Re: Metso Lokotrack LT120, Jaw Crusher.
Quote:
Träffat kärleken i Usa? :) |
Re: Metso Lokotrack LT120, Jaw Crusher.
Here are some more progress from today...
http://i172.photobucket.com/albums/w...psdusfeakj.jpg http://i172.photobucket.com/albums/w...ps63tl0fys.jpg http://i172.photobucket.com/albums/w...pstxncbtnn.jpg http://i172.photobucket.com/albums/w...psmlfzeaaq.jpg http://i172.photobucket.com/albums/w...pskvnpvmvn.jpg |
Re: Metso Lokotrack LT120, Jaw Crusher.
Quote:
|
Re: Metso Lokotrack LT120, Jaw Crusher.
I wouldn't have thought you could curve the frame like that & the conveyer belt still work. :eek:
Did you taper the ends of your drive roller at all, to help the belt run center? |
Re: Metso Lokotrack LT120, Jaw Crusher.
Quote:
Quote:
Yes I just recently got a tip from a friend to taper one of the rollers to get it to self center, I made the taper 0.5mm smaller on the ends, no more walking of the belt! :) |
Re: Metso Lokotrack LT120, Jaw Crusher.
Any more progress on this outstanding build?:popcorn:
|
Re: Metso Lokotrack LT120, Jaw Crusher.
Quote:
I did re-weld it the other day though, so now it shouldn't break loose. One more thing I have noticed is that the crush plates should go into each other if you would lay them together, as the sit in the crusher now, the tops of the pattern lines up with each other, guess it would crush better the other way. That's about it, it's summer now and I don't spend much time in this hobby this time of the year, more of a "get through the winter" kinda hobby. :) |
Re: Metso Lokotrack LT120, Jaw Crusher.
I noticed too that the plates need to be offset . It would definitely take less effort to crack a rock in half pressing it over a sharp point evenly rather than pinching it like wire cutters work.
I am working on some crushing equipment as well, but a slightly larger setup using existing laboratory crushers. |
Re: Metso Lokotrack LT120, Jaw Crusher.
Interesting build, looking forward to see progress and ofcourse a video when crushing!
|
Re: Metso Lokotrack LT120, Jaw Crusher.
Quote:
Any pics of that build? Quote:
|
Re: Metso Lokotrack LT120, Jaw Crusher.
Quote:
|
Re: Metso Lokotrack LT120, Jaw Crusher.
As I sold the crusher a few months ago I still had a few parts left from the lasercutter to make another one, but I only have parts to make the crusherbox, so thats what Im going to do for now.
But this will be a slower build I think, I also lost all cad files when my harddrive gave up, Im going to let someone take a look to see if I can get some files back. So I started to make another eccentric, axle is the exact same as the first one, 4mm throw, seem to work pretty good, one thing I will change later is the crush plates, this time they will be offset to each other, made that misstake on the first one to have them edge to edge. Oh well, here is what I have so far... http://i172.photobucket.com/albums/w...pscaafdheb.jpg http://i172.photobucket.com/albums/w...pskngmphkt.jpg http://i172.photobucket.com/albums/w...psawuftoci.mp4 http://i172.photobucket.com/albums/w...psp0a99ruu.jpg http://i172.photobucket.com/albums/w...ps00y5j3lq.jpg http://i172.photobucket.com/albums/w...pshp0qwtve.jpg |
Re: Metso Lokotrack LT120, Jaw Crusher.
We had my Denver jaw crusher out last month for Cabin Fever Expo. Worked great!
I still haven't had time to edit some video of it working crushing hard Limestone. Something you may want to consider on your jaws along with the offset teeth are; Curved jaws. Watching my machine chew the rocks it looks like the curve jaw makes it feed well. |
Re: Metso Lokotrack LT120, Jaw Crusher.
Quote:
Is only the moving jawplate curved on yours? Also, how much throw does the eccentric have? |
Re: Metso Lokotrack LT120, Jaw Crusher.
Nice project and great job! I´ve some worries if the excenter shaft will be strong enough...made of brass. A friend of mine built a chrusher years ago and had some trouble with teh shaft and bearings in the beginning. After changing ball into roller bearings it runs great...
But that was just an idea...keep on with your crisher. It looks great!;) |
Re: Metso Lokotrack LT120, Jaw Crusher.
Quote:
Bear in mind that my crusher is a real machine in the sense that it is commercially built. As far as I know ,these are used for testing small amounts of ore in a laboratory. Here's a view of the jaws I took last summer. http://imageshack.com/a/img921/5847/6mHh2u.jpg |
Re: Metso Lokotrack LT120, Jaw Crusher.
Great to see you're gonna have another go at Kalle :cool:
Has the Norwegian ever sent you any finished pics your old one? |
Re: Metso Lokotrack LT120, Jaw Crusher.
Quote:
Yes you might be right on the brass shaft, but on the first one I did some testing crushing real rocks and it did at least hold up for that, but this time I will use a larger beltdrive and flywheel and see how that goes, I can always turn a new shaft from steel if brass dont hold up. I will try ball bearings for now, I had almost all of them on the shelf so we will see how they last. Quote:
Quote:
I have some pics, not finished though, talked to him yesterday and he had been busy with work so no time for building. http://i172.photobucket.com/albums/w...sajafxnz2.jpeg http://i172.photobucket.com/albums/w...sneg9i2vc.jpeg |
Re: Metso Lokotrack LT120, Jaw Crusher.
Made a little progress, made the 2 holders for the bearings.
I got the tolerances a little sloppy on 2 spots on the shaft, I think i will go for a shaft in steel and get the tolerance right and at the same time a stronger shaft like Grainfarmer said. Might also go for roller bearings later on, found SKF roller bearings on Ebay that had a good price. http://i172.photobucket.com/albums/w...ps5i9q2dav.jpg http://i172.photobucket.com/albums/w...ps7z1gprcx.jpg http://i172.photobucket.com/albums/w...psbvxgdgjo.jpg |
Re: Metso Lokotrack LT120, Jaw Crusher.
hi this is an awesome machine great build i see a chain and sprocket on the conveyer where did you find them ? i could use some for a trommel i am makeing
|
All times are GMT -4. The time now is 05:16 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.