Bruder Liebherr 574 Conversion
Hi guys!
Just wanted to introduce myself, and say I have been lurking around this site for the last month and have been soaking up all the amazing information. I thought I would post up my Bruder Loader conversion.:) So the parts required for this conversion are: Tamiya Semi axles Tamiya CR-01 transmission 1x Hitec Hi - torque mg servos Set of Tamiya Hummer rims Set of axial 1.9" tires 3x Linear servos or Linear actuators (I am using Ferigelli Linear servos for this build) A bucket load of Tamiya Hi-lift hardware Step 1: Dismantling http://i1260.photobucket.com/albums/...i/P1012309.jpg |
Re: Bruder Liebherr 574 Conversion
Step 2: Figure out how to connect the linear actuators to make the boom and bucket work properly. I started by cutting and drilling a hole at the bottom of the boom chassis.
http://i1260.photobucket.com/albums/...i/P1012315.jpg The cut was required to gain the proper clearance and the hole was drilled to push a brass rod through to connect one end of the actuators http://i1260.photobucket.com/albums/...i/P1012411.jpg From there I drilled a hole through the booms to connect the other end of the actuators http://i1260.photobucket.com/albums/...i/P1012409.jpg http://i1260.photobucket.com/albums/...i/P1012410.jpg The bucket ram was easy to install, I just drilled a hole through the existing mounts http://i1260.photobucket.com/albums/...i/P1012404.jpg |
Re: Bruder Liebherr 574 Conversion
The next step in the process was figuring out how to make the articulated portion of the loader work. As easy as the photos make it seem I actually spent a lot of time trying to figure out what would give me full travel and yet be out of the way and not require to much hacking of the body/chassis.
http://i1260.photobucket.com/albums/...i/P1012431.jpg Now came the tricky part, how to get power to the wheels. I am using Tamiya semi axles as they are a exact match width wise as the original axles. This was a serious multi step process with a lot of swearing and head scratching. Step 1: Mask and cut clearances for axle, the point of no return! Before http://i1260.photobucket.com/albums/...i/P1012377.jpg After http://i1260.photobucket.com/albums/...i/P1012382.jpg Step 2: Make brackets to hold the axles to the chassis http://i1260.photobucket.com/albums/...i/P1012379.jpg Step 3: Lock the diffs-a nifty little trick-insert a 4th bevel gear and viola she is locked http://i1260.photobucket.com/albums/...i/P1012386.jpg Step 4: Paint axles and brackets and assemble http://i1260.photobucket.com/albums/...i/P1012388.jpg Step 5: Mount axle to chassis http://i1260.photobucket.com/albums/...i/P1012391.jpg http://i1260.photobucket.com/albums/...i/P1012390.jpg |
Re: Bruder Liebherr 574 Conversion
Once I got the rear axle in I worked on the motor and transmission. I made these aluminum motor mounts
http://i1260.photobucket.com/albums/...i/P1012393.jpg With motor mounted http://i1260.photobucket.com/albums/...i/P1012395.jpg http://i1260.photobucket.com/albums/...i/P1012397.jpg From there I moved to the front axle, I had to make alot of cuts to get it to fit but she did! http://i1260.photobucket.com/albums/...i/P1012416.jpg http://i1260.photobucket.com/albums/...i/P1012418.jpg Made some mounts for the axle and installed them http://i1260.photobucket.com/albums/...i/P1012420.jpg http://i1260.photobucket.com/albums/...i/P1012423.jpg From there I made a custom drive shaft and connected it to the axles http://i1260.photobucket.com/albums/...i/P1012424.jpg http://i1260.photobucket.com/albums/...i/P1012426.jpg From there I put it all back together sans cab http://i1260.photobucket.com/albums/...i/P1012434.jpg |
Re: Bruder Liebherr 574 Conversion
Here is a quick video of the test run...still need to get use to the controls and get a smoother speed controller...but she is powerful.
http://www.youtube.com/watch?feature...&v=famTtbUEBJ4 |
Re: Bruder Liebherr 574 Conversion
Very nice done, looks very powerful and good traction! Maybe need for alu or steel arms and linkage? :) Looks a little wobbly! :) Well done!
|
Re: Bruder Liebherr 574 Conversion
Oh, one of the best bruder conversions I've seen. You did very great job on hiding the servos making everything look scale!
Now take off all orange stickers, make better wheel hubs and finish the cabin and we have a very cool model! Keep it up! |
Re: Bruder Liebherr 574 Conversion
Here are some final finished shots of the loader.
http://i1260.photobucket.com/albums/...i/P1012440.jpg http://i1260.photobucket.com/albums/...i/P1012438.jpg http://i1260.photobucket.com/albums/...i/P1012436.jpg I will try to get some video of it in the next few days. I actually built a 1/16th scale short course track in my back yard with this, the excavator and dozer. |
Re: Bruder Liebherr 574 Conversion
Very nice loader conversion ,looks like it works great ,look forward to some more vids :D
|
Re: Bruder Liebherr 574 Conversion
Looks really good!! Looks like it works well. I love the conversions people do. One of these days ill start mine.
|
Re: Bruder Liebherr 574 Conversion
Very nice conversion. I like the clean look.
|
Re: Bruder Liebherr 574 Conversion
Very nice. Do you have the specifications of the linear servoes you used?
|
Re: Bruder Liebherr 574 Conversion
great conversion! dying to see more pics and video's of it. I have one of these at home too, maybe I should also convert it.
|
Re: Bruder Liebherr 574 Conversion
very sweet! you did a great job! i like the linear servos looks like they were made for it!
|
Re: Bruder Liebherr 574 Conversion
I see that in one pic you have a single 645 servo and in another you have two servos. What servos did you end up using for the steering?
Reg |
Re: Bruder Liebherr 574 Conversion
looking good you got it done up nice all i ever did was get my 574 taken apart lol.
|
Re: Bruder Liebherr 574 Conversion
lookin great but I would have converted a ertl case 1/16 scale pay loader model looks so much more american and scale
|
Re: Bruder Liebherr 574 Conversion
awesome! i have one coming in the mail and this thread is gonna help me out alot!
|
Re: Bruder Liebherr 574 Conversion
How are the Linear actuators working out for you on the loader ..
|
Re: Bruder Liebherr 574 Conversion
Hi there,
Iam going to do the same. Can you please, please tell me what Linear actuators you used?? Thanks Brian |
Re: Bruder Liebherr 574 Conversion
You is a great,especially for the differentially locked!!!!!!.
|
Re: Bruder Liebherr 574 Conversion
Can anyone please tell me where to purchase the linear actuators used in this conversion? What make and model?
Thanks |
All times are GMT -4. The time now is 06:08 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.