Eagle/RC4WD 4200XL excavator - track motors upgrade kit
P/N 22002 Track motor upgrade kit
340 USD, + shipping 40 USD worldwide (cost does not include VAT, sales tax etc that may be added at arrival in your country) Track motor upgrade kit for Eagle JD-1/4200XL excavator (‘RC4WD Earth Digger) These upgrade track motors will give you considerable higher power & more suitable max RPM than the original track motors. Original track motors has often be experienced as underpowered and the spur gear transmissions is one of the weakest points. The upgrade kit has industrial planetary transmissions that will take considerable more ‘beating’ than original transmission. NOTES: ******************** 1) UPDATE 10 March 2018 : Kits now delivered with outer diameter of motors turned down to 34.7mm, for direct mounting on both version 1 & 2 of the 4200XL, that have some variation in the track motor bracket's bore 2) The motors are NOT prepared to run submerged in water. The motor covers will protect from light rain and splash of water, but water will get into the motor if submerged. If getting submerged by accident, stop running at once, take covers off in order to let the motors dry out. ******************** Kit includes; • Planetary brushed gearmotors, 540 size motors (5000 rpm), output ~45 rpm max (versus original gearmotors ~20 rpm) • Cables and minor electrical parts (existing motor cables in the undercarriage will be too short for the new track motors) • Instruction manual (English, electronic) (• Compression springs can be delivered as an option if one got the older version of the 4200XL with no original springs. 20 USD for a kit incl brackets) Advantages too available brushless track motors upgrade kit on the marked; • Less complicated and time consuming installation. No need for separation of undercarriage and upper structure in order to replace centre electrical slip ring • More stable running of the tracks at ‘low trottle’ and more control than the brushless gearmotors which are relative high geared (60 rpm). • Reduced problems regarding the tracks start rolling during digging operation, as can be experienced with brushless motors which are dependend of well functioning electronic parking brakes in the ESC’s. Brushless motors do not have the internal resistance against rotating, as is the case with brushed motors. • The original brushed motor ESC’ can be used, and not to be replaced as is case with the brushless motors kit. Pictures: http://www.rclastebilbutikk1.no/tilb...wd-graver.html |
Re: Eagle 4200XL excavator - new track motors
I would be interested in thread and more info. Thanks
|
Re: Eagle 4200XL excavator - new track motors
Sweet upgrade Rimrock. Do you have a before and after video of the modification ?
|
Re: Eagle 4200XL excavator - new track motors
looks good rimrock!! let me know when you tackle the china kat also
|
Re: Eagle 4200XL excavator - new track motors
Thanks guys) I guess I will open a sales thread in near future here with some more info, I also have other stuff in the coming. Should have some videos, definitely. Will try making a couple of videos, at least the 'after videos' of this machine, that's with a local customers now.
The KAT excavator, yeah that's one of our other acquaintances from China, 'we love China';) I've got one of them myself, in pieces..See that it also should be in need for compression springs on the idler wheels, at least. What about the original track gearmotors? They seamed stronger than the Eagle motors, but I havn't tested them in operation for real yet. Anyone got problem with them? |
Re: Eagle 4200XL excavator - new track motors
one of the guys in my china kat thread blew up two sets
|
Re: Eagle 4200XL excavator - new track motors
Quote:
David |
Re: Eagle 4200XL excavator - new track motors
Hi Rimrock,
I also own a Buychina Kat as well, If you were to make idler wheel kit with Retrofitted compression springs and a set of upgraded track gear motors for the buychina, I've would be happy to buy a set of each off you. I bought my Kat around Xmas 2014 and I still have not got it up and running yet, due to work and life getting in the way and my replacement slip ring getting lost in the mail for 3 months. Regards Cam. |
Re: Eagle 4200XL excavator - new track motors
Quote:
Oyvind |
Re: Eagle 4200XL excavator - new track motors
once you have sets available for the 4200 I will defiantly take one. Stock stuff is done and need to fix.
|
Re: Eagle 4200XL excavator - new track motors
A video of one 4200 with the new track motor kit. It's running here up to about 2/3 of full speed. Possible limited speed, in % of full, can be set on most radios. Pretty good torque from those motors, one need a very strong grip to stall them by griping the tracks with one hand) Planning to have some new kits ready for sale in April,
https://youtu.be/60gSjtnwJog |
Re: Eagle 4200XL excavator - new track motors
That 4200 moves around with ease! Great job Rimrock :)
|
Re: Eagle 4200XL excavator - new track motors
Definitely keep us posted. I'm in for the motor upgrade and new tensioner when available.
|
Re: Eagle 4200XL excavator - new track motors
Quote:
|
Re: Eagle 4200XL excavator - new track motors
Hi all, busy days with different projects going on parallel here;), but just working at finishing the first 5 track motor kits this week, ready for shipping next week) Also creating a installation guide that comes with the kits.
For ordering, just send me a PM, and we take it from there |
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
PM sent
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
PM sent
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Woohoo can't wait to put my ho to work with these new stronger motors! :cool:
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Quote:
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
No not yet parcel is still in transit.
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Received my kit today! :)
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Oh boy, lets see some install pics when you get a chance!! Got my hoe prepped, just waiting for the kit.
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Just got mine installed. Straight forward install and a great upgrade. Nice and smooth movement with a little added speed. Thanks Rimrock!!
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Nice! Haven't gotten around to it yet still busy polishing this dump trailer.
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Some guys are serious about their DUMP...............
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Quote:
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Quote:
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Alright farmer, put the chamois down and get those track motors installed!!
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Lol
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
He probably looks like a coal miner by now with all of that black crud flying off of the buffing wheel!
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
No kidding! The inside of my ears are black! Lol going to have fun cleaning the garage once done there's compound residue everywhere!
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Hence, that's why I did my polishing outdoors! But that wasn't till we noticed polishing in the kitchen was not a good idea.:eek::lol:
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Oh boy I can imagine what the kitchen would of looked like!
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
My Wife handle the polishing...................:p
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Lucky you! Would definitely be fun letting someone else get dirty for a change! lol
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
In the middle of installing mine...... SO I have the "2.0" kit. They built in a compression spring into the idler unit so you don't have to break down the track. I cheated and just unbolted the motor and pulled some slack into the track. Sadly less them 10 feet on the original motors and all had cold solders. One wire completely broken and just resting on the lead and one has a slice in the casing from being pulled thru the small slots for the wires( something everyone needs to watch out for as they are sharp). At this point 10 feet maybe 5 minutes of hydro run time and ive swapped out the track motors, received a new hydraulic tank as mine has metal threading floating inside, new hydro lines as mine are short and a new radio system...... One day ill get to use it. Good luck all
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Hi Rimrock
Any updates for the upgrade kit for the Buy China Kat Excavator? Regards Cameron. |
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Quote:
Hi Looked into it earlier on in the spring, did conclude that my motors for the 4200XL was not particular suitable for a bolt-on solution for the KAT, so kind of put it away a bit, while searching for a more suitable gear motor. Have gotten hold of some compact high performance gear motors with a suitable rpm just the other day, that I plan hook up with a bevel gear transmission. Guess I'm on to something) I have the KAT machine myself, so will test fit the prototype gear motors on to that one first. Will create a separate thread here as I proceed, regards Oyvind http://i1148.photobucket.com/albums/...psrhcnubwn.jpg |
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Quote:
|
Re: Eagle 4200XL excavator - track motors upgrade kit (updated 26'th April 2016)
Quote:
Regards Cameron. |
All times are GMT -4. The time now is 11:00 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.