Need help with Programming Turnigy 9x Aux.3 f.mode switch.

[Kingcam2]

Hi every,

I am having a hard time trying to work out how to progarm the Aux.3 F.mode switch to be used with the Tamiya 3 speed gearbox,

I have tryed this tutorial Chris put up but it didn't work at all, not sure if that because you maybe have to re bind the Radio to Receiver when you change the mode from HEIL to ACRO?

australian-rc-truck.proboards.com/thread/22/trunigy-9x-radio?page=2

I have google and youtube the problem with out find the information I need.

At the moment my truck will not move as there something wrong with my progarmming when I try to progarm the aux.3 switch.

I need to get this going before the weekend as we Victorian Rc Truckers inc have a display on in geelong this weekend.

I am not running a Mfu, just esc to sound unit and have the steering and gearbox plug in to the Receiver.

This is my Receiver setup at the moment.

Steering is on channel 1,
Esc and sound unit is on channel 2,
Gearbox is channel 3.

L/H stick is for forward and reverse (up and down)

R/H stick is Gears (up and Down) and steering (left and right)

I need to move my gears to the Aux.3 switch, it driving me nuts having it on my R/H Stick with my steering.

Any help will be great?

Regards Cameron.

[Kingcam2]

update I have work it out now,

[apfubar]

Cameron,

Do you mind explaining how you solved it?

Cheers,
Ap