Project Shot Gun my new dump truck
 

Hello all.I have been wanting to build a new dump truck for a while now. I still have my blue one with the pup trailer but its time for a new addition. I also got the bug really bad after seeing Brian in pa dump trucks and talking to Rod(stepside) about his aeromax dump he is building. The final straw was when Ih Steve delivered my new coal bucket,and Since then its been game on. First thing was a set of IH Steve's frame rails cut to 29.5''.
http://i252.photobucket.com/albums/h...psb8a5862a.jpg
http://i252.photobucket.com/albums/h...pscd63edf7.jpg
I started building this truck from the rear to the front because the suspension would be a Chalmers suspension that I milled and it has to fit under the box along with the lift axles.
http://i252.photobucket.com/albums/h...pse93a71a8.jpg
This is the first shot of the suspension. There is a spring inside the bag that adjusts for loads
http://i252.photobucket.com/albums/h...pscca4d1fa.jpg
http://i252.photobucket.com/albums/h...psbbb8f463.jpg
I have more pictures of the suspension to come. Next were the lift axles,I looked at Henderson suspension and robbed some ideas from there.
http://i252.photobucket.com/albums/h...psbdf73ebb.jpg
http://i252.photobucket.com/albums/h...ps05c47710.jpg
http://i252.photobucket.com/albums/h...ps51fb67a4.jpg
Project Shot Gun will have 3 lift axles with self steering and spring returns.I cnc'ed the axles,hangers,trailing arms and various other suspension parts to get it to function on all types of terrain. Next installment will be the drive line.Thanks for looking.

Ed

Re: Project Shot Gun my new dump truck
 

Its about time you made a new addition to your already flawless fleet! Ill be keeping an eye on this one, GREAT start.

Re: Project Shot Gun my new dump truck
 

I'm back. This time we will tackle the driveline. I bought some Integy axles after seeing them on one of Travis rigs and thought they would be perfect for this rig, plus I wanted this truck to be all wheel drive(selectable).I chose a R2
trans with a dig to control the 4wd vs the 6wd.
http://i252.photobucket.com/albums/h...psc4962e2b.jpg

http://i252.photobucket.com/albums/h...ps9ca6bc76.jpg

So now, axles are in .Check. Lift axles in. Check. Rear drive shafts in, carrier bearings in. Check.Tranny installed .Check.
Installed servos and made up spring returns for servo down pressure to save my servos when on uneven terrain.
http://i252.photobucket.com/albums/h...psa3756fae.jpg
http://i252.photobucket.com/albums/h...ps77c69e83.jpg

and the MONEY shot.
http://i252.photobucket.com/albums/h...ps296cd3eb.jpg

I like the fact that there is plenty of clearance when the axles are raised.Thats it for now.

Ed

Re: Project Shot Gun my new dump truck
 

All that shiny aluminum looks very nice! That rear suspension looks trick too!

Re: Project Shot Gun my new dump truck
 

Thanks Brian, you know I am a FAN of your work. You have helped our hobby grow in leaps and bound in a short time.Keep it going.:D

Ed

Re: Project Shot Gun my new dump truck
 

Thanks RCP57.You have changed the aluminum game. You make awesome bodies,dump bodies ,and whole lot more I'm sure. Great work and I will looking for more of your awesome builds.

Ed

Re: Project Shot Gun my new dump truck
 

Wow Ed that is looking really nice! So are you going to take it to Nate's meet next summer and get it dirty?

Re: Project Shot Gun my new dump truck
 

That's the plan and I am gonna pack it up and travel to Cabin Fever and hang out with Jammer(Ed),IH Steve,Benny,Tony,and everyone else.I plan on this guy running in dirt,sand and rubber.

Thank you also Truckmaker.

Ed

Re: Project Shot Gun my new dump truck
 

Just when you think it can't get any better Bam !!! It just did like always Ed absolutely beautiful

Re: Project Shot Gun my new dump truck
 

Great looking chassis! Nothing beats making your own parts and seeing them work!!

Re: Project Shot Gun my new dump truck
 

Ed, AMAIZING as usual. Another show stopper well on its way. Going to keep an eye on this build. Love it! Your ingenuity and aluminum work is impeccable.

Re: Project Shot Gun my new dump truck
 

It's about time we get to see this . Excellent job on the charmers , you nailed it .

Re: Project Shot Gun my new dump truck
 

Very nice work Ed that rear suspension is really trick. Hope you make it to Cabin Fever this year. Ed

Re: Project Shot Gun my new dump truck
 

That's some serious lift ' great work.

Re: Project Shot Gun my new dump truck
 

Impressive build, the rear drive axle suspension is amazing as are your pusher axles, they are a work of art. Are you going to make your rear suspension or the pushers available for us to purchase??

Re: Project Shot Gun my new dump truck
 

Thanks Everyone for the comments.I have more pictures to post just trying to keep the build in order.
The suspension pieces will be available soon and I will talk to Travis about a vendor store to sell them.
The truck is in a million pieces because I am painting the chassis rite now.Pictutres later today,

Ed

Re: Project Shot Gun my new dump truck
 

Ed, that is some serious work you have going on there, great job and attention to detail.

Re: Project Shot Gun my new dump truck
 

Re: Project Shot Gun my new dump truck
 

Thanks for the major compliment! I don't think I have changed much though, just added to it slightly.

Anyway, we are all waiting for more pictures so what is taking so long?????

Re: Project Shot Gun my new dump truck
 

Very nice Ed:cool:Cant wait to see the the cab and dump body

Re: Project Shot Gun my new dump truck
 

Hello everyone, a few mock up pictures of the front suspension. This truck has available 6wd with the use of the RS trans with a dig, so I went with the Lesu front springs and mounts.
http://i252.photobucket.com/albums/h...ps2ae59677.jpg
http://i252.photobucket.com/albums/h...ps8d3d3a0d.jpg

I had to machine a set of control arms for the integy front axle for them to clear the front super single wheels.I will snap some pics of those as soon as the paint dries.

That's it for now.

Ed

Re: Project Shot Gun my new dump truck
 

Thanks guys for the comments.I am among some of the BEST builders,and people around.I feel honored that you guys like the build, that's what keeps me sawing away at this project.Thank you guys so much.

ED

Re: Project Shot Gun my new dump truck
 

Here are some pictures of the rear suspension on my test chassis.
http://i252.photobucket.com/albums/h...ps5e3d76b6.jpg
http://i252.photobucket.com/albums/h...ps1e762fc2.jpg
http://i252.photobucket.com/albums/h...ps553da5c9.jpg
http://i252.photobucket.com/albums/h...psd98f5f3b.jpg

The detail in the control arms were milled to simulate the 1:1.I have about 1 inch of suspension travel up and down.
more to come soon.

Ed

Re: Project Shot Gun my new dump truck
 

Great job on the Chalmers suspension. I have it on my 1:1 Mack.

Cheers, Neil.

Re: Project Shot Gun my new dump truck
 

Hi Ed my computer went down and lost a lot of info. Is that a Pete or a KW cab? Did you get another mill yet? Nice work on the suspension. Ed

Re: Project Shot Gun my new dump truck
 

Man ED!!! Looking killer so far!! You know ill be watching this!!!

Re: Project Shot Gun my new dump truck
 

Thanks again guys for the comments. Jammer the body is a KW900L body I asked Goose19 to modify in his drawing for me.Shapeways printed the body and then the hard work began.I will post some up close pictures and detail pictures real soon.I did get a new mill,a zx45 that being cnc'ed as we speak.should be done in about 3 weeks.I added the 4th axis like you did on your mill.Talk to you real soon.

Ed

Re: Project Shot Gun my new dump truck
 

What your not done yet!!!! What is going on man!!!????

Re: Project Shot Gun my new dump truck
 

Love those dump truck builds!!!:D

Keep it coming Ed!

-Alex

Re: Project Shot Gun my new dump truck
 

Ed,
I Am tossing in the towel. Just when I thought it could not get any better you go a build what appears to be another amazing rig. I hope that truck makes it to Indian this year and is not sold before hand...Great job my friend that suspension is nuts.....

TONY

Re: Project Shot Gun my new dump truck
 

**** skippy!!

Re: Project Shot Gun my new dump truck
 

Impressive milling and design. Those some tiny nuts you have there........lol

Re: Project Shot Gun my new dump truck
 

Hey everyone I'm back, and Tony I picked up your towel and its in the washer:cop:.Thanks again for the comments, I need them and according to Izzy ,I need bigger n#ts.LOL. I have a small update for you guys. I painted the chassis and started reassembly. here is where I amhttp://i252.photobucket.com/albums/h...ps0254444f.jpg
http://i252.photobucket.com/albums/h...psad3628ef.jpg
http://i252.photobucket.com/albums/h...ps7ccd06ca.jpg
http://i252.photobucket.com/albums/h...ps0d099301.jpg
http://i252.photobucket.com/albums/h...ps44f44a37.jpg
http://i252.photobucket.com/albums/h...psb6dc95bc.jpg

Re: Project Shot Gun my new dump truck
 

beautiful paint looks killer!

Re: Project Shot Gun my new dump truck
 

Thanks Diesel, some of the pictures are blurry. I will take better pictures soon.

Ed

Re: Project Shot Gun my new dump truck
 

Killer set up!!!!!!!!!!!!!! Can't wait to see more pics!!!!!!!!!!

Re: Project Shot Gun my new dump truck
 

Truck looks good Ed ,can't wait to see it.;)

Re: Project Shot Gun my new dump truck
 

I'm dying to see this bad boy finished.....

Re: Project Shot Gun my new dump truck
 

Oh Ed the blurry pictures keep the suspense building and all of us on the edge of our seats waiting for the next update looking good so far can't wait to see more.

Re: Project Shot Gun my new dump truck
 

Looking forward to more pictures Ed, it's looking real good, especially the color! It kinda reminds me of my first build. What kind of cylinder are you using for the bed?