reinke 48'x102 drop deck
 

I worked a deal awhile ago with Reeve to build him a drop deck like a 1:1 he has . Now if you don;t know me by now , I like to make things as close to the real thing as possible :eek: :confused: since my mill predates cad/cam I'm basically programing the long way (G code ) :( (at least for frames ) I had hopes to mill the frame rails with the suspension hangers , BUT with the jumping on the x it just not gona happen :( I was all set to run them but I can't get the end mills I need today :mad: and editing this thing is a PITA but here it is on paper I hope to have some frames in the next week or 2 :confused: as the 1:1 life has me busy again :(

http://i830.photobucket.com/albums/z...r/PIC_1251.jpg

A link https://rdss.reinke.com/public/drop_deck.html

Re: reinke 48'x102 drop deck
 

:cool: I will be following this build:)

As for the jumping on the X axis, what are your steps set to, and what operating system is the mill using?

Re: reinke 48'x102 drop deck
 

soon to get hit with a BFH :eek: pre dates PC Centurion IV by milltronics no longer supported :mad: there's more then that wrong with it . I think this POS is getting yanked out by next weekend hopefully when the newer 1 comes :confused: and just figure how to do it with the smaller table :confused: this deffinately needs a new control any one need a boat anchor !! Cheap!!!!!:eek:

Re: reinke 48'x102 drop deck
 

LOL you mean a one time use boat anchor.

There are documented problems with this contoler atfter conversion to single phase. The inverter is not able to handle the change well, causes jumpping and HS travel when you try to use grid function.

Try swapping Z and X cards and see if the problem occures on the Z. This should help isoulate the problem.

Sometimes the floresent lighting also interfers with the siginal.

These are just some of the results found.

Personally I would put a xylotech drive on it. I am running this on my router with 406 inoz steepers at 1/8 steps with good results.

Re: reinke 48'x102 drop deck
 

I can run it in jog with no problems It just starts to f up in hand wheel mod or running programs It can't even run a simple program out of the manual :eek: all was going OK till after lunch I guess it wanted a lunch break to :eek: It's coming out of the shop by this week end making room for the VMC and lathe I just had it with it my uncle said He sees this all the time people buy these 20+ year old machines thinking they got a deal . 10 K will get me a new control from mm and last anther 20 + but I don't have the time to refit right now and I want to get these things done for these ppl .

Re: reinke 48'x102 drop deck
 

As you all know I got a newer mill AND at long last I'm getting this frame cut out :rolleyes: It's nice to work in you sleep for a change :D :p well the machine does :rolleyes:

OK inside profile is done on phase 1 next stringer holes and outside profile tomorrow then they're ready to be flipped over to do the 2nd phase :eek: of course I threw some parts for my mack M75SX build in the process :rolleyes:
from the set up :

http://i830.photobucket.com/albums/z...r/PIC_1349.jpg

http://i830.photobucket.com/albums/z...r/PIC_1351.jpg

http://i830.photobucket.com/albums/z...r/PIC_1355.jpg

more tomorrow I hope :rolleyes:
thanks for looking

Re: reinke 48'x102 drop deck
 

well a little more then a piece of alm. plate in the mill :rolleyes:

http://i830.photobucket.com/albums/z...r/PIC_1357.jpg

http://i830.photobucket.com/albums/z...r/PIC_1362.jpg

http://i830.photobucket.com/albums/z...r/PIC_1363.jpg


thanks for looking

Re: reinke 48'x102 drop deck
 

Wow those rails came out great. Cant wait for the next update.

Re: reinke 48'x102 drop deck
 

Those are lookin good Steve.. Careful look what happened to Travis when he made ONE trailer.. Some of us others might want one of them..:D

~Mike~

Re: reinke 48'x102 drop deck
 

Quality Steve:D Those turned out like a champ, can't wait to see more! > Marty<

Re: reinke 48'x102 drop deck
 

thank you Mike , well if that happens then it does :eek:

thank you , Marty


A little hair pulling again today :mad: but all in all the end result put this :D on my face .

http://i830.photobucket.com/albums/z...r/PIC_1374.jpg

more later

Re: reinke 48'x102 drop deck
 

Looks good Steve its nice to see your putting your new mill to work!

Brian

Re: reinke 48'x102 drop deck
 

Re: reinke 48'x102 drop deck
 

gonna need one of those for the fleet

Re: reinke 48'x102 drop deck
 

thanks Paul ;) I know It's been awhile :o I'm starting to pick back up on things . I'm getting closer to welding up the stringers . made a new tail piece with the right kind of light holes ( need to ream them a little for a perfect fit ) . suspension/axles just about finished (air bags yet )

http://i830.photobucket.com/albums/z...r/PIC_1613.jpg

http://i830.photobucket.com/albums/z...r/PIC_1612.jpg

Re: reinke 48'x102 drop deck
 

LOOKIN SWEET!!!

Re: reinke 48'x102 drop deck
 

Nice attention to detail Steve!

Brian

Re: reinke 48'x102 drop deck
 

Steve, the trailer is looking great as usual. I had almost forgotten this thread. I'm glad to see some updates on this trailer build.

Tyler

Re: reinke 48'x102 drop deck
 

Wow!!!!! that is outstanding.a true work of art

Re: reinke 48'x102 drop deck
 

I know it's been awhile :o I was waiting to get a tig to weld it together . thanks to smokin joe ;) I got 1 . after a couple trial welds , I felt it would look like dog crap if I tried . So , back to the cad , and milled out cross members with the bracing .

http://i830.photobucket.com/albums/z...r/DSCN0127.jpg

http://i830.photobucket.com/albums/z...r/DSCN0128.jpg

thanks for lookin :)

Re: reinke 48'x102 drop deck
 

Whoa! This is one really nicely constructed trailer!

Re: reinke 48'x102 drop deck
 

Jeez!! You can make anything look good! I'm sure it will be a work of art when its finished, keep up the good work :D

J.D.

Re: reinke 48'x102 drop deck
 

Looking good Stevie!!!

Re: reinke 48'x102 drop deck
 

Work of art. that will be one strong trailer.

Re: reinke 48'x102 drop deck
 

That's a Sweet looking trailer so far! Wow. It amazes me the talent you guys have.

Re: reinke 48'x102 drop deck
 

they really need an emoticon for drooling....

very nice build steve!

Re: reinke 48'x102 drop deck
 

yes yes very nice!

Re: reinke 48'x102 drop deck
 

Ya like this one http://i587.photobucket.com/albums/s...lies/drool.gif


or this one http://i587.photobucket.com/albums/s.../kidding75.gif

Re: reinke 48'x102 drop deck
 

Great Job Steve! I can't wait to see more.

Re: reinke 48'x102 drop deck
 

Looks great Steve, Keep us posted:cool:

Tim

Re: reinke 48'x102 drop deck
 

thanks guys I need to free the mill up to make up the sides and and trim peices .

Re: reinke 48'x102 drop deck
 

lookin great stevie.... that is going to be a great lookin trailer

Re: reinke 48'x102 drop deck
 

your finger tips must be half alluminum by now but that trailer is bomb diggity

Re: reinke 48'x102 drop deck
 

thanks Cory ,spudddddddd I finally got how I'm going to make the sides and rub rail figured out :eek: now just to get it programed up and cut :eek: so some new pics will be a few weeks yet :o:o:o

Re: reinke 48'x102 drop deck
 

when you do finally get to work you do great work LMFAO

Re: reinke 48'x102 drop deck
 

Gee looks like I better get a shipment to you so you got something to do :eek: or you going to ship all your stuff to your bro 2 O to do :rolleyes::rolleyes:

Re: reinke 48'x102 drop deck
 

if i had my stuff i wouldnt have time to pick on you!!!!!!!!!!!!!!!!

Re: reinke 48'x102 drop deck
 

Looks great! If i had access two our mill again next year at school I'd love to do a trailer like this. I love the cross members, they look perfect!

Chris

Re: reinke 48'x102 drop deck
 

thanks Chris

OK :o not much BUT finally got these side rails started :eek::eek: no stoppin now till she's done :D 1st op on the upper deck side rails . should be done tomorrow unless some unexpected drama pops up :rolleyes::confused: then we start the 32" long lower deck with only a 25" travel X axis :eek: ;)

http://i830.photobucket.com/albums/z...r/DSCN0225.jpg

http://i830.photobucket.com/albums/z...r/DSCN0226.jpg

thanks for lookin ;)

Re: reinke 48'x102 drop deck
 

those side rails are going to look nice!! Keep up the good work