Re: Custom build of a Kenworth C509 as autralian roadtrain
I LOVE the attention to detail you've put into this so far. I'll anxiously be watching this build!
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi...
The new plate is cut out, glued and a bit sanded. An additional styrene piece is glued behind the middle part so that it is more stable. Now it must try completely to be able to finish the sanding and the cut out of the windows. http://up.picr.de/30673790lb.jpg http://up.picr.de/30673791ym.jpg http://up.picr.de/30673792mn.jpg http://up.picr.de/30673797lf.jpg http://up.picr.de/30673800sb.jpg http://up.picr.de/30673801dk.jpg http://up.picr.de/30673804pe.jpg http://up.picr.de/30673812jq.jpg http://up.picr.de/30673813pt.jpg |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi...
2 little steps. 1. I want to use smaller seals for the side windows, but I need something to give them the possibility to hold the window. Before http://up.picr.de/30693697yh.jpg http://up.picr.de/30693700qt.jpg After http://up.picr.de/30693755xb.jpg 2. I wanted to fix the grill at the bonnet. It's planned to fix the grill from behind. I drilled holes and threaded them. http://up.picr.de/30693694su.jpg After that small pieces if brass are solded into the outside of the holes and sanded until it's no longer seen. http://up.picr.de/30693695aj.jpg http://up.picr.de/30693687bn.jpg http://up.picr.de/30693690si.jpg http://up.picr.de/30693691yu.jpg http://up.picr.de/30693692ex.jpg Now the grill can be screwed to the bonnet. http://up.picr.de/30693685du.jpg http://up.picr.de/30693702gx.jpg http://up.picr.de/30693704uo.jpg http://up.picr.de/30693706aj.jpg http://up.picr.de/30693708yc.jpg |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Looking good Gizmow! Glad to see you back at this.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi, I've masde an inlay for the grill, now it's looking more complete.
http://up.picr.de/30758557bh.jpg |
Re: Custom build of a Kenworth C509 as autralian roadtrain
That's a sweet looking ride you've got going on there! I wish my build skills were talented enough to pull off something like that.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Nicely done! looks good.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Das ist prima!
Your english is much better than our deutche. The cab and sleeper are looking great! |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi...
many thanx for your reply... ;) While the sleeper is drying, I had a look at the lower parts of the fenders. They were mounted as one piece directly to the frame, but I want to have them split and mounted to the floor of the cabine, so that I can adjust them individually. I assume, the work brought the wanted result. http://up.picr.de/30815715ed.jpg http://up.picr.de/30815716ss.jpg http://up.picr.de/30815720vn.jpg http://up.picr.de/30815722fl.jpg Another advantage is, that I do have more space on the frame for the electronic components. http://up.picr.de/30815724mz.jpg |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Excellent work!!
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
nicely done
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi..
At the weekend I found some King Hauler parts and I decided to use the air filters for the C509, but they must be modified, because it must have air pipes with air entry parts (I don't know the englisch word) on the level of the roof of the cab. The pipes shown on the pictures are not the final part. I only have 8mm brass tubes and 6mm round full brass rods. So I created 2 pieces that will be soldered on both sides of the pipe. To get the holes centered in the rod, I took a piece of the 8mm pipe to get the drill centered. On one side I made a 3mm thread, on the other side a 4.5mm hole to place the "nose" of the air entries in. http://up.picr.de/30880184bl.jpg http://up.picr.de/30880185kp.jpg http://up.picr.de/30880190du.jpg After that I started to assemble the parts. http://up.picr.de/30880194qb.jpg http://up.picr.de/30880196gp.jpg http://up.picr.de/30880197qk.jpg http://up.picr.de/30880202hl.jpg Final position (please keep in mind, the pipes will be longer in the final version. http://up.picr.de/30880212aa.jpg http://up.picr.de/30880181xj.jpg http://up.picr.de/30880182vx.jpg Later I will remove the chrome, all "chrome parts" will get the same color. That's it for today. |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Job well done creating your own filters.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Nice work!! everything you have done is excellent!
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi...
Next step was the new bull bar. Here are some pictures of the build http://up.picr.de/31051785lg.jpg http://up.picr.de/31051789wr.jpg http://up.picr.de/31051791mi.jpg http://up.picr.de/31051793ac.jpg http://up.picr.de/31051779rn.jpg http://up.picr.de/31051795gh.jpg http://up.picr.de/31051797tz.jpg http://up.picr.de/31051798ym.jpg http://up.picr.de/31051800re.jpg http://up.picr.de/31051803bw.jpg http://up.picr.de/31051804ig.jpg http://up.picr.de/31051811ki.jpg http://up.picr.de/31051825zd.jpg http://up.picr.de/31051830uq.jpg http://up.picr.de/31051839tl.jpg http://up.picr.de/31051841yb.jpg http://up.picr.de/31051843ce.jpg http://up.picr.de/31051850ey.jpg http://up.picr.de/31051855oi.jpg And some video to show the functionality Clapping the bull bar |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Next steps are the driving mirrors
http://up.picr.de/31052191tg.jpg http://up.picr.de/31052192ni.jpg http://up.picr.de/31052194yz.jpg http://up.picr.de/31052195lx.jpg http://up.picr.de/31052197nb.jpg http://up.picr.de/31052198pp.jpg http://up.picr.de/31052200oy.jpg http://up.picr.de/31052182ed.jpg http://up.picr.de/31052183mi.jpg http://up.picr.de/31052184gd.jpg http://up.picr.de/31052186xr.jpg http://up.picr.de/31052187tg.jpg http://up.picr.de/31052188vc.jpg http://up.picr.de/31052190lf.jpg During the next days the right one will follow. |
Re: Custom build of a Kenworth C509 as autralian roadtrain
I LOVE how the mirror looks
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Quote:
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
AWESOME work! Keep posting!!
-Terry |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Quote:
I made it. The profiles are 8x5mm and the tubes are 5mm full metal brass. I only took some pictures fron the internet and built a bar as I want to have it, no brand name. |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Sorry for misunderstanding, I was asking about the white block with all the little holes in it that is lying under your bull bar assembly.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Quote:
It's a solder board were you can fix pieces to solder them. I bought it some years ago in a german online shop, but the shop doesn't exist anymore. I'll try to find it in another shop and will post the link if I find it. |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Here's the board on Evilbay
https://www.ebay.com/itm/Honeycomb-C...72.m2749.l2649 And here are the pins for the board https://www.ebay.com/itm/20-Pack-Of-...72.m2749.l2649 |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi...
A bit more progress. The second mirror is done. http://up.picr.de/31164574xk.jpg http://up.picr.de/31164651tc.jpg http://up.picr.de/31164653ao.jpg Also I tried to build some sidepipes. The gaps will be filled with a grid after painting them. http://up.picr.de/31164619pr.jpg http://up.picr.de/31164620vi.jpg http://up.picr.de/31164622ck.jpg http://up.picr.de/31164625gx.jpg http://up.picr.de/31164627na.jpg http://up.picr.de/31164628dr.jpg http://up.picr.de/31164618vt.jpg |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi...
Today I decided to allemble the truck with all parts I build so far. Just to see if everything can be assembled without blocking each other. It works, here are some pictures of the actual state. http://up.picr.de/31198513ap.jpg http://up.picr.de/31198514xh.jpg http://up.picr.de/31198517oa.jpg http://up.picr.de/31198518yo.jpg http://up.picr.de/31198522bk.jpg http://up.picr.de/31198523gk.jpg http://up.picr.de/31198524ew.jpg http://up.picr.de/31198529za.jpg http://up.picr.de/31198530ad.jpg |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Great work!
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Quote:
Cheers! Neil. |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Doodlebug, YVW
That thang looks amazing! I can't wait to see it finished. |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Your creativity is amazing, fantastic job so far.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi...
a bit of progress here... I started to build the rear fenders. I want to make a sort of Flexiguard system. http://up.picr.de/31333873ae.jpg http://up.picr.de/31333874pv.jpg http://up.picr.de/31333875tk.jpg While I'm waiting for a machine to fold the rear bumber I started to build the tanks. http://up.picr.de/31373529ts.jpg The parts for one tank. http://up.picr.de/31373530qt.jpg And after gluing them: Sanding, sanding, sanding... http://up.picr.de/31373532ng.jpg And that's the result (with 100er sanding paper) http://up.picr.de/31373537jd.jpg http://up.picr.de/31373538wb.jpg http://up.picr.de/31373539np.jpg http://up.picr.de/31373540zo.jpg |
Re: Custom build of a Kenworth C509 as autralian roadtrain
I LOVE how the rear fender is coming together! It's looking good.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Very Nice Build.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Love the brass work gismow, I need to make some mirrors for a build, bought the brass haven’t tackled it yet this gives me some ideas!
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Hi,
during the last days I worked on the fastening of the tanks. Here are some pictures of the actual state. http://up.picr.de/31477138wr.jpg http://up.picr.de/31477139sv.jpg http://up.picr.de/31477142jb.jpg |
Re: Custom build of a Kenworth C509 as autralian roadtrain
Looking better and better :)
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Great build
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Great work on the scratch built parts, will look good when its all done.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
SO COOL.
|
Re: Custom build of a Kenworth C509 as autralian roadtrain
Some very nice details
|
All times are GMT -4. The time now is 01:24 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.