1/14 vacuum trailer
5 Attachment(s)
Hey everyone, I've been on this forum for a while now just looking. I finally got up the courage to start my first build. i haven't worked with styrene before so there was a lot of experimentation. Anyways, on to the build. :D
The tank is made from PVC and the frame rails are from joe's. Attachment 1288 Attachment 1289 Attachment 1290 Attachment 1291 Attachment 1292 |
Re: 1/14 vacuum trailer
thats cool.....nice work!
|
Re: 1/14 vacuum trailer
5 Attachment(s)
|
Re: 1/14 vacuum trailer
5 Attachment(s)
|
Re: 1/14 vacuum trailer
4 Attachment(s)
Last ones for now. It is almost complete.
Attachment 1303 Attachment 1304 Attachment 1305 Attachment 1306 |
Re: 1/14 vacuum trailer
Thanks! I've been working on it for about a month now.
|
Re: 1/14 vacuum trailer
Great job on the trailer. And i'm wanting to do something similar.
What is the diameter of the pvc? Can't wait to see it finished. Thanx, Big John |
Re: 1/14 vacuum trailer
Cool build! Nice attention to detail.
Brian |
Re: 1/14 vacuum trailer
The tank is made up of a 3" x 24" piece of pvc, 2 three inch caps and seven 3" couplers. The couplers are sleeved over the pipe after you dremel out the lip.
Thanks everyone for the comments! I work around these trailers every day so it was hard not to resist the urge to build one. |
Re: 1/14 vacuum trailer
Nice to see something different. Styrene work is top notch! Very kool!
|
Re: 1/14 vacuum trailer
Um thats your first build????? You are doing an amazing job. :)
|
Re: 1/14 vacuum trailer
Thanks everyone. I'm hoping to have it finished within the next month. I still have a LOT of filling and sanding to do. Any ideas on a color? I can't seem to make up my mind. :confused:
|
Re: 1/14 vacuum trailer
Pretty neat to see something different and unique in a sea of flat beds, dump trailers, box trailers, and low boys. Nice work on that!
|
Re: 1/14 vacuum trailer
Quote:
Brian |
Re: 1/14 vacuum trailer
Nice looking build, and a he!! of an idea for a build as well. The Styrene work looks real good. Good Job!
|
Re: 1/14 vacuum trailer
Now that's pretty slick,she's really gunna be a nice trailer when your done.
FGD |
Re: 1/14 vacuum trailer
Thanks everyone. I should have some more updates in a few days. I would love to get a set of the white 2 hole wheels since every trailer has them out here. It's very rare to see shiny chrome wheels in the oilfield. :rolleyes:
|
Re: 1/14 vacuum trailer
Awesome custom build.
|
Re: 1/14 vacuum trailer
Great job.. Looks like a fun build
|
Re: 1/14 vacuum trailer
i agree that is a awesome build great detail!
|
Re: 1/14 vacuum trailer
4 Attachment(s)
Thanks everyone for the comments!
I have a small update. I got the pressure pipe fitted to the side of the tank and started on the long process of filling and sanding. :D Here's some pics so far: Attachment 1328 Attachment 1329 Attachment 1330 Attachment 1331 |
Re: 1/14 vacuum trailer
That thing is awesome, very unique build. Keep it up.
|
Re: 1/14 vacuum trailer
Very cool build!! You are doing an amazing job!!I've seen mostly white ones, but I have seen some in blue. :cool:
|
Re: 1/14 vacuum trailer
This is one good looking suck truck! With all of the Marcellus shale drilling going on around our area there are hundreds of these types of bodies on triaxle trucks. Some are working show trucks.
Brian |
Re: 1/14 vacuum trailer
Thanks everyone! I run a salt water disposal in Dew, TX so i see at least 50 of these a day. I'm building this one as a prototype to make sure its possible. The next one will be functional using a nitro fuel pump. :D It will be a good way to get rid of all those pesky water puddles in the driveway. :rolleyes: 1.5 gallons at a time. Haha.
|
Re: 1/14 vacuum trailer
5 Attachment(s)
Another small update. Getting down to the details now. I started working on the hatches and the back valves. I've also included a pic of the truck I've been working on too. :D It uses one of the bruder volvo bodies and its sitting on a cut down king hauler frame. I shortened the flatbed trailer I had and mounted it to the truck using the fifth wheel and 2 mounts I made for the front. Sorry for the blurry pics, they are from my phone. :(
Attachment 1339 Attachment 1341 Attachment 1342 Attachment 1343 Attachment 1344 |
All times are GMT -4. The time now is 07:53 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.