5 ton brass/copper build
 

I started this build almost 2 yrs ago:eek: I am nearing the end and thought I would share it with you guys. I have also been building another cab for a fella on the board I started the build on as a thanks it to is almost finished.
I will only post pics no text,just want to get you guys up to speed as to where im at on this currently and then I will post updates as I go..

http://i180.photobucket.com/albums/x...R/105_0225.jpg

http://i180.photobucket.com/albums/x...R/105_0221.jpg

http://i180.photobucket.com/albums/x...R/105_0217.jpg

http://i180.photobucket.com/albums/x...R/105_0210.jpg


http://i180.photobucket.com/albums/x...R/105_0209.jpg

http://i180.photobucket.com/albums/x...R/105_0256.jpg

http://i180.photobucket.com/albums/x...R/105_0256.jpg

http://i180.photobucket.com/albums/x...R/105_0269.jpg

http://i180.photobucket.com/albums/x...R/105_0264.jpg

Re: 5 ton brass/copper build
 

http://i180.photobucket.com/albums/x...R/105_0284.jpg

http://i180.photobucket.com/albums/x...R/105_0285.jpg

http://i180.photobucket.com/albums/x...R/105_0301.jpg

http://i180.photobucket.com/albums/x...R/105_0303.jpg

http://i180.photobucket.com/albums/x...R/105_0302.jpg

http://i180.photobucket.com/albums/x...R/105_0314.jpg

http://i180.photobucket.com/albums/x...R/105_0319.jpg

http://i180.photobucket.com/albums/x...R/105_0325.jpg

http://i180.photobucket.com/albums/x...R/105_0317.jpg

http://i180.photobucket.com/albums/x...R/105_0609.jpg

http://i180.photobucket.com/albums/x...R/105_0611.jpg

http://i180.photobucket.com/albums/x...R/105_0624.jpg

http://i180.photobucket.com/albums/x...R/105_0622.jpg

Re: 5 ton brass/copper build
 

http://i180.photobucket.com/albums/x...R/105_0639.jpg

http://i180.photobucket.com/albums/x...R/105_0646.jpg


http://i180.photobucket.com/albums/x...R/105_0644.jpg


http://i180.photobucket.com/albums/x...R/105_0648.jpg


http://i180.photobucket.com/albums/x...R/105_0649.jpg

http://i180.photobucket.com/albums/x...R/105_0652.jpg


http://i180.photobucket.com/albums/x...R/105_0634.jpg

Re: 5 ton brass/copper build
 

http://i180.photobucket.com/albums/x...R/105_0661.jpg

http://i180.photobucket.com/albums/x...R/105_0662.jpg

http://i180.photobucket.com/albums/x...R/105_0663.jpg

http://i180.photobucket.com/albums/x...R/105_0664.jpg


http://i180.photobucket.com/albums/x...R/105_0690.jpg

http://i180.photobucket.com/albums/x...R/105_0693.jpg

http://i180.photobucket.com/albums/x...R/105_0706.jpg

http://i180.photobucket.com/albums/x...R/105_0702.jpg

http://i180.photobucket.com/albums/x...R/105_0688.jpg

http://i180.photobucket.com/albums/x...R/105_0687.jpg

http://i180.photobucket.com/albums/x...R/105_0684.jpg

Re: 5 ton brass/copper build
 

http://i180.photobucket.com/albums/x...R/105_0721.jpg

http://i180.photobucket.com/albums/x...R/105_0723.jpg

http://i180.photobucket.com/albums/x...R/105_0723.jpg


http://i180.photobucket.com/albums/x...R/105_0738.jpg

http://i180.photobucket.com/albums/x...R/105_0745.jpg

http://i180.photobucket.com/albums/x...h_105_0762.jpg

http://i180.photobucket.com/albums/x...R/105_0821.jpg

http://i180.photobucket.com/albums/x...R/105_0820.jpg

Re: 5 ton brass/copper build
 

http://i180.photobucket.com/albums/x...R/105_0832.jpg

http://i180.photobucket.com/albums/x...R/105_0831.jpg

http://i180.photobucket.com/albums/x...R/105_0839.jpg

http://i180.photobucket.com/albums/x...R/105_0865.jpg

http://i180.photobucket.com/albums/x...R/105_0870.jpg

http://i180.photobucket.com/albums/x...R/105_0859.jpg

http://i180.photobucket.com/albums/x...R/105_0862.jpg

http://i180.photobucket.com/albums/x...R/105_0875.jpg

http://i180.photobucket.com/albums/x...R/105_0875.jpg

http://i180.photobucket.com/albums/x...05_0938_00.jpg

http://i180.photobucket.com/albums/x...R/105_0940.jpg

http://i180.photobucket.com/albums/x...R/105_0941.jpg

http://i180.photobucket.com/albums/x...R/105_0943.jpg

Re: 5 ton brass/copper build
 

http://i180.photobucket.com/albums/x...R/105_0983.jpg

http://i180.photobucket.com/albums/x...R/105_0985.jpg

http://i180.photobucket.com/albums/x...R/105_0986.jpg

http://i180.photobucket.com/albums/x...R/105_1007.jpg

http://i180.photobucket.com/albums/x...R/105_0825.jpg

Re: 5 ton brass/copper build
 

Very nice metal work, excellent!!!
And your attention to detail is supurb.
Can't wait to see more.

Big John

Re: 5 ton brass/copper build
 

Dig it for sure!

Re: 5 ton brass/copper build
 

Very cool! A very ambitious build, with excellent craftsmanship!

Brian

Re: 5 ton brass/copper build
 

thanks guys, The one pic with a black car hood in the background is a video,just click the pic to see it..

Re: 5 ton brass/copper build
 

All I can say is WOW

Ken

Re: 5 ton brass/copper build
 

wow nice work on the copper body and the atention to details ia great too, nice articulation on the susspension, excellent build

Re: 5 ton brass/copper build
 

Re: 5 ton brass/copper build
 

Wow!!!!!!!!!
Outstanding!!!

Re: 5 ton brass/copper build
 

Great build:D I love working with brass and copper. Just not into body work though:rolleyes: That is one of my next projects:eek:

Re: 5 ton brass/copper build
 

Best build ever! I always drool over this one, at Scale 4x4, and have been watching it closely on that forum! Nice to see you bring it over here to share. You have a ton of talent and patience!

Re: 5 ton brass/copper build
 

Absolutely Great! Did you also built the axles?

Kerst

Re: 5 ton brass/copper build
 

Thank you Ken.

Thanks for the complement Sir.

thanks for having me!!

thanks

Thanks I have seen your avatar build and I have no doubt you will pull off any build you try with great success.

thank you,
Thank you , No I did not build the axles they are from RC4WD..

Re: 5 ton brass/copper build
 

Wow, nice work! Do you use a torch, soldering iron or resistance soldering iron? How do you decide whether to use brass or copper? Or, put another way, why use copper at all - is it better for shaping for curves?

Richard

Re: 5 ton brass/copper build
 

I use both a torch and a stainglass soldering iron with silversolder and some type of brazing solder not sure the brand but I get it at tractor supply.

I use the copper in areas where where I have compound curves.

Re: 5 ton brass/copper build
 

finished the pass side and started on the front bumper..
http://i180.photobucket.com/albums/x...0ton/002-2.jpg

I looked all over the place for a spacer and decided on a piece of oak.
http://i180.photobucket.com/albums/x...0ton/003-2.jpg

http://i180.photobucket.com/albums/x...0ton/004-2.jpg

http://i180.photobucket.com/albums/x...0ton/005-2.jpg

do you guys think I should move the front axle forward a bit??Im kinda on the fence about it.
http://i180.photobucket.com/albums/x...%20ton/007.jpg

it will be sitting a little higher as well.

Re: 5 ton brass/copper build
 

Doh!!!!!I posted these pics in the wrong thread,,**** noob LOL..

Re: 5 ton brass/copper build
 

Awesome copper work. This is gonna be an awesome build when you are done!

Re: 5 ton brass/copper build
 

Outstanding build!
Starting from scratch and realizing that level of details in brass (+copper) is simply amazing for almost "newbies" like me (and probably for more experimented builder also ;))
Can't wait to see next steps :cool:

Gaetan

Re: 5 ton brass/copper build
 

HOLY Captain Crunch BatMan :eek::eek:, that thing is sick!!!! You have mad-skills for sure. Great job on the 5T

Re: 5 ton brass/copper build
 

Yeah, that looks like you have about 5 tons of brass and copper into it! Just beautiful fabrication throughout. Dan

Re: 5 ton brass/copper build
 

Oh my God, that thing is incredible!! I know you have heard this already, but wow, you have some serious skill and clearly a shed load of time and most importantly - patience. It's really amazing to see what can be done with some brass, copper and solder if you have the skill set and imagination.
Well done and keep up the great work!

Re: 5 ton brass/copper build
 

Nice job on the metal forming! You are quite the tin knocker!
By the looks of the front tires,you won't need to add no weight to this baby for traction.
Can't wait to see her done!
FGD

Re: 5 ton brass/copper build
 

thanks for all the encouraging words! you correct Freddy I have no need for additional weight on this thing but I do think Im going to be in need of some beadlocks..

Managed a little time this morning.
Started on the inner fender(driver side) .I had been over thinking this entire process,I couldnt wrap my head around how to make the louvers so I just went into the basement and started looking through my punches and chisles but none of them looked like what I needed then I came across a wood chisle and it looked perfect. I triyed to make it from all brass but it was to hard to get a smooth cut. So I cut the louvers into copper and then installed it into the brass

http://i180.photobucket.com/albums/x...0build/006.jpg

http://i180.photobucket.com/albums/x...0build/007.jpg

http://i180.photobucket.com/albums/x...0build/008.jpg

http://i180.photobucket.com/albums/x...0build/010.jpg

http://i180.photobucket.com/albums/x...0build/011.jpg

I hope to build the pass side and the steering shaft tomorrow morning..

Re: 5 ton brass/copper build
 

built the passenger side this morningand finished the air canister and made the mounting points for the roof.
http://i180.photobucket.com/albums/x...uild/006-1.jpg

http://i180.photobucket.com/albums/x...uild/007-1.jpg

http://i180.photobucket.com/albums/x...uild/008-1.jpg

http://i180.photobucket.com/albums/x...uild/009-1.jpg

http://i180.photobucket.com/albums/x...uild/010-1.jpg

http://i180.photobucket.com/albums/x...uild/011-1.jpg

http://i180.photobucket.com/albums/x...0build/012.jpg

http://i180.photobucket.com/albums/x...0build/013.jpg

http://i180.photobucket.com/albums/x...uild/015-1.jpg

Re: 5 ton brass/copper build
 

This is an excellent build! Your craftsmenship is one of a kind. Keep up the great work!
Scott
Btw. What are the drill bits for in ur drive train? Seen them in the earlier pics

Re: 5 ton brass/copper build
 

love it! by the time your done with this build you wouldnt be able to tell the difference between your truck and the real deal! excellent build cant wait to see it finished

Re: 5 ton brass/copper build
 

Thank you,The drill bits were their just for a quick testdrive ot two. I have since replaced them with 3/8 solid rod.


Thank You, I want to include as many details as I can handle but its killing me not being able to drive this thing....Its been 2 years so far,,,

Re: 5 ton brass/copper build
 

Very nice fab work.!

Re: 5 ton brass/copper build
 

OMG That's incredible, You sir are very talented.

Re: 5 ton brass/copper build
 

Simply stunning work. The details you've added just enhance everything. This is one of those models that look good anyway it's finished, painted or simply cleaned up and raw. My hats off to you sir!

Re: 5 ton brass/copper build
 

she's a monstar!!

Re: 5 ton brass/copper build
 

yea the wheight on this thing is crazy, but I think it will add to the realism once its driving...But the down side is I have to get some beadlocks so the tires stay on the rims.

Re: 5 ton brass/copper build
 

Wow! The louvered underside/inner fender pieces look incredible. It looks like you have spared no detail on this build. The more you add, the better it gets! I don't know what my problems is. Ha! I've been building a truck for 4 years and haven't much to show for it, and it's mostly a bolt together affair! You've done way more in 2 years then I have, and it's almost all from scratch.