Bruder Liebherr loader build
 

Starting on the loader,have a long way to go on it.Already have a few parts.
Using the same 6 channel transmitter as on my hobby engine excavator,just ordered a extra reciever a while back.Have to order two more gear motors,and the servos,a little at a time,lol.
Started on the front portion,using 22 guage sheet metal.Will be using screwdrives.Going to make a scratch built boom next.Trying to get the front portion done,then the rear.Have some more wheels I may use,see how it goes.Have a few pics so far.

Re: Bruder Liebherr loader build
 

Few more pics

Re: Bruder Liebherr loader build
 

looking good so far. Can't wait to see it working along side your excavator.

Re: Bruder Liebherr loader build
 

Thankyou Pumptech. I have been looking everywhere for a detailed conversion on the Bruder Loader. I can't wait to see how you do it..

Re: Bruder Liebherr loader build
 

Although after looking at your pictures I know I do not have the necessary metal skills that you have and will have to devise a way to do a conversion with the existing plastic. Or JB Weld enhanced plastic lol.

Re: Bruder Liebherr loader build
 

Thanks mazdaparts
Hope the pics look ok,had to take with my phone,something happened to my camera,must have gotten dropped,doesn't work,may be awhile for some vids,until I replace it.

Re: Bruder Liebherr loader build
 

Thanks Mike
The rear section of the model is going be a little tricky with the swivel axle,have a few ideas already.

Re: Bruder Liebherr loader build
 

Try to keep it light. My track loader is just about the limit on what the actuators can move.

Re: Bruder Liebherr loader build
 

Cool project Neil! It will be fun watching this come together.

Re: Bruder Liebherr loader build
 

Yes, I agree. Neat looking project, and I can appreciate your metal fabrication skills. The front half of the loader is looking good, rebuilt with metal. I would like to see some larger photos, if it's possible. Your pictures are a little on the small side. Keep it up!

Re: Bruder Liebherr loader build
 

Thanks ,going to try to.:)

Re: Bruder Liebherr loader build
 

Thanks Smallhaul,there's a lot of parts to make for it.
Who's Neil ?
Talk to you later ,Tommy

Re: Bruder Liebherr loader build
 

Thanks for the compliments,I've tried to upsize the pics ,480x360 pixels is as large as it will let me for some reason..I'll look into it some more.

Re: Bruder Liebherr loader build
 

Sorry Tommy! I thought I read Your name was Neil.

I would like to see larger pics as well.

Re: Bruder Liebherr loader build
 

LOL! Did somebody call me?

Hey Pumptech, I'm the one with the Kyosho Hanomag loader manual, if you want a copy, pm me. Richard/vanisle & Travis have copies already for screw drive idea's.

Look's like a neat project. Cheer's, Neil.

Re: Bruder Liebherr loader build
 

I wonder if your screw drives could be made to be used for the turning rams.

Re: Bruder Liebherr loader build
 

Hey Thanks Neil
Thanks for offering ,going to try the auger bit method first,same as my excavator,see how that goes,seem to get good power from them.If that doesn't work may have to give you a ring,thanks again.:)
Tommy

Re: Bruder Liebherr loader build
 

Hey Mike ,I thought about that,was leaning more on using a high torque servo with linkages.Have played around with sliming the screwdrives down,leaving off the 1/2 SST ,using 3/8 and 1/4 ,with a smaller auger bit that fits in the 1/4.Then of course have to keep space in mind for the battery/electrical gear.

Re: Bruder Liebherr loader build
 

Hey guys this post was mainly to check pic size,looks bigger on my end.
Little progress tonight,got a couple of the boom arms cut out so far,its a slow go.

http://img707.imageshack.us/img707/6127/loader10.jpg

Uploaded with ImageShack.us

Re: Bruder Liebherr loader build
 

Little progress on the front portion,the boom looks a little rough right now,just tacked together,wanted to get the screwdrives made ,check things before i weld it out,got the bucket linkage made, have to tack down,hope to have the boom/bucket working soon..
http://http://img411.imageshack.us/img411/4667/loader12.jpg
http://http://img249.imageshack.us/img249/2803/loader11.jpg
http://http://img221.imageshack.us/img221/2782/loader16f.jpg
http://http://img694.imageshack.us/img694/5642/loader15.jpg

Re: Bruder Liebherr loader build
 

Well,I had a little setback on the boom, wasn't going to reach max hieght, the way I was going with it,with the servo incased in the front portion,had to come up with plan B ,reverse it ,put the servo in the boom,have the new boom tacked together,got the rams made,seems to work much better now ,has good lifting power with just the one ram,will be using two though,now onto getting the bucket going.:D
Have a few pics and vid.
http://http://img841.imageshack.us/img841/324/loader18.jpg
http://img215.imageshack.us/img215/9747/loader17.jpg
http://www.youtube.com/watch?v=ds87p...el_video_title

Re: Bruder Liebherr loader build
 

Well,little update on the loader,been working on the swivel for the middle,rear section,now on to mounting the rear axle.Forgot to take a pic of the bottom of the model,but have metal tied in to the bottom,will get that pic on the next post.
http://http://img163.imageshack.us/img163/1841/loader23.jpg
http://img97.imageshack.us/img97/6010/loader22.jpg
http://img196.imageshack.us/img196/5900/loader21.jpg
http://http://img208.imageshack.us/img208/5416/loader20.jpg
http://img404.imageshack.us/img404/9494/loader19.jpg

Re: Bruder Liebherr loader build
 

Well , getting a little futher with the loader,got the rear axle mounted up,thought about using one servo with a linkage,thought about it some more,decided to try screwdrives,works well,took apart one of the servo's,desoldered wires on the motor,changed postions of wires,soldered back,to get the push/pull for the screwdrives.
I know my metal work looks pretty bad right now,just getting it all mocked up/tacked together,once I have it mocked up,going to take it all back apart and finish welding everything up,grinding down all smooth.
Have a few more pics and vid.
Thanks for looking
http://img831.imageshack.us/img831/3153/loader24.jpg
http://img827.imageshack.us/img827/8462/loader25.jpg
http://img37.imageshack.us/img37/7329/loader26.jpg

http://www.youtube.com/watch?v=xfB5a...el_video_title

Re: Bruder Liebherr loader build
 

looking good .........keep it comming

Re: Bruder Liebherr loader build
 

Thanks chaseracer,still have a long way to go with it,thanks again.:)

Re: Bruder Liebherr loader build
 

Clever way to steer it!
Cheer's Neil.

Re: Bruder Liebherr loader build
 

Thanks doodlebug
Little update on the loader got the motors in and installed,have some more wheels with better grip I may use but the rims need some mods.
Few more pics of the finshed metal work and vid
Thanks for looking.
http://img713.imageshack.us/img713/7941/loader51.jpg
http://img694.imageshack.us/img694/7550/loader50.jpg
http://www.youtube.com/watch?v=BfrWr...el_video_title

Re: Bruder Liebherr loader build
 

Well, need to order 3 more servo's for the rams for the boom/bucket.Been working on the rear plastic section ,getting the battery in,it fit like a glove.
Cut out some the unneeded plastic to make room for the electronics.
Going to cut off the long bolt from the wheel and replace the hex nuts with some cap nuts.
Few more pics
http://img508.imageshack.us/img508/7896/loader55.jpg
http://img507.imageshack.us/img507/9095/loader56.jpg
http://img109.imageshack.us/img109/5015/loader57.jpg
http://img24.imageshack.us/img24/2770/loader58.jpg
http://img52.imageshack.us/img52/73/loader59.jpg
http://img27.imageshack.us/img27/5397/loader60.jpg

Re: Bruder Liebherr loader build
 

Well little update,this as been quite a slow build,no rush though ,lol :D
Finally got all the parts in I had on order,Have gotten it primed and painted,now to just get it all back together.Hope to have the loader going soon
Few more pics.
http://img688.imageshack.us/img688/1931/loader61.jpg
http://img12.imageshack.us/img12/9269/loader62.jpg
http://img109.imageshack.us/img109/3582/loader63.jpg
http://img857.imageshack.us/img857/3909/loader64.jpg

Re: Bruder Liebherr loader build
 

Looks good! We can't wait to see it rippin around! What rpm and torque are your gear motors?

Reg

Re: Bruder Liebherr loader build
 

Hey Reg ,thank you very much ,should have it running soon.I have to say I'm very pleased with the strenght of the screwdrive rams,quite powerfull.
Ran the boom/bucket up and down /bucket today ,works great.
I am using these motors from robotmarket place,with the battery I'm using ,motors should be around 250 oz of torque.Around 150 RPM


http://www.robotmarketplace.com/products/0-BHG31.html

Re: Bruder Liebherr loader build
 

Heavy duty Bruderism, great!
Is the screw drive an adapted hand-drill? One of those that you push with your hand - sometimes called Archimedean Drill? I think they might be much smoother than drill bits, as they are actually designed to be used for a drive (and not cutting).

Re: Bruder Liebherr loader build
 

Hey Jensr Thanks
Just using a regular style masonary bit 1/4" ,been using this style for awhile have good luck with them.The Archimedean Drill would probaly work better,but mabey hard to find in my area,lol .Can't beat the price of the one's i'm using now ,around 3 to 5 bucks a bit.:D
Is this what your were referring
pic to follow

Re: Bruder Liebherr loader build
 

Re: Bruder Liebherr loader build
 

Hey Tamiya cowboy
Thank you very much ! Now the fun part ,all of the electrical to get wired up and stuffed inside.Should have it going on the next post update.:D

Re: Bruder Liebherr loader build
 

I would like to give a big thanks to whomever voted to make this a 5 star thread.
Thank you very much!!:)

Thanks everyone for all the postive comments:D


Finally got the loader together,the build went okay ,I guess ,had a few set backs on it.First tried to build the boom just like the factory boom,but wasn't going to get full hieght ,had to resort to plan b ,reverse it and put the servos in the boom.
Few more pics of the finshed model.
Will try and get a vid up real soon.
http://img16.imageshack.us/img16/9919/loader80.jpg
http://img804.imageshack.us/img804/5835/loader81.jpg
http://img708.imageshack.us/img708/710/loader82.jpg

Re: Bruder Liebherr loader build
 

Wow! That really looks nice.

Great job. I can't wait to see some vids.

Re: Bruder Liebherr loader build
 

Thanks Scott

Was able to get a vid in today of the loader running some,only have less than 30 min run time on it,still have to get use to the controls
Video of the loader ,may want to lower the volume,kinda loud :o


http://www.youtube.com/watch?v=qjp_s...el_video_title

Re: Bruder Liebherr loader build
 

Pumptech-looks like the loader turned out really nice! Good job. Tough digging in that drive-way huh!:D

Re: Bruder Liebherr loader build
 

Hey thanks modelman :) , yea,the wet packed sand was a little tough,should work well with loose dirt and potting soil,mostly what I use at home.