RC Truck and Construction

Page 1 of 3

Show 40 post(s) from this thread on one page

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- Highway Trucks and Trailers (https://www.rctruckandconstruction.com/forumdisplay.php?f=3)

- - IH 9670 COE (https://www.rctruckandconstruction.com/showthread.php?t=5420)

Tamiya Cowboy

10-27-2012 08:59 PM

IH 9670 COE

Well I normally have more done before I post a truck but since the parts will be soon on there way I thought I would post what I had.. Going to be a 9670 single bunk...

More to come..

http://i58.photobucket.com/albums/g2...cks/003-14.jpg

russisloud

10-27-2012 09:45 PM

Re: IH 9670 COE

i bet your about ready to explode :D:eek:

http://i335.photobucket.com/albums/m...py-happy-1.jpg

Tamiya Cowboy

10-28-2012 09:58 AM

Re: IH 9670 COE

Quote:

Originally Posted by russisloud (Post 68537)

i bet your about ready to explode :D:eek:

http://i335.photobucket.com/albums/m...py-happy-1.jpg

AM I? READY KIDS!

You stop joking around and get back to your mill!!:D

PRminitrucker

10-28-2012 02:58 PM

Re: IH 9670 COE

Stimpy you idiot ! Lol sorry just had to say it! Tamiya cowboy did you make that chassis? How long is it?
Thanks
Billy

Tamiya Cowboy

10-28-2012 03:33 PM

Re: IH 9670 COE

Quote:

Originally Posted by PRminitrucker (Post 68643)

Stimpy you idiot ! Lol sorry just had to say it! Tamiya cowboy did you make that chassis? How long is it?
Thanks
Billy

LOL:D... Yeah i did it is 22 inches long wheel base in 1:1 is 217

Tamiya Cowboy

10-28-2012 08:52 PM

Re: IH 9670 COE

OK so my first post was pretty weak...BUT with everyone out of the house for 3hrs today I got a ton done so here it is..

Built me some fancy stack brackets out of brass.
http://i58.photobucket.com/albums/g2...icks/007-6.jpg
http://i58.photobucket.com/albums/g2...icks/006-8.jpg
http://i58.photobucket.com/albums/g2...cks/005-11.jpg

Also took a set of PVC tanks I made and made 3" long tanks for the truck.
http://i58.photobucket.com/albums/g2...cks/004-12.jpg
http://i58.photobucket.com/albums/g2...cks/003-15.jpg

Also mounted 1/4 fenders and rear flap brackets and flap brackets under the cab.
http://i58.photobucket.com/albums/g2...cks/002-16.jpg
http://i58.photobucket.com/albums/g2...cks/001-12.jpg

I am going to run my 7" stacks "sorry john 8" don't fit" and make a AC can for under the passenger side and get the tranny mounted so I can figure out the back of the cab and build a custom alum front bumper like on my KW cracker for it.. Plan on running a nice drop visor but not sure to go 5.7,9,or 11 on the cab lights yet..

plow jockey

10-28-2012 09:44 PM

Re: IH 9670 COE

Looking good!!! I really like those stack mounts. Gonna be another show stopper. Great job!!

Goose19

10-28-2012 11:18 PM

Re: IH 9670 COE

looks good tc, go 21 lights in the visor, no need for headlights then :D

ihbuilder

10-28-2012 11:59 PM

Re: IH 9670 COE

dymn , bout time someone gets that cab the way they should be ;) same with the stack brackets ;) lookin fwd to what stimpy is doin :p

jetdog

10-29-2012 08:54 AM

Re: IH 9670 COE

Cant wait to seee more im sure this will be another awesome build an the stack rack is looking the goods mate

Tamiya Cowboy

10-29-2012 05:51 PM

Re: IH 9670 COE

Quote:

Originally Posted by plow jockey (Post 68717)

Looking good!!! I really like those stack mounts. Gonna be another show stopper. Great job!!

Thanks much Fred..

Quote:

Originally Posted by Goose19 (Post 68726)

looks good tc, go 21 lights in the visor, no need for headlights then :D

Thanks much goose..

Quote:

Originally Posted by ihbuilder (Post 68733)

dymn , bout time someone gets that cab the way they should be ;) same with the stack brackets ;) lookin fwd to what stimpy is doin :p

yOu know I love the IH Cabbys steve the plan is to redo the other cabs now too..

Quote:

Originally Posted by jetdog (Post 68756)

Cant wait to seee more im sure this will be another awesome build an the stack rack is looking the goods mate

Thanks much jetdog.

dabears

10-29-2012 06:54 PM

Re: IH 9670 COE

Well Paul you know im tuned in to this one!!! Stack mounts and the cab are looking good. Now do the diffs tell of the color???? ;) IMO i say go with 9 lights bright but clean and not overkill! Just my .02

404	10-29-2012 07:36 PM

Re: IH 9670 COE

I love a good cabover, I'll be here. :D

Tamiya Cowboy

10-29-2012 11:00 PM

Re: IH 9670 COE

Quote:

Originally Posted by dabears (Post 68821)

Thanks Much aaron lots more detail to do no the axles are not the tell tail of the color sorry man.. I am thinking your right 9 lights big drop visor..

Quote:

Originally Posted by 404 (Post 68825)

I love a good cabover, I'll be here. :D

Thanks 404 I am a cab over nut myself..

russisloud

10-29-2012 11:38 PM

Re: IH 9670 COE

Quote:

Originally Posted by ihbuilder (Post 68733)

lookin fwd to what stimpy is doin :p

LOL!

Tamiya Cowboy

11-01-2012 09:35 PM

Re: IH 9670 COE

Well got a little more done on the IH built myself a custom front bumper with out getting to show truck looking "still needs to be polished".

http://i58.photobucket.com/albums/g2...cks/003-16.jpg

http://i58.photobucket.com/albums/g2...cks/004-13.jpg

And then I also got the 7" chrome turn outs made and mounted up..

http://i58.photobucket.com/albums/g2...cks/001-13.jpg

http://i58.photobucket.com/albums/g2...cks/002-17.jpg

Got a few more little things i can built for the IH so Ill try to get them finished up this weekend. I have 2 other trucks going besides the A so ill get picks of them up too.

jetdog

11-01-2012 09:42 PM

Re: IH 9670 COE

those 7 inch stacks look awesome i have to ask how you et the bends so neat under the cab ???

Tamiya Cowboy

11-01-2012 09:45 PM

Re: IH 9670 COE

Quote:

Originally Posted by jetdog (Post 69067)

those 7 inch stacks look awesome i have to ask how you et the bends so neat under the cab ???

Thanks jetdog.. I bend and make all the parts then have them chromed and fit them together.

jetdog

11-01-2012 09:52 PM

Re: IH 9670 COE

Ahh ok does that cost much ???

Tamiya Cowboy

11-01-2012 09:59 PM

Re: IH 9670 COE

They run me about 70.00 a set.

rockNmayhem

11-01-2012 11:31 PM

Re: IH 9670 COE

Paul the truck is looking great and the stacks are absolutely top notch. I can't wait to see some paint thrown at this project. Any idea of what you're going for paint scheme wise?

Tyler

Tamiya Cowboy

11-04-2012 04:27 PM

Re: IH 9670 COE

Quote:

Originally Posted by rockNmayhem (Post 69079)

Paul the truck is looking great and the stacks are absolutely top notch. I can't wait to see some paint thrown at this project. Any idea of what you're going for paint scheme wise?

Tyler

Thanks Tyler.. It is going to get a old school IH 3 color paint job just not sure what colors..

petermoblin

11-04-2012 04:43 PM

Re: IH 9670 COE

Looking great Paul. Love all the home made touches.

plow jockey

11-04-2012 04:51 PM

Re: IH 9670 COE

Nice job on the bumper and luv those stacks.I need a set of those for my ultraliner. Great job Paul!!

Supermario

11-04-2012 08:07 PM

Re: IH 9670 COE

Quote:

Originally Posted by Tamiya Cowboy (Post 69064)

Paul, very nice work!:cool: best looking COE stacks I've seen yet! :D

Hey Aaron!..... Are you seeing these stacks? I think your rig would look sweet with a set like this:D:p:eek::)

Mario

dabears

11-04-2012 09:40 PM

Re: IH 9670 COE

Quote:

Originally Posted by Supermario (Post 69349)

Paul, very nice work!:cool: best looking COE stacks I've seen yet! :D

Hey Aaron!..... Are you seeing these stacks? I think your rig would look sweet with a set like this:D:p:eek::)

Mario

Yes i do like these stacks!! Of course i saw them !! Its a cab over build :eek:

Looking sweet Paul!!!

Tamiya Cowboy

11-13-2012 08:47 PM

Re: IH 9670 COE

Thanks much Aaron..

Here is a little update with the smaller cab I have lack of room for a 3 speed so here is what I built.. It is a 3 to 1 reduction with the motor turned around now if my math is right you can go any where from 1:1 to 6:1 just by changing gears. Anyways here are the picks..

http://i58.photobucket.com/albums/g2...-05-30_618.jpg

http://i58.photobucket.com/albums/g2...-54-29_955.jpg

http://i58.photobucket.com/albums/g2...boy/004-27.jpg

http://i58.photobucket.com/albums/g2...wboy/003-9.jpg

http://i58.photobucket.com/albums/g2...boy/005-27.jpg

http://i58.photobucket.com/albums/g2...boy/006-25.jpg

Still going to be a little tight but it will work nice.. I did a different version of this tranny a few years ago on my tri axle to get the tranny in the cab due to the cat motor under the hood but this is a new and improved version of that..

dabears

11-13-2012 09:38 PM

Re: IH 9670 COE

Now that is the best space saver ever! I like it! Awesome job!

Kaf343

11-13-2012 11:02 PM

Re: IH 9670 COE

Paul, looking good. Amassing work, love the stack bracket and stacks as well.

Tamiya Cowboy

11-14-2012 07:51 PM

Re: IH 9670 COE

Quote:

Originally Posted by dabears (Post 70231)

Now that is the best space saver ever! I like it! Awesome job!

Quote:

Originally Posted by Kaf343 (Post 70247)

Paul, looking good. Amassing work, love the stack bracket and stacks as well.

Thanks much guys.. I got Russ's cross members and hanger bearing member mounted today and got the drive shafts made so this one is getting close..

BRICKNICK

11-15-2012 04:26 PM

Re: IH 9670 COE

Hey Paul I think you and Russ should put a kit together for the engine relocation kit you have there, I can see lots of guys with day cabs and cracker jack box Coe's using your motor/trans adapter kit. And your stacks look so good that I'm getting started on my globe this weekend, lol ill be ordering lots of parts now. I'm sure my wife appreciates the fact that your build has just lit a fire under my a$$ to get my globe running haha. Awesome job so far.

Tamiya Cowboy

11-15-2012 05:27 PM

Re: IH 9670 COE

Quote:

Originally Posted by BRICKNICK (Post 70370)

LOL well don't get me in trouble with your wife I do a good enough job with mine as it is..:D And it is funny you say that about the gear reduction relocation unit because they are in the works all ready so soon we should see a version on the open market ;).. And Thanks for the great comments much appreciated I'll have a small update tonight on that truck I got some more done last night and now I am on the Frieghtliner for a bit then this weekend my son has been waiting a long time but we finally will be putting his 6x6 ARMY truck together we have all the custom bits for it a so should be able to just about build that hole truck to the finish this weekend..

crawler07

11-15-2012 08:30 PM

Re: IH 9670 COE

great idea,funny thing is with these trucks you would think their would be pleanty of room but as you get further along on one of these builds the tighter it gets.

russisloud

11-15-2012 08:33 PM

Re: IH 9670 COE

Quote:

Originally Posted by BRICKNICK (Post 70370)

Hey Paul I think you and Russ should put a kit together for the engine relocation kit...

now thats just too funny :D

dabears

11-15-2012 10:04 PM

Re: IH 9670 COE

Quote:

Originally Posted by russisloud (Post 70384)

now thats just too funny :D

no its not chop chop i want one!! :D

Cant wait to see more progress pics TC! Great that you should be able to get back at the 6x6 too!!

sparkycuda

11-16-2012 10:11 AM

Re: IH 9670 COE

Another fine example of the ingenuity that our members show. Next, someone will figure how to include the motor inside the transmission! Stellar work and model.

Ken

Tamiya Cowboy

11-18-2012 02:47 PM

Re: IH 9670 COE

Quote:

Originally Posted by russisloud (Post 70384)

now thats just too funny :D

LOL right :D

Quote:

Originally Posted by dabears (Post 70395)

no its not chop chop i want one!! :D

Cant wait to see more progress pics TC! Great that you should be able to get back at the 6x6 too!!

Thanks Aaron..

Quote:

Originally Posted by sparkycuda (Post 70412)

Another fine example of the ingenuity that our members show. Next, someone will figure how to include the motor inside the transmission! Stellar work and model.

Ken

Thanks much Ken they should be very nice to use they will work great when you add the cat motor under the hood of a KH then you can put the tranny and motor in the cab and still have the sleeper for the mfu..

Very small up date but tranny is mounted and the drive shafts have been made and also new Rc4wd drives added.

http://i58.photobucket.com/albums/g2...wboy/014-6.jpg
http://i58.photobucket.com/albums/g2...wboy/015-7.jpg

Tamiya Cowboy

11-19-2012 03:55 PM

Re: IH 9670 COE

This is what I love about this board here. All the vendors are all about helping and making custom parts for guys it just makes this hobby great.. Russ and I have been talking about this grill since May of this year but it has been well worth the wait for sure.. I just got the prototype today and it needs a little tweeking but all in all it is great Russ did a outstanding job I cant wait to get my other 4 and now I have this prototype I am ready to finish off this truck and get it into paint as soon as I can.. But enough jabber here are the picks..

http://i58.photobucket.com/albums/g2...boy/001-46.jpg
http://i58.photobucket.com/albums/g2...boy/002-10.jpg
http://i58.photobucket.com/albums/g2...boy/003-33.jpg
http://i58.photobucket.com/albums/g2...boy/004-31.jpg

AWESOME WORK RUSS!

Kaf343

11-19-2012 04:38 PM

Re: IH 9670 COE "THE GRILL"

**** that looks good, Great job Russ and cant wait for more updates and pics Paul.

plow jockey

11-19-2012 04:47 PM

Re: IH 9670 COE "THE GRILL"

That grill is spot on!!! I got mine the other day.Russ done an awesome job on it.COE's are my favorite! Cant wait to see this bad boy with some paint it. Keep those updates coming.Great job Paul!!

All times are GMT -4. The time now is 04:20 PM.

Page 1 of 3

Show 40 post(s) from this thread on one page