Re: Travis B's Track Loader gets a paint job
 

No worries Joe, glad I could point you in a useful direction. I didn't get the self center stick and have been able to work around that so far. I'm going to have to change that soon...

There are two receivers that don't work with the MFU's though. The 8 channel receiver does thought (from another thread on here... can't seem to remember which one though... Aseejr??? I think...)

So now that we have completely hijacked this thread... Nice loader Travis! And great Job Izzy!

Re: Travis B's Track Loader gets a paint job
 

You either have to order it that way or send it to Spektrum (Horizon Hobby) they will not sell you the stuff to do it but they will do it for free all of mine were ordered that way and regardless of what a local hobby shop tells you the radio can be ordered that way

Travis

Re: Travis B's Track Loader gets a paint job
 

Only the AR6100B or the original AR6100 and the 7 and 8 ch receivers will work with the MFU. The AR6000,BR6000,AR6110, and AR6110e will not work with the MFU by it's self but any of the two in combination just not two of the same will work if you split the leads from the MFU between them. At $50 a piece you might as well by a 7 or 8 ch receiver for $100 and only have to use one receiver if you can't get an AR6100.

Travis

Re: Travis B's Track Loader gets a paint job
 

Joe- no problem - not takin it bad;) Travis had mentioned the radiator and immediately i wanted to re-machine the rear counter weight and make the rear grill unit functional - but he didn't want something so complicated and such..... I thought it would be really cool though .... amybe I cna talk him in to it for the next go around.

Any body tried that new radiator system by Rossi??? i see it advertised in the re mag but no reviews yet.......they look like Griffin radiators to me.....:rolleyes:

Re: Travis B's Track Loader gets a paint job
 

That would be slick Izzy! Which way would you do the airflow?

Rossi? got a link?

Re: Travis B's Track Loader gets a paint job
 

That is a great paint job and a nice loader, for sure. I didn't really realize the size of the model until there was a picture with a life-sized human hand and the load together. :D I had the idea that this track loader was a bit smaller model, but it doesn't really look that small anymore. Great thread and thanks for sharing.

Re: Travis B's Track Loader gets a paint job
 

www.grossiengines.com

http://i262.photobucket.com/albums/i...r/af93e258.jpg

Re: Travis B's Track Loader gets a paint job
 

ok lol nice he he he another idea lol