Re: Komatsu PC700 Excavator unboxing and review
 

hahaha I don't even know lol

Re: Komatsu PC700 Excavator unboxing and review
 

I just checked it's 110 mm x 60 mm x 30 mm not too big

Re: Komatsu PC700 Excavator unboxing and review
 

here's the link https://www.ebay.com/itm/112276897805

Re: Komatsu PC700 Excavator unboxing and review
 

This is smallest smoke generator I found. Functions on 6 volts and measures 85L x 55W x 50H mm.

http://www.ebay.com/itm/Rc-model-boa...yKWNm2eXX_hLXw

Re: Komatsu PC700 Excavator unboxing and review
 

oh nice I'm running 12v so I got the other one 30 mm tall and that is my biggest issue I'm not sure that will even fit... I'll just use it in my next one I buy if it doesn't fit

Re: Komatsu PC700 Excavator unboxing and review
 

Question Shawn which battery are you running in the Komatsu ?

Re: Komatsu PC700 Excavator unboxing and review
 

Uses Turnigy 14.8v 5000mah lipo from hobbyking. However the Pc700 comes with an adjustable step down regulator set to 12v in order to run the 2 fans, lights, etc...

https://hobbyking.com/en_us/turnigy-...___store=en_us

Re: Komatsu PC700 Excavator unboxing and review
 

The Tarr is pretty small as well.

http://www.rctankelectronics.com/sto...moke_Unit.html

Re: Komatsu PC700 Excavator unboxing and review
 

Nice thanks Benny going to save the link :)

Re: Komatsu PC700 Excavator unboxing and review
 

Haven't practiced in awhile so took advantage of Memorial Day. Digging in hard dirt. You can hear the bucket teeth scrapping.
https://youtu.be/SHWZU4D6bp4

Re: Komatsu PC700 Excavator unboxing and review
 

Dream setup right there! Have fun playing Shawn :cool:

Re: Komatsu PC700 Excavator unboxing and review
 

No photo shop.
https://youtu.be/nUIvuiKe8TA

http://i271.photobucket.com/albums/j...ps8py4pdnw.jpg
http://i271.photobucket.com/albums/j...ps44fxiaej.jpghttp://i271.photobucket.com/albums/j...psu1ojrypg.jpg
http://i271.photobucket.com/albums/j...pszajuxdqy.jpg
http://i271.photobucket.com/albums/j...psc4itcj7r.jpg

Re: Komatsu PC700 Excavator unboxing and review
 

Beautiful models and a rather big playground :)

Re: Komatsu PC700 Excavator unboxing and review
 

Just finished installing SMB servonaut sound module. I'm still finalizing the mixing rates to get the appropriate noise at the right time. It's been a challenge.
https://youtu.be/_OEh9n2gQKg

Re: Komatsu PC700 Excavator unboxing and review
 

Kershaw Designs MK3 8000 mAh 14.8V LiPo Pack
A LiPo pack pulled in just for those that want a ridiculous amount of 8S power for large 1/5 scale brushless applications.

70C Constant These are the batteries I run in my Vario excavator. Ed
4S
62*41*169mm Align
balancing plug

Re: Komatsu PC700 Excavator unboxing and review
 

Figured out how to post with Flickr thanks to member Frizzen.
This was my first time seeing RC4wd products in person (besides all the youtube videos). I never realized how much smaller rc4wd excavators were compared to the PC700.
So I took several photos from different angles just to get an idea of the size differences.
https://farm5.staticflickr.com/4572/...e31b1c39_c.jpg
https://farm5.staticflickr.com/4575/...5edeec01_c.jpg
https://farm5.staticflickr.com/4523/...e072e934_c.jpg
https://farm5.staticflickr.com/4532/...d8e99e82_c.jpg
https://farm5.staticflickr.com/4581/...67f86357_c.jpg
https://farm5.staticflickr.com/4572/...ee36818b_c.jpg
https://farm5.staticflickr.com/4549/...5f6fbe37_c.jpg
https://farm5.staticflickr.com/4579/...9ca8c0bc_c.jpg
https://farm5.staticflickr.com/4537/...2c09df3b_c.jpg

Re: Komatsu PC700 Excavator unboxing and review
 

RC4wd asked me if I can put a towel so it wont scratch the new trailer with the 91lbs PC700 :) The trailer is built very strong. It was perfect for the PC700.
https://farm5.staticflickr.com/4560/...3f009deb_c.jpg
https://farm5.staticflickr.com/4586/...1c9e065e_c.jpg
https://farm5.staticflickr.com/4516/...41ce867f_c.jpg
https://farm5.staticflickr.com/4565/...44722e59_c.jpg
https://farm5.staticflickr.com/4527/...86be4afc_c.jpg
https://farm5.staticflickr.com/4545/...a9e5ee09_c.jpg
https://farm5.staticflickr.com/4567/...de3d0c78_c.jpg
https://farm5.staticflickr.com/4524/...c9e2dba7_c.jpg

I should have narrowed the trailer for the CAT740
https://farm5.staticflickr.com/4558/...4cb16f73_c.jpg
https://farm5.staticflickr.com/4565/...849952e6_c.jpg

Re: Komatsu PC700 Excavator unboxing and review
 

And an added bonus!! Enjoy! Happy thanksgiving.
https://farm5.staticflickr.com/4524/...f4590b78_c.jpg
https://farm5.staticflickr.com/4529/...cbc81402_c.jpg
https://farm5.staticflickr.com/4563/...1909a102_c.jpg
https://farm5.staticflickr.com/4539/...e8479c59_c.jpg
https://farm5.staticflickr.com/4559/...cbe47c5c_c.jpg
https://farm5.staticflickr.com/4539/...87581308_c.jpg
https://farm5.staticflickr.com/4543/...709989a6_c.jpg
https://farm5.staticflickr.com/4572/...42d1a94b_c.jpg

Re: Komatsu PC700 Excavator unboxing and review
 

Great shots Shawn! :cool: The PC700 excavator seems to be the only excavator capable of loading RC4WD mining truck withouth the need of being elevated higher up.

Re: Komatsu PC700 Excavator unboxing and review
 

Well, no room for a PC700 in the basement ;)

Re: Komatsu PC700 Excavator unboxing and review
 

I can’t help myself looking at the last set of pictures, the legs on that broad in white :eek:

Re: Komatsu PC700 Excavator unboxing and review
 

I was busy looking at that badonk a donk in the ball cap to her LHS (Left Hand Side)

Re: Komatsu PC700 Excavator unboxing and review
 

The one that has the LONG hair past her waist.

Re: Komatsu PC700 Excavator unboxing and review
 

Thanks! Yes that's safe to say.:D

Re: Komatsu PC700 Excavator unboxing and review
 

That ripper looks like it could be a lethal weapon.:eek:

Re: Komatsu PC700 Excavator unboxing and review
 

Some minor scale updates to the PC700.
But first a little history. My only feedback to The Mother RC Construction was the rather unappealing rectangular shape engine hood cover. Paolo explained the reason for the rectangular shape was the result of making everything out of steel. I asked him if he can make an option with only the engine hood cover printed in 3D plastic. A month later he posted on shapeways :) That's customer service at its finest. Now for some pictures:
I had a local metal shop laser cut the new steel plate to match the 3d printed engine hood's curves. I'm keeping the original as backup.

I also plan on adding hinges so I can open up the engine hood like the 1:1 scale.

https://farm5.staticflickr.com/4592/...5772391f_c.jpg
https://farm5.staticflickr.com/4683/...b11c2265_c.jpg
https://farm5.staticflickr.com/4730/...118ea6fc_c.jpg
https://farm5.staticflickr.com/4682/...3a82c01a_c.jpg
https://farm5.staticflickr.com/4688/...25032a39_c.jpg
https://farm5.staticflickr.com/4639/...c9639d76_c.jpg
https://farm5.staticflickr.com/4600/...aefa82d1_c.jpg
https://farm5.staticflickr.com/4732/...f91d7889_c.jpg
https://farm5.staticflickr.com/4596/...cb21d9a4_c.jpg
https://farm5.staticflickr.com/4596/...40f52c63_c.jpg
https://farm5.staticflickr.com/4733/...484968e3_c.jpg
https://farm5.staticflickr.com/4688/...9af702cb_c.jpg
https://farm5.staticflickr.com/4689/...0ebd3d8a_c.jpg

Re: Komatsu PC700 Excavator unboxing and review
 

I see now what you meant about the original being a bit too square. Once you get that painted and the exhaust on, it will look true to scale.

Re: Komatsu PC700 Excavator unboxing and review
 

Great customer service right there! Keep us posted how the new hood come’s out. Love your excavator :cool:

Re: Komatsu PC700 Excavator unboxing and review
 

Shawn, great pictures of the equipment and show area. Do you have any other pictures of the trailer and the mining truck?

What is the max load on that trailer? And, how did the mining truck perform?

Thank you for sharing the pictures of the show.

Jim

Re: Komatsu PC700 Excavator unboxing and review
 

Hows the paint on the new hood coming along ?

Re: Komatsu PC700 Excavator unboxing and review
 

I picked up the air compressor and paint gun from my parents house yesterday. I'll have to practice on something first as this will be my first time using a paint gun.
I have other pictures of the giant dump truck and video. PM me your email address and I'll send some out. The truck definanatly has a wow factor. But I can't speak for its performance or drivetrain. We did convince an adult female to sit in the back and it drove around with no problems. But there is a YouTube video of this guy who's had some serious issues with breaking gears in the transmission. You might want to look there and ask him.

Re: Komatsu PC700 Excavator unboxing and review
 

Shawn, I sent you a pm for the pictures and video of this show.

Did you have the link to the YouTube for the video of the Mining truck?

Thank you,

Jim

Re: Komatsu PC700 Excavator unboxing and review
 

Re: Komatsu PC700 Excavator unboxing and review
 

No issues with a King Hauler pulling a 91 pound excavator?

Re: Komatsu PC700 Excavator unboxing and review
 

I don't think so. Maybe Riley can fill in since it was his KH.
Here is a video i just uploaded. https://youtu.be/tDipd1S7nmU

Re: Komatsu PC700 Excavator unboxing and review
 

I’ve seen a king hauler pull 160lbs on a Rc4wd lowboy without issue. You just need a PMD 4:1 reducer, metal fifth wheel plate, and strong/stiffer rear suspension. Oh ya and hard foam tire inserts :cool:

Re: Komatsu PC700 Excavator unboxing and review
 

It looks to me, like the speed controller ramps up too fast. If it has a brake function, turn it off. Or a more programmable radio?
Cheers, Neil.

Re: Komatsu PC700 Excavator unboxing and review
 

That's a cool looking truck.

Some things to try for eating gearmotors
Is there a dragbrake on the esc? Set it off or low
Does your tx have exponential? Change throttle curves to softer around the deadband
Punch control? Set it softer
Brakes? Set off or really low

Re: Komatsu PC700 Excavator unboxing and review
 

Hi all,

It's been a while since I posted on this forum, I have been away from RC construction machine for a few years now.
I'd like to get back on track and I really like this model, the 70Tons excavator is my favorite target and the price looks like it's a great value.

Im more interested by a reliable machine with lots of diggin power than cosmetics.

I've contacted Paolo, which seems like a very professional guy with amazing craftmanship, but I'd like to hear back from an actual user of this model.
there isnt much videos on the internet and very few threads in german forums AFAIK, so it's difficult for me to get an idea of this model reliability.

So Shawn, seeing that you've been using this model for a few months now I'd like to get feedback from you if you dont mind, could be in MP if you prefer.

Would you recommend this model ? any hint would be appreciated really.
Thanks,

Dimitri.

Re: Komatsu PC700 Excavator unboxing and review
 

Hi dimitri. Thanks to apreciate my work. I work a lot for make this model perfect. We work for the detail and performance. We fix some little problem with some professional thing. We make our gearbox with full metal gears and now we are around at 200kgcm force. Now we have massive torque and power. We are on the way to send another model to usa. Our facebook page have a lot of pictures and video. In any case if you need to see something in particular please let me know and contact me. Thanks and follow us. Paolo