RC Truck and Construction - I need radio help please!

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- Electronics tech (https://www.rctruckandconstruction.com/forumdisplay.php?f=102)

- - I need radio help please! (https://www.rctruckandconstruction.com/showthread.php?t=9006)

Re: I need radio help please!

When I connect the receiver first and then turn the TRX on, the pump turns the wrong way.
When I first turn the TRX on with the throtle switch in the "on" position the display shows an switch error, when I put the switch in the off position then the message on the display disappears but when I connect the receiver and switch the throtle switch to the on position the pump runs in the wrong direction.

If I start the TRX with the throtle switch in the right (off) position and connect the RX the pump motor then turns in the right direction.
I think this is the correct startup procedure.

Erwin

Re: I need radio help please!

Quote:

Originally Posted by Buster (Post 123942)

I know it sounds dumb but is the white wire in the position closests to that of the main portion of the rx?