Idea for something to do at truck shows. Truck Pulling
 

I was wandering if anybody would be interested in building pulling trucks to have truck pulls at the shows. Here is what I am thinking.

: Stock Tamiya truck axles, trans, suspension

: Tires of tires and rims but must be same size as stock, ex. RC4WD roadys or the fulda cross-force.

: Motors no bigger than 540 size can. Brushed or brush-less

: Gear reduction is builders choice

: Frame rails no longer than the longest stock rails in a kit which I think are either the Knight hauler or Aeromax. Frame rails can be aftermarket just have to meet the length limits.

: The sled and hitch will be provided and all competitors will use the same hitch.

All ideas and comments are welcome.

Travis

Re: Idea for something to do at truck shows
 

The weight of the truck is key. You could have two weight classes.

That would be cool though.

Re: Idea for something to do at truck shows
 

Re: Idea for something to do at truck shows
 

Definitely and after pulling my Aeromax a few times the trucks need weight over the axle so the hitch will have a weight box made on it so all of the trucks will have the same amount of weight add over the axles.

Now agreeing on a weight class will be the next thing. I say for the stock class it should be the weight of a knight hauler + 1lb

Travis

Re: Idea for something to do at truck shows
 

So for classes I can think of three.

Stock: no gear reduction, stock motor, non computerized brushed only esc

Super stock: gear reduction and any brushed motor and brushed only esc

Modified: unlimited only stock parts are stock trans axles

Travis

Re: Idea for something to do at truck shows
 

Aww that means big mack can't compete :( I'll even weight it down more :p

Re: Idea for something to do at truck shows
 

Re: Idea for something to do at truck shows
 

That is a good idea it would allow for aluminum rims deck plates John's stacks etc.

Travis

Re: Idea for something to do at truck shows
 

Sounds like a good idea.

Brian

Re: Idea for something to do at truck shows
 

Why not try doing something constructive? like take that dirt pile over there & build some roads, or a runway up to an overpass.

Build a quarry site complete with a jaw crusher, conveyers, screening plant... crush road gravel into scale road gravel.

Lots of you guys now with newly build dump trks, put 'em to work!

Try working together to do something constructive instead of competing against one another to be individuals.

Re: Idea for something to do at truck shows
 

Hey Steve, In my antique machiney club, it's "Exhibtion Class" Have fun:D
Later, Neil.

Re: Idea for something to do at truck shows
 

I think it's a cool idea. I've always enjoyed truck, tractor, and semi truck pulls.

Someone is going to have to design and build a good pulling sled though. It would be neat to keep the sled scale looking, but many times the best and functional sleds are anything but scale. It's just bragging rights in the end anyway. No one is going to care what the sled looks like, as long as it performs the same with every hook.

Re: Idea for something to do at truck shows
 

We are working on getting one drawn up right now and we would like to make it as scale looking as possible but still be functional and reliable.

We do stuff like that at the shows but not everybody is into that. Many of us do full size tractor and truck pulling and would find doing it with scale models just as enjoyable. In the 1:1 pulling we are a family, we go out to eat together, help each other get there tractors ready including wrenching on them if need be and we celebrate each others accomplishments at a banquet at the end of the year. It is not just about the competition it is about the friendship and the enjoyment we get out of it.We are also trying to offer things to do that will get more people exited about the hobby and we had a lot of interest in the truck pulling at the Jackson Tenn. show. There were quite a few people that thought the equipment was neat but were more interested in the truck pulling.

Travis

Re: Idea for something to do at truck shows
 

Re: Idea for something to do at truck shows
 

Great explanation Travy, I hope it becomes an exciting attraction for everyone to participate within. :cool:

Re: Idea for something to do at truck shows
 

I think this would be a great thing to do at shows and such. It will get lots more attention and spectators will hang around a while. You might get more participants as well.

Re: Idea for something to do at truck shows
 

i like this - the exhibition class could be great for those with odd set ups who just want to have fun too .....

Re: Idea for something to do at truck shows
 

I like it, maybe this is how I can get my dad back into the hobby. He used to pull in the early 80s with bruisers and clod busters. Been meaning to get him a truck anyway.

Re: Idea for something to do at truck shows
 

Here is a pic of the sled I built about 15 years ago. We use to pull stock 2wd trucks and buggies. I liked pulling my old RC10 and then I got a Stampede back when traxxas still made kits and it was just a blast to run. This thing worked great till we got the EMaxx's the poor sled didn't stand a chance. The sled is still usable and works good it's just not real pretty.

http://i574.photobucket.com/albums/s...4/100_1105.jpg

Travis

Re: Idea for something to do at truck shows
 

These are cheap..... ;)

http://www.outlawhobbie.com/product_...oducts_id/6659

Re: Idea for something to do at truck shows
 

That is a nice sled but I hope Izzy and I can come up with something for less money.

Travis

Re: Idea for something to do at truck shows
 

Thank's for the Link!

Re: Idea for something to do at truck shows
 

I think the pulling competiton would be a neat new addition to our hobby.

Re: Idea for something to do at truck shows
 

Travis you could make that sled work. Just change the rear tires out to some semi duallies for looks and make the skid smaller for more friction. Maybe a bigger weight box.

Re: Idea for something to do at truck shows
 

this is really great and would make a great addition to the hobby :)

is there a finial set of rules now?

Re: Idea for something to do at truck shows
 

I don't think we have any thing solid yet and the way I look at it there is no prize money or a trophy so run what you brung and hope you brung enough.:D

Travis

Re: Idea for something to do at truck shows. Truck Pulling
 

We are working on a sled design now and hopefully we can have something for this summer but if all else fails I can do some work on the one I have till we get a better one.

Travis

Re: Idea for something to do at truck shows. Truck Pulling
 

This sounds interesting...
But a couple of questions;

How would you get consistent weight for traction on every participants truck?
A box holding a predetermined weight that hooks into the truck's 5th wheel?

And what about a consistent height pulling hitch for every participant?
Something that clips onto the rear of the frame, or rear Xmember?

Not everyone showing up at a show will have their truck set up for pulling...
Having a truck weight box and pulling hitch assembly along with the sled will allow anyone to participate.

Just my thoughts.

Re: Idea for something to do at truck shows. Truck Pulling
 

Thanks for the input and you are right Jim and that is what we have been considering building a hitch that is also a weight box and all 0f the trucks will pull from their fifth wheel. Basically a weight box and hitch all in one with a padded u shaped bracket to keep the hitch square with the frame and the padding so guys with deck plates wont have them marked up and all can play.

Travis

Re: Idea for something to do at truck shows. Truck Pulling
 

Hi guys. I know that I'm way out in California, but I've given events some long thought for some time now and I've a couple of ideas that you may already be using. If you aren't you might like to entertain them.

My first idea was that at any event, the public would feel more involved if there was a public truck show where they could vote on their favorite choice for best show. Then at the end of the event have an announcement of the top three winners.

My second idea was to have competitions based on the CDL driving test required by the DMV. It would involve at least three events: 1) Parallel Parking where you have to back the trailer into a space at a 90-degree, 2) Making a Right-hand-turn as close to the cone as possible without hitting the cone, and 3) Straight Backing between a set of at least six cones, three on each side of the trailer without hitting any of them, and one at the very back without backing over it.

The judging could be based on a point system. It shouldn't be hard to work out the details if you were interested. I'm sure that it would be great fun in addition to the truck-pulling competition.

RCT

Re: Idea for something to do at truck shows. Truck Pulling
 

I love both ideas for truck pulling, and for the driving competition! I would probably (if they do this at Indy) bring my CR01 crawler just for laughs, and I was thinking about how much practice I am gonna need for my first semi when I finally get it done. Something I would love to watch from the experienced guys.

Re: Idea for something to do at truck shows. Truck Pulling
 

Thanks for bringing this up as the East Coast guys have done both. The truck driving competition is always good for a laugh and the voting for the truck is also a lot of fun. Both of these are great ideas to bring the participants and the public together and have a good time.

Travis

Re: Idea for something to do at truck shows. Truck Pulling
 

here is a video of some truck pulling like i think you are talking about ,with the fifth wheel hook-up

http://youtu.be/lev07wJ3JkQ

Re: Idea for something to do at truck shows. Truck Pulling
 

and here is a video of trucks pulling a simple sled full of concrete blocks

http://youtu.be/AUaAQLv0tPU

don't need a fancy sled lol

Re: Idea for something to do at truck shows. Truck Pulling
 

Are there any updates on this? After I finished reading all the awesome ideas I couldnt stop myself from smiling!

Re: Idea for something to do at truck shows. Truck Pulling
 

Id prob do it! Sounds fun! And would definitely be an attention Getter

Re: Idea for something to do at truck shows. Truck Pulling
 

Here are some pics of the prototype Izzy built.

http://i574.photobucket.com/albums/s...4/100_1608.jpg

http://i574.photobucket.com/albums/s...4/100_1609.jpg

http://i574.photobucket.com/albums/s...4/100_1610.jpg

Travis

Re: Idea for something to do at truck shows. Truck Pulling
 

Really nice. Great job Izzy.

Re: Idea for something to do at truck shows. Truck Pulling
 

Looks pretty good

Re: Idea for something to do at truck shows. Truck Pulling
 

Got to witness the testing, you guys are in for a treat. I say worst case, get yourself a box-stock rig just for this if you don't have anything that will pull. Gonna be a blast!