Breaking Bad, Fleetwood Bounder
 

This is what I mean about getting side tract. I think it will be cool when it's done, it will be different. I need to finish something before I start another LOL.
[IMG]http://i979.photobucket.com/albums/a...r/DSCF1010.jpg[/IMG] [IMG]http://i979.photobucket.com/albums/a...r/DSCF1009.jpg[/IMG]

Re: Breaking Bad, Fleetwood Bounder
 

A motorhome.. I want to do one of them..


Wayne

Re: Breaking Bad, Fleetwood Bounder
 

About what scale is that? Any clue?

Re: Breaking Bad, Fleetwood Bounder
 

well if i did the math right it should be 1/14th but it seems a little big. i made the width fit the tamiya axles. I am going to have the widows and doors 3D printed, and the grill I think

Re: Breaking Bad, Fleetwood Bounder
 

friggin rights!

Re: Breaking Bad, Fleetwood Bounder
 

cool!

Re: Breaking Bad, Fleetwood Bounder
 

That's gonna be cool

Re: Breaking Bad, Fleetwood Bounder
 

i hope so Now I just need to stay focused

Re: Breaking Bad, Fleetwood Bounder
 

Did a little work on the Bounder today made a grill out of steel and changed the windshield a little bit and did some welding on the roof line, I will have to use some bondo on this one LOL[IMG]http://i979.photobucket.com/albums/a...r/DSCF1017.jpg[/IMG][IMG]http://i979.photobucket.com/albums/a...r/DSCF1016.jpg[/IMG][IMG]http://i979.photobucket.com/albums/a...r/DSCF1018.jpg[/IMG]

Re: Breaking Bad, Fleetwood Bounder
 

Are you going to have bullet holes in the side door too?? ;):D

Re: Breaking Bad, Fleetwood Bounder
 

well yea, it just wouldn't be the same with out them:D

Re: Breaking Bad, Fleetwood Bounder
 

Very nice metal work !! ,very interesting build ,how are you welding it up ,stick,mig,tig ?. keep up the great work :D

Re: Breaking Bad, Fleetwood Bounder
 

This thing is going to be heavy! What gauge metal are you using? Something like 16? I get sidetracked all the time! I never get anything done. :)

Re: Breaking Bad, Fleetwood Bounder
 

I used mig to get it stuck together. then I used tig to finish the seem. The metal is 16 gauge kinda heavy for this but its what I had so I used it

Re: Breaking Bad, Fleetwood Bounder
 

The 3d printed gave me some presents today. also waterjeted the ladder and a couple of mirrors out of stainless steel.[IMG]http://i979.photobucket.com/albums/a...r/DSCF1026.jpg[/IMG] [IMG]http://i979.photobucket.com/albums/a...r/DSCF1025.jpg[/IMG]

Re: Breaking Bad, Fleetwood Bounder
 

Haha you too huh ? :lol:

looks good 22 with all that weight it will sure doo that boat rocking they all have

Re: Breaking Bad, Fleetwood Bounder
 

yea i was thinking that to:D

Re: Breaking Bad, Fleetwood Bounder
 

Looking good with the 3d printed parts! those things are awesome

Re: Breaking Bad, Fleetwood Bounder
 

I like very much your project

Re: Breaking Bad, Fleetwood Bounder
 

Real cool, did you cut the holes for windows,or punch pressed?

Re: Breaking Bad, Fleetwood Bounder
 

Waterjet:D

Re: Breaking Bad, Fleetwood Bounder
 

you got all the cool toys!!! I want a waterjet and 3d printer!

Re: Breaking Bad, Fleetwood Bounder
 

yea I am lucky to have a job that gives me access to all these cool things. But even with all the cool stuff I still like to do things with manual machines and by hand.:D

Re: Breaking Bad, Fleetwood Bounder
 

I would also like to say that I am very impressed with a lot of the builders on here some of you do not have access to high tech equipment and manage to build some really amazing things. My biggest problem is that I do things to fast I lack the patience that is required for the real fine detail that some people put into there models. I like to make them work and then I want to move on. But I still have fun and enjoy what I do and that is what really matters after all this is a hobby.:)

Re: Breaking Bad, Fleetwood Bounder
 

NICE WORK ....BIT*H!

I can't wait to see this rollin!

Re: Breaking Bad, Fleetwood Bounder
 

Awsome job!!! I dig the bullet holes in the door too!!!!

Re: Breaking Bad, Fleetwood Bounder
 

Thanks for all the positive comments, I will have some more photos soon

Re: Breaking Bad, Fleetwood Bounder
 

Here are some new photos of the Bounder, not a lot of progress and some set backs. I had to open up the wheel openings to fit the King Hauler tires:mad:
and then I got one of them in the wrong spot so I had to cut out a piece and make a piece to insert and weld in it will look ok but it's just more work.:(
[IMG]http://i979.photobucket.com/albums/a...r/DSCF1033.jpg[/IMG][IMG]http://i979.photobucket.com/albums/a...r/DSCF1032.jpg[/IMG][IMG]http://i979.photobucket.com/albums/a...r/DSCF1031.jpg[/IMG][IMG]http://i979.photobucket.com/albums/a...r/DSCF1027.jpg[/IMG][IMG]http://i979.photobucket.com/albums/a...r/DSCF1029.jpg[/IMG]

Re: Breaking Bad, Fleetwood Bounder
 

I think its looking awesome and to me looks like a lot of progress!! you could always use the low loader tires too. just an idea.

keep the pics coming!

Re: Breaking Bad, Fleetwood Bounder
 

Yea I was thinking that but i was being cheap and using stuff that I had:o

Re: Breaking Bad, Fleetwood Bounder
 

Waiting for parts:(

Re: Breaking Bad, Fleetwood Bounder
 

the part that makes builds the most frustrating.

Re: Breaking Bad, Fleetwood Bounder
 

Looks good keep up the good work :jaw:

Re: Breaking Bad, Fleetwood Bounder
 

:mad: Man it's just to cold out, I do not want to turn on the heat in the garage it will cost me a fortune. and I have lots of work to do. :mad:

Re: Breaking Bad, Fleetwood Bounder
 

How did you make the AC units??


Wayne

Re: Breaking Bad, Fleetwood Bounder
 

3D printer:D

Re: Breaking Bad, Fleetwood Bounder
 

well I worked on the frame today despite the cold and burned up a bunch of fuel:lol: the rear leaf springs are from a Tamiya High lift and the fronts are from a King hauler[IMG]http://i979.photobucket.com/albums/a...r/DSCF1055.jpg[/IMG][IMG]http://i979.photobucket.com/albums/a...r/DSCF1054.jpg[/IMG][IMG]http://i979.photobucket.com/albums/a...r/DSCF1053.jpg[/IMG][IMG]http://i979.photobucket.com/albums/a...r/DSCF1052.jpg[/IMG]

Re: Breaking Bad, Fleetwood Bounder
 

nice!!! so it should be driving around soon?? LOL

Re: Breaking Bad, Fleetwood Bounder
 

progress!

Re: Breaking Bad, Fleetwood Bounder
 

I have been toying with the idea of using a cordless drill motor and gearbox assembly from a Ryobi drill that I have, its a two speed. Any ideas on that I just thought it would be a little different and unique.:bounce: