HIAB X-HIPRO 1058 loader crane
This is a build of a Hiab 1058 loader crane. It will be mostly made out of steel and brass.
I don't have any truck to put it just yet :confused: https://i.postimg.cc/52zLq1DV/hiab-8...00x845-new.png https://i.postimg.cc/wvTv5cCK/Koko-n...-72435-bmp.jpg https://i.postimg.cc/Dzc0bYYd/Koko-n...-72116-bmp.jpg https://i.postimg.cc/Ss76Rrcw/HIAB-X-HIPRO-1058.jpg Here's some parts I made so far. https://i.postimg.cc/ZqX7pVBn/IMG-1107.jpg |
Re: HIAB X-HIPRO 1058 loader crane
|
Re: HIAB X-HIPRO 1058 loader crane
As this is a quite large crane, the cylinders are big. Both main cylinders have 26 mm pistons and the piston rod is 18 mm.
https://i.postimg.cc/HszsqN5y/2-sylinteri-v13.jpg |
Re: HIAB X-HIPRO 1058 loader crane
I just know it will be awesome :) Put it on the ATD :D
|
Re: HIAB X-HIPRO 1058 loader crane
Quote:
I saw not so long ago one older Volvo ATD with loader crane and small bed in a power line construction site. |
Re: HIAB X-HIPRO 1058 loader crane
|
Re: HIAB X-HIPRO 1058 loader crane
titandigs (Paul) daily driver looks like your top photo, though his trk may be a Volvo, he pulls 2-3-4 trls at a time hauling containers & cargo... you could make an 8x8 to haul all your gear to the site.
|
Re: HIAB X-HIPRO 1058 loader crane
Now this looks like a very cool project ! Will be interested to see the end product :)
|
Re: HIAB X-HIPRO 1058 loader crane
can u make 2
|
Re: HIAB X-HIPRO 1058 loader crane
Today I made the cylinder caps. The thread on them is M27x1
https://i.postimg.cc/zvfWzcnv/IMG-1139.jpg |
Re: HIAB X-HIPRO 1058 loader crane
Those are quite beefy! :)
|
Re: HIAB X-HIPRO 1058 loader crane
I had to make a custom wrench for the caps :)
https://i.postimg.cc/ydGCXRtL/IMG-1142.jpg https://i.postimg.cc/HxnCyzZJ/IMG-1143.jpg |
Re: HIAB X-HIPRO 1058 loader crane
I got the piston rods done :)
https://i.postimg.cc/vZLz3Qbg/IMG-1157.jpg https://i.postimg.cc/fTdtwJ0p/IMG-1160.jpg https://i.postimg.cc/T3XyhfVw/IMG-1163.jpg |
Re: HIAB X-HIPRO 1058 loader crane
This is an awesome project!
|
Re: HIAB X-HIPRO 1058 loader crane
Amazing work!!
|
Re: HIAB X-HIPRO 1058 loader crane
I got the pistons done :)
https://i.postimg.cc/KzCsx8Rc/IMG-1206.jpg https://i.postimg.cc/1t8YkqRY/IMG-1207.jpg |
Re: HIAB X-HIPRO 1058 loader crane
Them pistons are beautiful. just like the rest of the craftsmanship we've seen from you.
|
Re: HIAB X-HIPRO 1058 loader crane
Now that the forum is back up, here's the progress of last weekend :)
https://i.postimg.cc/9Xwdb0PW/IMG-1260.jpg https://i.postimg.cc/kGSWgYMV/IMG-1280.jpg https://i.postimg.cc/tTYhLCLN/IMG-1286.jpg https://i.postimg.cc/k4mmHBVk/IMG-1300.jpg https://i.postimg.cc/qvW08mpB/IMG-1302.jpg https://i.postimg.cc/Z5W4vktD/IMG-1308.jpg |
Re: HIAB X-HIPRO 1058 loader crane
Nice work Hemi ! :)
You make me want to try milling some of those steel sheet on my cnc router. What’s your feeds and speeds for a base guide line ? |
Re: HIAB X-HIPRO 1058 loader crane
Quote:
|
Re: HIAB X-HIPRO 1058 loader crane
Here's a few pictures of assembled crane :)
Next I should probably start making the telescopic arm. https://i.postimg.cc/8crLJtG6/IMG-1333.jpg https://i.postimg.cc/XXSdwdND/IMG-1330.jpg https://i.postimg.cc/nVsWGxcv/IMG-1326.jpg |
Re: HIAB X-HIPRO 1058 loader crane
looks real cool awsome work again
|
Re: HIAB X-HIPRO 1058 loader crane
I got the third boom done, inside that will come the telescopic extensions :)
https://i.postimg.cc/50MJTyXh/IMG-1336.jpg https://i.postimg.cc/qqJTBFXQ/IMG-1338.jpg https://i.postimg.cc/G2JRCRYH/IMG-1340.jpg https://i.postimg.cc/Kj0y150b/IMG-1344.jpg |
Re: HIAB X-HIPRO 1058 loader crane
Thank you Hemi !
There any reason why you have choose steel over aluminum ? I'm about to buy a Chinese knock off lampert welding machine and milling aluminum is way more easier on my cnc router... I'm scare the welding of aluminum is going to be bad. Seen some picture of peoples successfully weld with aluminum with those kind of machine. (Picture here) But maybe you already try and was not happy with it ? Otherwise nice work again :) |
Re: HIAB X-HIPRO 1058 loader crane
I saw on another forum that somebody used a teflon tape between the telescoping sections for lower friction when telescoping the sections.
I think it was one of the German forums. |
Re: HIAB X-HIPRO 1058 loader crane
Quote:
|
Re: HIAB X-HIPRO 1058 loader crane
Quote:
|
Re: HIAB X-HIPRO 1058 loader crane
That's looking incredibly wicked, can't wait to see this working!
I'd guess the Teflon tape used on sliding parts like that would be something like a Nitto Permacel p-421. It's a silicone adhesive backed smooth sheet of PTFE 5Mil thick. Most of what i've messed with is 1" wide. -- edit Ptfe = PolyTetraFluoroEthylene = Teflon is the brand name. Let me know if you can't track any down... |
Re: HIAB X-HIPRO 1058 loader crane
I think I used the wrong word. I was using google translate to read the forum. But yes it was something with an adhesive side and a slippery/low friction side.
https://www.modelltruck.net/showthre...PK100002/page3 self-adhesive PTFE film. Post number 78 is where I see it first mentioned. |
Re: HIAB X-HIPRO 1058 loader crane
PTFE is the actual name of the material used in Teflon. Teflon is just a brand name that stuck.
Excellent work Hemi. It's coming out prefect! |
Re: HIAB X-HIPRO 1058 loader crane
Quote:
|
Re: HIAB X-HIPRO 1058 loader crane
Thanks guys, I will look into those :)
|
Re: HIAB X-HIPRO 1058 loader crane
This will be a STRONG boom, once the crane is done!
|
Re: HIAB X-HIPRO 1058 loader crane
I made the base for the column :)
https://i.postimg.cc/wxPTvFpX/IMG-1403.jpg https://i.postimg.cc/g2bzyJrr/IMG-1404.jpg https://i.postimg.cc/nz3r0tgg/IMG-1382.jpg |
Re: HIAB X-HIPRO 1058 loader crane
I admire your craftsmanship! If I were to try & scratch build a crane, like you've done I fear it wouldn't function very well.
|
Re: HIAB X-HIPRO 1058 loader crane
Quote:
I mostly worried about the extension cylinders (6 pcs) placement and the routing of their hoses. |
Re: HIAB X-HIPRO 1058 loader crane
|
Re: HIAB X-HIPRO 1058 loader crane
Beautiful work!
|
Re: HIAB X-HIPRO 1058 loader crane
Amazing machine work !
|
Re: HIAB X-HIPRO 1058 loader crane
|
All times are GMT -4. The time now is 12:54 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.