Re: WRECKER
looking god so far.. just so you know the T bar needs to pivot
|
Re: WRECKER
Looks like a smart idea, keep those photos coming.
|
Re: WRECKER
Thanks guys. Made a bit more progress.
http://i1059.photobucket.com/albums/...38035FCD31.jpg http://i1059.photobucket.com/albums/...8FC9B0B411.jpg Shortened the sleeper. http://i1059.photobucket.com/albums/...38DC13FE0C.jpg http://i1059.photobucket.com/albums/...0986F18746.jpg http://i1059.photobucket.com/albums/...19A8241C85.jpg |
Re: WRECKER
Now that's cool!! great boom mechanism build and thanks for showing how you built it! you've helped me will some ideas I've had bouncing around my head for awhile but didn't know how to make so of them!
keep up the amazing build Keptain jack! |
Re: WRECKER
Wow..jack glad to see you back at it again ..love to see this when its done ...hint ...hint ....lol you know what😊😊😊
|
Re: WRECKER
For the main frame I decided to use Grand hauler with addition of third axle.
http://i1059.photobucket.com/albums/...696BFAEF0A.jpg http://i1059.photobucket.com/albums/...445B5B7EA1.jpg http://i1059.photobucket.com/albums/...2F7163A5BA.jpg http://i1059.photobucket.com/albums/...8329F3C3EF.jpg |
Re: WRECKER
GREAT job! Keep us posted.
-Terry |
Re: WRECKER
Looking great.
|
Re: WRECKER
Test fitting and test drive.
http://i1059.photobucket.com/albums/...4C039FCBB0.jpg http://i1059.photobucket.com/albums/...D4C877BAC6.jpg http://i1059.photobucket.com/albums/...9DDC1433DB.jpg Locked the trany in low gear. http://i1059.photobucket.com/albums/...5FEBA5345E.jpg |
Re: WRECKER
I wish my cat would go fishing with me like that.
This is going to be a very nice and big tuck! |
Re: WRECKER
Looking good Jack. How strong are those actuators ? I like how solid that wrecker arm looks! :cool:
|
Re: WRECKER
they will lift my china kat on the lowboy. 4 of them lift cooper d11 on his scissor lift
|
Re: WRECKER
Thats really wicked looking.
Are you planning to have the tbar just do bumper lifts, or add an actuator and a pair of L arms to make it a self loading wheel-lift? |
Re: WRECKER
Quote:
|
Re: WRECKER
I'm kind of in the process of planning out a wrecker build. I'm very interested in seeing the outcome of this one! Great job so far!
|
Re: WRECKER
A question for electronics savvy: Did a test drive today with all the functions connected, Firgellis are working fine, however, when connecting winch motor with its own speed control and its own battery,to the RX, the truck goes full throttle....
|
Re: WRECKER
nice work
|
Re: WRECKER
Quote:
|
Re: WRECKER
The radio is Futaba FASST, throttle on ch 3 and winch on ch 4.
|
Re: WRECKER
Brandon, the actuators are:L 12-30-210-6-R
|
Re: WRECKER
Quote:
|
Re: WRECKER
Hi do you have a schematic drawing of the cabeling or some photos to get an overview what is setup at the moment?
|
Re: WRECKER
When you run 2 esc, you are supposed to pull the red wire out of the RX plug on one esc so the 2 bec in them don't fight over trying to power the rx. Lift the tab and slide it out and just heatshrink or tape it out of the way. It'll smoke the bec inside one of the esc fairly quickly if you don't.
It gets even more important when running 2 isolated battery packs, or external bec. http://www.rccrawler.com/forum/elect...otors-etc.html If that doesn't get it, post a pic or wiring diagram of your setup. |
Re: WRECKER
Great advice Frizzen, I'll look into it. Mean while, I changed the esc, from chinese to RC4WD and it seems to work fine.
here is the picture of aftermarket esc http://i1059.photobucket.com/albums/...0709/winch.jpg I'll try again with aftermarket later on today and will pull the red wire out, will post the results. Thanks to everyone who replied to my question. |
Re: WRECKER
Disconnecting red wire from rx connector worked great!! But now, new question: I have attached retracting legs to the rear of the truck (Tamiya, the ones that go on the trailer), I have only one channel left on the radio, up and down switch I thought of using it to deploy and retract legs. I soldered the motor wires to the the motor of the servo and it works,however, the travel distance is to short !!! Disconnecting the stopper on the servo makes it rotate continuously non stop. Any suggestions on how to deploy the the legs?
Thanks |
Re: WRECKER
Depending on what radio you have you could run another RX and have it in a different model memory like others do when you run out of channels or just but a new radio with more channels...
Cheers Tracy |
Re: WRECKER
Glad to hear pulling the wire got the esc working!
Does your radio have 'epa' or end point adjustment on that channel? If so, you can start dialing the endpoints further away from center until you're happy. If it doesn't, you might be able to fit a 'servo stretcher' in the model that wires between the rx and servo to control endpoints. Its a set of pots and a circuit card that let you configure center and each end stop independantly, so they take some time to fiddle with. |
Re: WRECKER
Thanks Tracy. Thanks Frizzen, I'll see what my radio is capable of doing.
Jack |
Re: WRECKER
|
Re: WRECKER
great idea on the rear down riggers
|
Re: WRECKER
Starting to look like the 50 Ton I used to drive before I moved back to Illinois. Great start!
|
Re: WRECKER
Looking good Capt!
|
Re: WRECKER
Did some more work on the truckhttp://i1059.photobucket.com/albums/...3D8ED6FAA4.jpghttp://i1059.photobucket.com/albums/...9CBBCC6030.jpghttp://i1059.photobucket.com/albums/...0F497ADEBC.jpghttp://i1059.photobucket.com/albums/...95D024C23E.jpghttp://i1059.photobucket.com/albums/...0E1A9B491B.jpghttp://i1059.photobucket.com/albums/...9DFEE423EB.jpg
|
Re: WRECKER
Beautiful work!
|
Re: WRECKER
Great work so far, Looking forward to more pics and updates.
|
Re: WRECKER
|
Re: WRECKER
:jaw:very nice work
|
Re: WRECKER
That is awesome! Doing great man
|
Re: WRECKER
wow jack looks fantastic..let me know where i can pick it up when its finished ;)
|
All times are GMT -4. The time now is 02:33 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.