Re: Another Tigercat...
Great build you have going on,like your choice of gearmotors,wiil surely do the job. Look forward to seeing it running:)
|
Re: Another Tigercat...
5 Attachment(s)
I have a few days off now so I hope to get back in the swing of things a bit. I got to play with my rotary table again today and managed to drill and thread some holes.
Thanks for lookin! |
Re: Another Tigercat...
Wow, nice work. Who needs fancy wheel motors when you can do that.
|
Re: Another Tigercat...
Quote:
i have a coupon to get these from harbor freight for $9.99 http://www.harborfreight.com/4-1-2-h...der-95578.html http://www.harborfreight.com/media/c...mage_12063.jpg |
Re: Another Tigercat...
5 Attachment(s)
It's been over a month but I spent a little time welding on my skidder today. I have some time off coming up so I hope to have more time to devote to this.
Reg |
Re: Another Tigercat...
looking good Reg!!!!
|
Re: Another Tigercat...
5 Attachment(s)
I've had a hard time getting back into this build but the weather was gross today so I used it as an excuse to stay in the shop. I finally managed to mount both the axles and their drive motors today. I had been mentally struggling with how I was going to mount the rear for quite a long time so I'm glad to have it in there and done! Now I can go back to working on the sheetmetal which is what I find to be the most fun! Before I started this 630D I wanted to build a Clark 880 but the cost of RC4WD's Demolisher 40 series tires (the only tire that is close in scale)scared me off. Now that I see the size of this one standing on it's own the 880 would have been massive! I kind of wish I had built it:eek:.
Reg |
Re: Another Tigercat...
Look's Great Reg!
P.S. send the rain my way, it's alittle dry here! Cheer's, Neil. |
Re: Another Tigercat...
WOW. great work. tig welding alum is great. i tried that not to long ago messed it up:eek:. its lookin good.
|
Re: Another Tigercat...
Nice job again Reg. Your skills are showing me up.
Ben |
Re: Another Tigercat...
5 Attachment(s)
Thanks guys
Hey Neil, It quit raining here for two days did you get some? I hope so because it's on its way back here for the weekend. Ben I don't think so... TIG is fun:D, but for me it can be very upsetting too:mad:! I'm still plugging away at this thing. I spent the last few days tinkering here and there on the back end making mounts for the arch and rams. Reg |
Re: Another Tigercat...
I think so Reg! Stellar work.
|
Re: Another Tigercat...
looking good Reg, drier than a (?????) here!
Cheer's, Neil. |
Re: Another Tigercat...
Quote:
Come on Ben you gotta give yourself more credit! At least your Cat works! This is far from finished and I'm already kinda wishin I'd started something else. The hydraulics are more complicated than I have patients for! 10 cylinders and 5 valves:eek:...help! Reg |
Re: Another Tigercat...
5 Attachment(s)
I started to make some pieces for the hydraulics but I really wasn't into it so I decided to finish the guarding in the arch today instead.
Ben, Did you use two cylinders in your grapple or just one? I took pictures of a 630B near my house months ago and it had one ram but I believe the 630D's have two. I'm not sure which way would be easier to make though as the second ram replaced a linkage that was in the older models. Thanks Reg |
Re: Another Tigercat...
Dam Reg, that looks great!
I used two cylinders in the grapple, it was tighter than dicks hat band! Took along time (days) to get it just right, shims, spacers, washer, ect. Ben |
Re: Another Tigercat...
Quote:
Thanks for the info and the compliment! Reg |
Re: Another Tigercat...
LoL! No rain yet, 2 brush fire's burning this weekend. Can cut the air with a knife!
Spent Sat. on a Rummley 30-60 Oilpull, yes it was hot! Sorry, no picture's. Look's like fun to build grill's and hydraulic cylinder's. Keep it up, looking forward to more update's! Cheer's, Neil. |
Re: Another Tigercat...
nice combo arch what are you going to use for your winch. i have to give you a big high 5 for all your tig work i know it's not eazy what kind of AL are you working with 3003for the sheet or 6061.
|
Re: Another Tigercat...
Quote:
Reg |
Re: Another Tigercat...
funny you should say that you are converting your bf30. that what i am doing right now too well my is a g0704 so just a littler smaller head.
you check got g0704.com hoss has every thing you need to know and then some. one tip i will give you don't buy chinese driver bords i know there only 50.00 but there not woth 1/2 that. i figger it would be cheaper to convert than to buy a DRO. not shere if i when down the right road yet lol but bean lost of fun. good luck |
Re: Another Tigercat...
That should turn out well! I've been waiting to get a quote on an optimum cnc kit from one of the canadian dealers. I'll see how crazy the price is and decide whether or not I save up and order it or just slowly piece one together. I like the idea of everything being matched and proven in the kit but I think that it will cost nearly twice as much so we'll see.
Reg |
Re: Another Tigercat...
Well I finally found some inspiration and started working on this again. I was really struggling with how to steer it but I figured out an easy way so here it goes! http://youtu.be/rAHZnO534VU http://youtu.be/TpoiG-i_IuY http://youtu.be/v73wry7NRf8 http://youtu.be/S9Er-TYFkM4
Thanks for looking Reg |
Re: Another Tigercat...
Didnt realise how big it was until i saw it pulling the fence post, that looks really good, it should pull even easier once you have the front end in the grab.
|
Re: Another Tigercat...
Looks great!
|
Re: Another Tigercat...
3 Attachment(s)
I've been workin on the hydraulic rams a little the last couple days but it's a slow process. I ordered fittings and quad rings the other day too and the shop phoned a while ago and said they were in so I guess I will pick them up tomorrow.
Thanks for the positive feedback! |
Re: Another Tigercat...
5 Attachment(s)
I was able to play a little on the mill this morning:D. I really haven't used it much yet so I figured the radiator grill on the skidder was a good project. For a while it looked like I was building an aluminum light switch cover:confused:... but I think it turned out OK... I really wish I could afford to do a CNC conversion! I've done a couple other minor things to it as well but nothing major so there's still a long ways to go.
Thanks for lookin! Reg |
Re: Another Tigercat...
C'mon Reg. Windows, paint, sound and woodchips....... faster. Man it looks great!!
|
Re: Another Tigercat...
5 Attachment(s)
Quote:
Anyway here is a small update.... This thing is a beast! It's lookin HUGE:eek: |
Re: Another Tigercat...
:D:D:D:D LOOK'S GREAT!:cool::cool::cool:
Cheer's, Neil. |
Re: Another Tigercat...
5 Attachment(s)
Still no wood chips or windows but about 12 hours in the last 2 days got me a blade...:cool:
I used the coke can for a size comparison:eek:! Me likey! Thanks for looking! Starting on the grapple tomorrow... Reg |
Re: Another Tigercat...
Looking good, looks powerful with those tires. Will you have servo moving the blade or hydraulic?
Maybee a coke can, can be our size comparisson between models, used that also after question about size. Dan |
Re: Another Tigercat...
You've got it going on. Looks better and better every time Reg. Just keep moving forward.
Ben |
Re: Another Tigercat...
Thanks guys:). I think I am going to use a servo to run the blade but it will be a 360 degree with a screw drive hidden in the front under the hood ahead of the axle. If that doesn't work out to have enough speed or power I will build hydraulic rams for it. I'm hoping to only use hydraulics for the grapple though if I can get away with it. I'm going to start on the grapple today but even without it this thing is getting BIG!
Thanks for looking, Reg |
Re: Another Tigercat...
nice reg, your metal work on the blade looks amazing, i just re-read the thread and saw your tires are nearly 8inches tall but watching the vid it steers so easily, do you have any pics of your steering setup?
|
Re: Another Tigercat...
Love the Aluminum work ,not always the easiest to work with and Tig welding isn't any better. Looks very good and would be very proud to own it!
|
Re: Another Tigercat...
4 Attachment(s)
Thanks! I'll take a picture of the steering set up soon to show you what I did. It's pretty simple really.
I got a little work done on the grapple but had to stop working on it so that I could load all my stuff into the car for the show in Port Alberni tomorrow! Thanks for lookin! |
Re: Another Tigercat...
I love this build. It's a huge model, and looks so good. I can't believe how nice it is turning out. But then again, maybe I can. All your other projects are simply awesome too. It's no wonder. Really great work on this Tigercat. I can't wait to see it finished.
|
Re: Another Tigercat...
Quote:
I haven't had any time to work on it lately as I have another model in the works but soon I hope! Reg |
Re: Another Tigercat...
looking great Reg.. awesome work again
|
All times are GMT -4. The time now is 01:49 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.