&list=UU-ZGppBPi3AWU56scUIAuIw)
It goes on.. :p
The Interior. I make two Pics outside the Cab an then i forget to make more Pics.. :mad:
http://up.picr.de/16996443sm.jpg
http://up.picr.de/16996444vf.jpg
I have only these.. But not in a good Quality
http://up.picr.de/17062641qe.jpg
http://up.picr.de/17062637ai.jpg
In the rear Door i can change between a Tank an an extern Hydrant or something else. I realised it with accessories from Infusions.
http://up.picr.de/17003987yg.jpg
http://up.picr.de/17003989du.jpg
The Tank is for 250ml Water. It is sufficient for 20 seconds. :rolleyes:
Video (https://www.youtube.com/watch?v=L-Xbt3i5EVk&list=UU-ZGppBPi3AWU56scUIAuIw)
Now cames the Technolegy.
A CTI Thor 15hc fr driving,
A CTI Thor 14 for the Pump
CTI ps4b8 and ps4a for the Lights
An external BEC
A Soundmoul from LE Elektroniks for the Siren an Enginesounds
A Flashlightmodul for the two Strobes
and a lot of cables... :D
http://up.picr.de/17062650vx.jpg
http://up.picr.de/17070112uj.jpg
Next Step.. :p
The Backlights. They´re from Veroma and Lego.
http://up.picr.de/17070114gt.jpg
The Roof:
Its a 0,5mm Polystyrolplate... It was a bad Idea, because it was to thin... :mad:
It looks good for the first time... Then breakes.. I changed it meanwhile to a Aluminiumroof.
http://up.picr.de/17080377fh.jpg
http://up.picr.de/17080393tj.jpg
http://up.picr.de/17113914mn.jpg
Next Step.
The Hose Reel (Is it the right Name?)
Its a wooden Reel with Polystyrolsticks.
http://up.picr.de/17119700um.jpg
http://up.picr.de/17119696wb.jpg
http://up.picr.de/17119694uh.jpg
http://up.picr.de/17128422kj.jpg
Another Step :p:p:D:D
The Sirens an a Fender for the Lights.
http://up.picr.de/17212834up.jpg
glorydays24
06-16-2014, 09:48 PM
You have put a lot of thought into this, and it is turning out nice.:D:D:D Keep up the good work and keep the pic's coming.;)
Big John
Hey,
here are the Pics after the Building-time.
http://up.picr.de/17246488kv.jpg
http://up.picr.de/17246549lu.jpg
http://up.picr.de/17246532ze.jpg
http://up.picr.de/17246570kb.jpg
http://up.picr.de/17246467ot.jpg
http://up.picr.de/18642239yy.jpg
http://up.picr.de/18642240dz.jpg
4X44DAD
06-17-2014, 07:59 AM
that is awesome sir
Stuff
06-17-2014, 09:27 PM
done very very well!!
the Dutch guy
06-23-2014, 01:55 PM
Very nice looking firetruck.
Daveroo
07-24-2014, 07:52 PM
wow..thats very nice,but id like a lesson in German Fire fighting,the rear mounted hose reel,is that dismounted at a fire and pulled by hand to the hydrant?or from the engine to a second engine or the fire scene itself?..
where i worked,we had the supply line hoses (normally two and a half inch,cotton jacketed canvas hose) loaded on the truck bed above the tank,with equipment compartments on the rear and sides of the body,we lay the supply lines from the hydrant to the fire,or if 3rd or 4th in to the call,we then lay from the engines at scene back to a hydrant.i hope that makes sence...id just like to know more about that reel with the wheels.
inspector419
09-23-2014, 02:44 PM
Awesome!
I have a question... what paint use?
NYHowie
09-23-2014, 04:36 PM
Very nice.
Actros4160
09-23-2014, 06:59 PM
What kind of truck you building a TLF16 or an LF16.:D
Well, I looked up the web side and found out that you are building the TLF16 version.
Very nicely done.
wow..thats very nice,but id like a lesson in German Fire fighting,the rear mounted hose reel,is that dismounted at a fire and pulled by hand to the hydrant?or from the engine to a second engine or the fire scene itself?..
We use the Hose for the Distance between the Truck and the Fire Scene and between a potable Pump and the Truck.
Awesome!
I have a question... what paint use?
I use Spraypaint from AutoK and waterbased Paint from Revell.
What kind of truck you building a TLF16 or an LF16.:D
Well, I looked up the web side and found out that you are building the TLF16 version.
Very nicely done.
Yes, it is the TLF 16/25. :)
The Reel Hose is a special for this Truck ;)
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.