Re: LilGiantsConstrCo
Carp, I have two 4206's, one has 3 valve hyds, the other has none.
Tom, stick time since 2002, indeed all good fun. :cool: |
Re: LilGiantsConstrCo
I saw a bucket, i was just suprised to see an actual seat down there.
Wow, i didn't realize that's been going on since '02 |
Re: LilGiantsConstrCo
My seat is "up there", that's the back of my shop. ;)
I got my 1st my hydraulic construction model, Liebherr 922 excavator, from Stahl/Leimbach summer of 2001, finished building it Feb 2002. Basement enlargement project started winter of 04 - 05. |
Re: LilGiantsConstrCo
Been working on a new B50 with a pup this winter. I went with brushed motors in this one, it'll run a little quicker than the old one with brushless.
https://s17.postimg.cc/alycbvq73/001.jpg https://s17.postimg.cc/rmh8kky3j/002.jpg https://s17.postimg.cc/phwvjk9cf/003.jpg https://s17.postimg.cc/hcetle5nz/004.jpg https://s17.postimg.cc/tr1llof5r/005.jpg https://s17.postimg.cc/kj9d4znj3/013.jpg https://s17.postimg.cc/jgz6mhufz/014.jpg https://s17.postimg.cc/jgz6mgzkv/015.jpg https://s17.postimg.cc/9wfjzl2j3/016.jpg https://s17.postimg.cc/lyaxtrm27/001.jpg https://s17.postimg.cc/9wfjzmkjj/002.jpg https://s17.postimg.cc/5ajfra6q7/003.jpg The old B50 needed some attention a few weeks ago, had to pull the pump out to tighten the belt. https://s17.postimg.cc/v636aenyn/010.jpg |
Re: LilGiantsConstrCo
Another B50! :eek: Love the new pup setup, going to be a badass dumper :cool:
|
Re: LilGiantsConstrCo
Looks real good Joe nice welds. Ed
|
Re: LilGiantsConstrCo
looks awsome Joe. your fleet of trucks will beable to move alot of material.
|
Re: LilGiantsConstrCo
Thanks for posting the pics of the new truck. I’m sure this one will live a life of good use . And nice work on the hitch!!
|
Re: LilGiantsConstrCo
Wow you built those 1.5 B50's fast!! Does it come painted? Looking forward to this beast hauling dirt.
|
Re: LilGiantsConstrCo
just currious if you put all the dumper trucks in a line how many feet long would it be lol :D
|
Re: LilGiantsConstrCo
Fast?! What are you being funny? :thinking: :D :p I'm not fast, I got these 3rd week of July, spent a week degreasing all metal parts & painting so paint could cure fully while I do my harvest... threw my back out the next week & couldn't do much anything for 8days, leaned on my neighbor to load out 5B's for me & do some desicating on peas, got through harvest ok by myself, but my lower back issues have bugged me all winter, couple hrs in the shop a day hunched over working on projects is all I can handle... turning 50 this yr, feel like 80 most days. :(
Anyways, just about done with this adt & pup :) I made a valve divider block from brass for the pup https://s13.postimg.cc/okaooxsqv/001.jpg https://s13.postimg./xglgsbthj/002.jpg https://s13.postimg.cc/41fsjfrjr/003.jpg This dump cyl was on the trk, right side... the flexible hose going to the "T" I think I made it a bit too short, box going up/down - changing angles tugging a bit on this fitting broke it loose from the tube. Pipe goes up to top of tube & broke loose from that soldered joint... buffed the paint off, resolder, repaint, put it on pup after dinner today. https://s13.postimg.cc/ebi7il9on/004.jpg https://s13.postimg.cc/fdse145cn/005.jpg Got the box on the pup, put oil to the cyls https://s13.postimg.cc/shxydvhzr/010.jpg This is where the connection is for the pup hyds https://s13.postimg.cc/njafzc6h3/013.jpg Got a leak, hoping I just over tightened the fitting & crushed the seal too much... put on a new fitting with some thread seal... give a couple hrs to set & try it again. https://s13.postimg.cc/6irjqnlpz/012.jpg Made up some exhaust pipes from 5/16 Plastruct tube for this adt & the others https://s13.postimg.cc/z8efncuvr/014.jpg This air cleaner is 3D printed, used an 8mm magnet to hold it place for pictures & filming, leave it off during regular use so it don't get so dirty. https://s13.postimg.cc/8akillfdj/015.jpg https://s13.postimg.cc/53pz1z2nb/016.jpg And I'm motivated to get busy putting this WA500 wheel loader together next, it's only 4yrs next month that I've had it :eek: :D :p ...been using it for spare parts on occasion for other models that needed repairs, still missing a couple parts that'll hopefully show up next month. https://s13.postimg.cc/dyqtcimav/017.jpg Degrease the cyls today & paint them yellow https://s13.postimg.cc/6irjqq6bb/018.jpg The drive belt on my lathe is toast :( ...having a hard time trying to find one locally. https://s13.postimg.cc/yivnavzg7/008.jpg I was looking on https://www.mcmaster.com/#drive-belts/=1booul2 (I see the link won't go directly to page I was looking at; it's the T5 series timing belt) My operators manual gave the dimensions 124 x 1.5 x 15 which is metric for teeth - depth - width When I measure the length I get 584mm & pitch is 5mm Gonna be one of these 3 belts :thinking: ... would the difference in lengths compared to # of teeth be b/c of belt thickness? :confused: T5-575-16 575 115 5 Urethane Gray -13° to 176° 1679K518 9.10 T5-610-16 610 122 5 Urethane Gray -13° to 176° 1679K545 9.51 T5-630-16 630 126 5 Urethane Gray -13° to 176° 1679K522 9.51 |
Re: LilGiantsConstrCo
Got er done... well except for the decals & a couple of other bitty parts that'll show up in a few months.
https://s13.postimg./iukugqy1z/003.jpg https://s13.postimg.cc/b1u6ota3b/004.jpg https://s13.postimg.cc/636oac3qf/005.jpg https://s13.postimg.cc/faywr0vd3/006.jpg https://s13.postimg.cc/5qfa42t5j/008.jpg Missing the fuel cap & fuel drain plug https://s13.postimg.cc/rplorax53/010.jpg https://s13.postimg.cc/87r1bcshj/012.jpg https://s13.postimg.cc/yg260qzqf/013.jpg https://s13.postimg.cc/jk3mt5w1j/014.jpg Off to get the 1st load https://s13.postimg.cc/cgvrdk61j/015.jpg Start painting the cab on the old B50 shortly... more than 50cy hauled in the last 3yrs https://s13.postimg.cc/5dnvxyvh3/017.jpg https://s13.postimg.cc/oir57pmzr/018.jpg https://s13.postimg.cc/rplordhqf/019.jpg https://s13.postimg.cc/ystk70i13/020.jpg https://s13.postimg.cc/iukugul87/021.jpg Trying to pull the steep grade with pup in tow, the rims on the tandem axle were slipping bad in the tires, I had to pull hard by hand to get the truck up the hill... I really hate gluing tires... not sure what this gasket maker goo will do, smeared it on today, see what it's like tomorrow. :thinking: https://s13.postimg.cc/ey7ikwpyv/024.jpg https://s13.postimg.cc/7uzn59hyf/025.jpg https://s13.postimg.cc/3ymb9cp9z/022.jpg Broomed off the ramp, nearly 5 gallon of clay powder/dust, very slippery. Road is wearing down bad! https://s13.postimg.cc/z5kyd7fqf/026.jpg https://s13.postimg.cc/3ymb9c24n/027.jpg Soaked the roadway with water, sprinkle on the fines, soaked it some more, rebuild the surface to make it smooth. Lay down some asphalt to protect the surface. ;) https://s13.postimg.cc/8kifhp33b/028.jpg The fines pile grew a lot in the last week! https://s13.postimg.cc/uwg8b2uhj/029.jpg |
Re: LilGiantsConstrCo
Now that is a lot of goodness, and hard work done. Really enjoy watching the progress a lot, and with new machines on the plant new challenges shows up. Heavy traffic can put some roads on a test for sure. hope you can adjust for a smooth haul road and get it where it needs to go. I could not resist to mess with one of your pictures.........a drone pix of your site....looks like so 1/1
Hope you don't mind i did this.......[IMG]https://farm5.staticflickr.com/4708/...be2693c3_b.jpgGianr by Bo Wallen, on Flickr[/IMG] Looking forward to vids....crunch crunch. |
Re: LilGiantsConstrCo
Really nice work on the new truck Joe. I was curious how the dumping would work with the pup but now I see.
|
Re: LilGiantsConstrCo
Thanks for the photo's Joe
You are getting some building done this winter... I would guess you powered up the trailer as well ? greg |
Re: LilGiantsConstrCo
Did you just zoom the pic Bo? It does look moreso 1:1 :cool:
Thanx Tom. The dump area is almost too small for this combo. I do have a 2x25 Sabertooth in the trk & a power wire coming from the cab Greg to put power to the axles on the pup, don't really want to b/c cornering makes it act weird... I have some hubs with one-way roller clutches that I made up for the 8wd 4206 cross dump, but took them off b/c I discovered I sometimes needed 8wd in both directions with that rig. I can't make that alteration till I get my lathe working again... ordered belts from McMaster yesterday... the slow bus through customs. :rolleyes: |
Re: LilGiantsConstrCo
Hey Joe.
I turned the pic. counterclockwise a bit to most of the revealing wall was gone, and cut out the footprints from the Giant..........lol Would love a similar pic. with your New awesome haul truck in there also......keep snapping picture plz. |
Re: LilGiantsConstrCo
Came out great Joe looks awesome :cool: A serious dumper right there.
|
Re: LilGiantsConstrCo
Thanx Brandon, I like it too... get this rim slippage problem solved, then hammer down!
A vid showing the 963 leveling the fines pile, had to reload the vid b/c the original kept pausing for reasons I do not know :thinking: https://www.youtube.com/watch?v=q_xf_I581ug |
Re: LilGiantsConstrCo
Crunch Crunch. The reload works good, So does the dozer.......and i said it before.....Excavator Operator Extraordinaire...... Now i gotta say Dozer Operator Extraordinaire.......Very nice work !
|
All times are GMT -4. The time now is 06:46 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.