RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Construction Equipment (https://www.rctruckandconstruction.com/forumdisplay.php?f=6)
-   -   HIAB X-HIPRO 1058 loader crane (https://www.rctruckandconstruction.com/showthread.php?t=13644)

Hemi1966 04-04-2020 08:09 AM

Re: HIAB X-HIPRO 1058 loader crane
 
Here's a few pictures of assembled crane :)
Next I should probably start making the telescopic arm.

https://i.postimg.cc/8crLJtG6/IMG-1333.jpg

https://i.postimg.cc/XXSdwdND/IMG-1330.jpg

https://i.postimg.cc/nVsWGxcv/IMG-1326.jpg

jack van 04-04-2020 06:38 PM

Re: HIAB X-HIPRO 1058 loader crane
 
looks real cool awsome work again

Hemi1966 04-05-2020 08:58 AM

Re: HIAB X-HIPRO 1058 loader crane
 
I got the third boom done, inside that will come the telescopic extensions :)

https://i.postimg.cc/50MJTyXh/IMG-1336.jpg

https://i.postimg.cc/qqJTBFXQ/IMG-1338.jpg

https://i.postimg.cc/G2JRCRYH/IMG-1340.jpg

https://i.postimg.cc/Kj0y150b/IMG-1344.jpg

BlackCat 04-06-2020 06:16 PM

Re: HIAB X-HIPRO 1058 loader crane
 
Thank you Hemi !

There any reason why you have choose steel over aluminum ?
I'm about to buy a Chinese knock off lampert welding machine and milling aluminum is way more easier on my cnc router... I'm scare the welding of aluminum is going to be bad. Seen some picture of peoples successfully weld with aluminum with those kind of machine. (Picture here) But maybe you already try and was not happy with it ?

Otherwise nice work again :)

avel 04-06-2020 07:31 PM

Re: HIAB X-HIPRO 1058 loader crane
 
I saw on another forum that somebody used a teflon tape between the telescoping sections for lower friction when telescoping the sections.
I think it was one of the German forums.

Hemi1966 04-07-2020 09:56 AM

Re: HIAB X-HIPRO 1058 loader crane
 
Quote:

Originally Posted by BlackCat (Post 168649)
Thank you Hemi !

There any reason why you have choose steel over aluminum ?
I'm about to buy a Chinese knock off lampert welding machine and milling aluminum is way more easier on my cnc router... I'm scare the welding of aluminum is going to be bad. Seen some picture of peoples successfully weld with aluminum with those kind of machine. (Picture here) But maybe you already try and was not happy with it ?

Otherwise nice work again :)

Main reason I choose steel was just that welding. I have tried to weld aluminum, but I wasn't pleased with the results. But it could be just me not knowing what I was doing:(

Hemi1966 04-07-2020 10:04 AM

Re: HIAB X-HIPRO 1058 loader crane
 
Quote:

Originally Posted by avel (Post 168652)
I saw on another forum that somebody used a teflon tape between the telescoping sections for lower friction when telescoping the sections.
I think it was one of the German forums.

Thanks for the advice. Do you have any idea what kind of teflon tape it was, the only one I know is for sealing pipes, but that might not be the correct one.

frizzen 04-07-2020 04:54 PM

Re: HIAB X-HIPRO 1058 loader crane
 
That's looking incredibly wicked, can't wait to see this working!

I'd guess the Teflon tape used on sliding parts like that would be something like a Nitto Permacel p-421. It's a silicone adhesive backed smooth sheet of PTFE 5Mil thick. Most of what i've messed with is 1" wide.

-- edit
Ptfe = PolyTetraFluoroEthylene = Teflon is the brand name.
Let me know if you can't track any down...

avel 04-07-2020 07:24 PM

Re: HIAB X-HIPRO 1058 loader crane
 
I think I used the wrong word. I was using google translate to read the forum. But yes it was something with an adhesive side and a slippery/low friction side.


https://www.modelltruck.net/showthre...PK100002/page3

self-adhesive PTFE film. Post number 78 is where I see it first mentioned.

ptsg 04-08-2020 06:48 AM

Re: HIAB X-HIPRO 1058 loader crane
 
PTFE is the actual name of the material used in Teflon. Teflon is just a brand name that stuck.

Excellent work Hemi. It's coming out prefect!

Papy 04-08-2020 08:26 AM

Re: HIAB X-HIPRO 1058 loader crane
 
Quote:

Originally Posted by Hemi1966 (Post 168655)
Thanks for the advice. Do you have any idea what kind of teflon tape it was, the only one I know is for sealing pipes, but that might not be the correct one.

I used electrical shrink tube with success, but this is relatively thick and so requires to be considered at the design step...

Hemi1966 04-08-2020 10:10 AM

Re: HIAB X-HIPRO 1058 loader crane
 
Thanks guys, I will look into those :)

skeeter 04-09-2020 04:23 PM

Re: HIAB X-HIPRO 1058 loader crane
 
This will be a STRONG boom, once the crane is done!

Hemi1966 04-11-2020 09:00 AM

Re: HIAB X-HIPRO 1058 loader crane
 
I made the base for the column :)

https://i.postimg.cc/wxPTvFpX/IMG-1403.jpg

https://i.postimg.cc/g2bzyJrr/IMG-1404.jpg

https://i.postimg.cc/nz3r0tgg/IMG-1382.jpg

skeeter 04-12-2020 12:02 AM

Re: HIAB X-HIPRO 1058 loader crane
 
I admire your craftsmanship! If I were to try & scratch build a crane, like you've done I fear it wouldn't function very well.

Hemi1966 04-12-2020 11:34 AM

Re: HIAB X-HIPRO 1058 loader crane
 
Quote:

Originally Posted by skeeter (Post 168702)
I admire your craftsmanship! If I were to try & scratch build a crane, like you've done I fear it wouldn't function very well.

That could very well happen to this one too :eek:

I mostly worried about the extension cylinders (6 pcs) placement and the routing of their hoses.

Hemi1966 04-13-2020 06:00 AM

Re: HIAB X-HIPRO 1058 loader crane
 
This is the slew gear :)

https://i.postimg.cc/nzQBzCQ1/IMG-1412.jpg

https://i.postimg.cc/gjVhVQsX/IMG-1427.jpg

https://i.postimg.cc/D0ksbnr3/IMG-1424.jpg

Wibb 04-13-2020 11:53 AM

Re: HIAB X-HIPRO 1058 loader crane
 
Beautiful work!

Originalrob 04-13-2020 02:08 PM

Re: HIAB X-HIPRO 1058 loader crane
 
Amazing machine work !

Hemi1966 04-14-2020 06:51 AM

Re: HIAB X-HIPRO 1058 loader crane
 
I made some pins and pin keepers today.

https://i.postimg.cc/K8v5Lr6J/IMG-1432.jpg


All times are GMT -4. The time now is 04:04 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.