|
Re: Metal Excavator - Magom HRC MG1.4
Oh, it doesn't look like it will be that fun, I think you would be better off returning it before it gets dirty. :p
On a serious note, thanks for the nice pictures! Neat to see what to expect out of the box on this sort of thing!;) As I review the photos, I have a question. How do the pins in the tracks go in and out? I can't tell if they are threaded bolts or pins or what? Thanks! Jim |
Re: Metal Excavator - Magom HRC MG1.4
Thanks for posting these pictures. It is nice to see what the actual kit looks like. Keep us updated!
|
Re: Metal Excavator - Magom HRC MG1.4
WOW nice kit. Going to give you loads of fun building and then mucking about!
Love the slewing mechanism they have build in there. Keep the pics coming! Stephan |
Re: Metal Excavator - Magom HRC MG1.4
Hi Jim,
Tracks are held together with a pin and c clip. I try take some close up pictures. |
Re: Metal Excavator - Magom HRC MG1.4
Looks pretty cool, what was the total cost including postage to UK? Also I'm from the UK too, which part are you from?
|
Re: Metal Excavator - Magom HRC MG1.4
how big a machine is it? cat 320,345
|
Re: Metal Excavator - Magom HRC MG1.4
Quote:
Took just under 2 weeks from order to dispatch then 1 week to deliver. I'm West Yorkshire, what about you? |
Re: Metal Excavator - Magom HRC MG1.4
Quote:
dimensions are on bottom of this page http://www.magomhrc.com/en/mg-14-met...vator-kit.html I'm planning on painting it like a Hitachi ZX350 |
Re: Metal Excavator - Magom HRC MG1.4
ive asked mongom 3 times what model it is
but never got a answer. my kat is a wedico 345 knock off. |
Re: Metal Excavator - Magom HRC MG1.4
Quote:
|
Re: Metal Excavator - Magom HRC MG1.4
At moment they seem slow at answering emails. I Last emailed them Friday and got a reply Tuesday saying they really busy at the moment and vaguely answered my questions.
My guess is it is a upscaled bruder cat excavator. |
Re: Metal Excavator - Magom HRC MG1.4
Quote:
|
Re: Metal Excavator - Magom HRC MG1.4
Quote:
|
Re: Metal Excavator - Magom HRC MG1.4
Nice! They are really getting better and better! I love that it takes less than a week to ship across the ocean and to my door step here in oregon. but please some info on the tracks i am serious about buying them apposed to building some? And a quick measurement of the drive sprockets please! I love the new look! You think its the sane rams as before just with bigger inlet and outlets? Mine are 3mm still. keep the pics comin and abd info on how well its built!
|
Re: Metal Excavator - Magom HRC MG1.4
Okay here's some pictures of the tracks, track pins, rams
https://lh3.googleusercontent.com/-l...2/IMG_2819.JPG https://lh3.googleusercontent.com/-J...2/IMG_2820.JPG https://lh3.googleusercontent.com/-o...2/IMG_2821.JPG https://lh3.googleusercontent.com/-d...2/IMG_2822.JPG https://lh3.googleusercontent.com/-u...2/IMG_2823.JPG https://lh3.googleusercontent.com/-n...2/IMG_2824.JPG https://lh3.googleusercontent.com/-J...2/IMG_2825.JPG https://lh3.googleusercontent.com/-R...2/IMG_2826.JPG https://lh3.googleusercontent.com/-S...2/IMG_2827.JPG https://lh3.googleusercontent.com/-N...2/IMG_2828.JPG |
Re: Metal Excavator - Magom HRC MG1.4
Great pictures I've been considering this model or the Eagle machinery 4200xl excavator. The price is good at 2082$ in kit form with electronics.
|
Re: Metal Excavator - Magom HRC MG1.4
Thank you so much for those measurements. i will be tuned in for updates
|
Re: Metal Excavator - Magom HRC MG1.4
Awesome will be buying one soon
|
Re: Metal Excavator - Magom HRC MG1.4
It's been slow progress but finally got a start on the painting.
https://lh3.googleusercontent.com/-j...2/IMG_2855.JPG https://lh3.googleusercontent.com/-c...2/IMG_2856.JPG https://lh3.googleusercontent.com/-r...2/IMG_2857.JPG https://lh3.googleusercontent.com/-g...2/IMG_2859.JPG https://lh3.googleusercontent.com/-6...2/IMG_2860.JPG https://lh3.googleusercontent.com/-s...2/IMG_2861.JPG https://lh3.googleusercontent.com/-V...2/IMG_2862.JPG |
Re: Metal Excavator - Magom HRC MG1.4
Looks like fun and should be great fun when you get it running! Thanks for the pics!
Jim |
Re: Metal Excavator - Magom HRC MG1.4
Well rained tonight so no chance of any more painting :TD
But I did make some progress. Put tracks back on the base https://lh3.googleusercontent.com/-S...2/IMG_2903.JPG Installed a better slip ring https://lh3.googleusercontent.com/-U...2/IMG_2907.JPG https://lh3.googleusercontent.com/-i...2/IMG_2908.JPG And here's the new along side the original slip ring https://lh3.googleusercontent.com/-V...2/IMG_2909.JPG The excavator base attached to the track body. At this point I decided to add some lock thread to the bolts holding it all together. https://lh3.googleusercontent.com/-C...2/IMG_2910.JPG Reconnected the motors https://lh3.googleusercontent.com/-F...2/IMG_2911.JPG Quick test of the wiring https://lh3.googleusercontent.com/-G...2/IMG_2912.JPG And thats all for tonight. |
Re: Metal Excavator - Magom HRC MG1.4
Good looking machine
|
Re: Metal Excavator - Magom HRC MG1.4
Hey, thanks for posting!
Magom has really upped their game since about a year ago. I've completely forgotten about them. They have a beefy looking hydraulics kit for the Carson LR634 crawler loader. I've been looking to upgrade the cylinders in my model. That's a nice excavator! Thanks for sharing. |
Re: Metal Excavator - Magom HRC MG1.4
Quote:
|
Re: Metal Excavator - Magom HRC MG1.4
hr7 - what is that in terms of ml/revolution?
|
Re: Metal Excavator - Magom HRC MG1.4
Not certain. On the Premacon website the hr7 pump States 900ml per minute.
|
Re: Metal Excavator - Magom HRC MG1.4
|
Re: Metal Excavator - Magom HRC MG1.4
Wow nice, any updates on the build?
|
Re: Metal Excavator - Magom HRC MG1.4
Quote:
|
Re: Metal Excavator - Magom HRC MG1.4
so by chance can you tell us where you purchased that nice slip ring from?
|
Re: Metal Excavator - Magom HRC MG1.4
Quote:
http://www.dx.com/p/wind-turbine-6-w...4#.VdWRXH3i92Y |
Re: Metal Excavator - Magom HRC MG1.4
Started to put primer on other bits now
https://lh3.googleusercontent.com/-s...2/IMG_2940.JPG went back to the base and painted a bit orange https://lh3.googleusercontent.com/-g...2/IMG_2942.JPG https://lh3.googleusercontent.com/-K...2/IMG_2943.JPG Added the vibration mounts to pump https://lh3.googleusercontent.com/-1...2/IMG_2941.JPG Whilst waiting between paint coats, started setting up the electronics. https://lh3.googleusercontent.com/-q...2/IMG_2944.JPG |
Re: Metal Excavator - Magom HRC MG1.4
thankx much appreciated. loving the colors to. i will be going to the local tractor dealer for hitachi orange! love it!
|
Re: Metal Excavator - Magom HRC MG1.4
Quote:
https://lh3.googleusercontent.com/-V...2/IMG_2945.JPG https://lh3.googleusercontent.com/-4...2/IMG_2946.JPG https://lh3.googleusercontent.com/-3...2/IMG_2947.JPG |
Re: Metal Excavator - Magom HRC MG1.4
Out of a matter of interest. Did you get all the plastics in the kit too? Windows and interior??
|
Re: Metal Excavator - Magom HRC MG1.4
No it was just the metal shell. Can buy the interior separately but I didn't see that until after I ordered. Going to have a go at making my own interior.
|
Re: Metal Excavator - Magom HRC MG1.4
Tonight been doing more painting.
First I wet and dry the bits to remove some of the roughness etc, then assembled the boom and bits https://lh3.googleusercontent.com/-2...2/IMG_2988.JPG Several more coats of paint https://lh3.googleusercontent.com/-G...2/IMG_2992.JPG Next. Made a bracket to hold the slip ring in position and help keep pipes and wires out of the slew gears https://lh3.googleusercontent.com/-e...2/IMG_2990.JPG Added servos to the valve unit https://lh3.googleusercontent.com/-h...2/IMG_2989.JPG Pump & valves secured to the base https://lh3.googleusercontent.com/-G...2/IMG_2991.JPG Played around with internal setting out https://lh3.googleusercontent.com/-r...2/IMG_2993.JPG |
Re: Metal Excavator - Magom HRC MG1.4
ive got a bit of a problem with mine cause i built it from scratch and i have alot of support brackets going threw the center which took up all of my space. right now i am debating on switching to m5 fittings from m3. my rc4wd valve is all m5 the rest of my stuff is m3.
|
Re: Metal Excavator - Magom HRC MG1.4
What controller and reciever are you using as im looking at buying one ?
Is the quality good for being cheap compared to the other models out on the market ? |
| All times are GMT -4. The time now is 03:13 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.