Scania W.A. Prime Mover 1/14.5
Hello Mini Truckers ;)
Danke you for the Messages. I buy a normaly Wedico Kit in 2007 http://img220.imageshack.us/img220/1577/49508995.jpg After 3 Yaers construction, is this the result. http://img137.imageshack.us/img137/3850/img3927gm.jpg Frame is from Wedico and my self, with Osswald and Wedico Spring also tuned (original to high). The Power Train is with a 82 Watt Faulhaber Engine and a 3-Shift Gearbox from Veroma. http://img178.imageshack.us/img178/1858/1551ay0.jpg http://img89.imageshack.us/img89/6417/3689ik0.jpg The Fuel tank i make with 1mm Alu, inside is a 5 pack Battery from Orion with 5100mAh on each side. http://img98.imageshack.us/img98/9315/4178ks7.jpg http://img57.imageshack.us/img57/2372/20086186qu3.jpg Behind is the charing socket for the Battery http://img57.imageshack.us/img57/4093/41980860nn5.jpg http://img227.imageshack.us/img227/6889/66226608pf1.jpg Inside the Toolbox is the Electrical rearpanel from Wedico http://img227.imageshack.us/img227/308/54017919oa5.jpg The Fender are from Wedico and is modifed by me. The Holders i made of Brass http://img90.imageshack.us/img90/3003/3834aa6.jpg http://img90.imageshack.us/img90/6553/3824af9.jpg This is the 1. Part, next Part will follow soon Thank's Marcel |
Re: Scania W.A. Prime Mover 1/14.5
great work! It looks awesome
|
Re: Scania W.A. Prime Mover 1/14.5
Wonderful work! A real improvement from the original!
Kerst |
Re: Scania W.A. Prime Mover 1/14.5
Those are very nice upgrades! :)
|
Re: Scania W.A. Prime Mover 1/14.5
That is a sharp looking truck nice job.
Travis |
Re: Scania W.A. Prime Mover 1/14.5
WOW!! One of the nicest Scania's I've seen!
Brian |
Re: Scania W.A. Prime Mover 1/14.5
WOW!!!
Nice job man keep it up and coming. Greg |
Re: Scania W.A. Prime Mover 1/14.5
nice upgrade work!
certainly has the right look for down under! |
Re: Scania W.A. Prime Mover 1/14.5
Looking Good Marcel! I really like all the parts you milled! You have skill.:D
|
Re: Scania W.A. Prime Mover 1/14.5
That bar is very functional and well built. I like the lights and the magnetic plates. And yes the frying screen is good stuff, it even comes in stainless if you aren't painting. :)
|
Re: Scania W.A. Prime Mover 1/14.5
man talking about some nice upgrades wow! keep up the awesome work
|
Re: Scania W.A. Prime Mover 1/14.5
Great job so far keep it up.
Greg |
Re: Scania W.A. Prime Mover 1/14.5
Thank You :)
The Parts need lot of time. Measured, design and made. Some i must made twice ;) . After finish the Construction i painted the Frame in RAL 7021 is similar like original Scania Frame Color. First Primer http://img12.imageshack.us/img12/8379/46557366.jpg Second Color http://img12.imageshack.us/img12/5696/83111880.jpg http://img12.imageshack.us/img12/3534/83937790.jpg The Weels from Leimbach and Fifth Weehl is from Tokle. http://img219.imageshack.us/img219/5100/50811.jpg Scania Wheel Hub red=Leimbach Wheel Hub blue=New Scania Wheel Hub http://img136.imageshack.us/img136/8246/scanianabe3.jpg http://img136.imageshack.us/img136/7448/50661.jpg Next Part Follow soon, thanks Marcel |
Re: Scania W.A. Prime Mover 1/14.5
Holy crap that is awesome work. Very good looking truck. I can't wait to see more.
|
Re: Scania W.A. Prime Mover 1/14.5
This is a beautiful looking Scania! I really like your eye for detail and the custom parts you made for it. This is what a Wedico should be. Seeing your truck completed, and how great it turned out, I can say the three years of building is well worth the effort and wait. I've been building my own Wedico, on and off, for 4 years, so now I don't feel so bad about it taking a long time!
Looking forward to seeing more photos! |
Re: Scania W.A. Prime Mover 1/14.5
That is a great looking truck. Kind of makes me want to get a Scania.
|
Re: Scania W.A. Prime Mover 1/14.5
Thank You for the compliments
Quote:
|
Re: Scania W.A. Prime Mover 1/14.5
There is really big differance with the standart kit and your truck. It is really lovely scania !
|
Re: Scania W.A. Prime Mover 1/14.5
Thanks
In this Part i show you some modification about the Cab. First i made a Alu plate for reinforcement the Cab, of course also for the new Cab look. The Alu plate have the same high like the Original Cab. http://img71.imageshack.us/img71/8619/1000ss8.jpg http://img204.imageshack.us/img204/8410/11og6.jpg I modified also the Mudguard http://img217.imageshack.us/img217/4742/41118.jpg The Cab look i made in Brass and is functional. http://img403.imageshack.us/img403/9200/75533715yu8.jpg http://img403.imageshack.us/img403/6838/83361403jr2.jpg from the inside it looks like, he works like a sliding mechanism. http://img403.imageshack.us/img403/354/81399053oi7.jpg the new Cab entry http://img218.imageshack.us/img218/5406/3643cf2.jpg I need a another Cockpit for down Under because of the right hand drive. My Dealer in Swtzerland show me a RHD Wedico Cockpit (i was surprised, but Wedico made this for the british market). But the problem was the same it was too flat. After this i made one in ABS it looks better than the Original Wedico but it was lot of work. http://img16.imageshack.us/img16/6172/5867.jpg http://img16.imageshack.us/img16/9758/5873c.jpg http://img16.imageshack.us/img16/9572/5883.jpg I modified also the Mirrors, the Wedico's are not bad but a litttlebit square http://img27.imageshack.us/img27/5870/58961d.jpg http://img27.imageshack.us/img27/7558/59031.jpg The mirror effect are from a ABS-Mirror plate that i find by a Dealer. http://img27.imageshack.us/img27/6697/59261.jpg At the Next Part i show you som kinds of unforeseen ? |
Re: Scania W.A. Prime Mover 1/14.5
WOW!!!:eek: Your attention for detailing is outstanding! Your functional cab lock is the best I have seen. Your RHD dash almost looks real! Can't wait to see what is next.
Lynn |
Re: Scania W.A. Prime Mover 1/14.5
wow!!!!!
that is a cool truck great attention to the details |
Re: Scania W.A. Prime Mover 1/14.5
Thank you
Since I paint defects on the cab was, I decided to paint this again. Before I started I have some details still better built than Wedico. For example, the curve behind the door, which was previously too square. http://img39.imageshack.us/img39/6899/59981.jpg a rounded upper part of the sun visor. http://img39.imageshack.us/img39/903/20091v.jpg roof spoiler and side were rebuilt somewhat Original. With new Holders http://img39.imageshack.us/img39/8138/59861.jpg http://img39.imageshack.us/img39/4043/59891.jpg http://img39.imageshack.us/img39/4619/59961.jpg http://img822.imageshack.us/img822/3561/9341.jpg http://img39.imageshack.us/img39/6451/60041.jpg here the new color, similar to that of Zambonetti http://img140.imageshack.us/img140/1774/60193.jpg http://img140.imageshack.us/img140/1113/60161.jpg Here are some pictures when I had finished the model http://img519.imageshack.us/img519/2893/20131.jpg http://img18.imageshack.us/img18/5946/33311.jpg with B-Double Combination http://img697.imageshack.us/img697/3163/img3292lw.jpg http://img697.imageshack.us/img697/2038/img3303v.jpg |
Re: Scania W.A. Prime Mover 1/14.5
Wow that is an amazing truck you should be real proud of it and by far the best Scania I have seen and the blue really fits the it as well.:cool::cool:
Travis |
Re: Scania W.A. Prime Mover 1/14.5
nice truck with nice details :)
|
Re: Scania W.A. Prime Mover 1/14.5
Great subtle upgrades marcel! I like the redo. :)
|
Re: Scania W.A. Prime Mover 1/14.5
Hi, Thanks :rolleyes:
Quote:
|
Re: Scania W.A. Prime Mover 1/14.5
that is one awesome looking truck
|
Re: Scania W.A. Prime Mover 1/14.5
Quote:
|
Re: Scania W.A. Prime Mover 1/14.5
You have done some very nice work there inside and out. That Scania will do you proud. Ed
|
Re: Scania W.A. Prime Mover 1/14.5
Thank you
Quote:
I used the electrical system of Wedico, controller and sound module is from Servonaut. Total I have installed 84 LED. The lights in the sun visor I have built from Plexiglas with 1206 http://img193.imageshack.us/img193/2343/23451.jpg http://img98.imageshack.us/img98/1983/24461.jpg Parking light http://img708.imageshack.us/img708/5121/24881.jpg with Lowbeam http://img293.imageshack.us/img293/2969/24891.jpg with spotlight http://img32.imageshack.us/img32/381/24901.jpg and add spotlight, Total 200'000 MCD luminosity. Now i have a RC-Flashlight :) http://img20.imageshack.us/img20/6527/24911.jpg Side marker lamp http://img18.imageshack.us/img18/8790/33611j.jpg http://img18.imageshack.us/img18/5281/33141.jpg And something else behind the vehicle as Zambonetti's Scania. http://img839.imageshack.us/img839/8146/scania014.jpg http://img839.imageshack.us/img839/3996/36481.jpg I hope that you liked the lighting. |
Re: Scania W.A. Prime Mover 1/14.5
The only word that pops in my head is,WOW! Just beautiful!
FGD |
Re: Scania W.A. Prime Mover 1/14.5
A very detailed and scale- looking truck! Job well done on the lights.
|
Re: Scania W.A. Prime Mover 1/14.5
That truck is absolutely beautiful!!! Great job! I'd love to have it.
Ben |
Re: Scania W.A. Prime Mover 1/14.5
That looks really good. Where can i get a bullbar for my 540-MAN? Or who can make me one?
|
Re: Scania W.A. Prime Mover 1/14.5
Thanks
In the last few months I was able to build the trailer on. I know my combination is not quite the provisions of Western Australia. Are AB-triple road train it but my model is converted to long, but I like this combination. Moreover, the model in the B-Double operation Parcour fit. http://img683.imageshack.us/img683/3875/img5895l.jpg http://img196.imageshack.us/img196/6807/img5892c.jpg http://img15.imageshack.us/img15/4549/img5897qs.jpg The model is 2.85 meters long and empty weight about 15 kg |
Re: Scania W.A. Prime Mover 1/14.5
Nice work Marcel, it is a great looking Scania and road train
|
Re: Scania W.A. Prime Mover 1/14.5
WOW, great job man...
|
Re: Scania W.A. Prime Mover 1/14.5
Very nice scania, I myself have one getting ready to get started on and I might make a b-train out of two tankers. Excellent eye for detail.
Big John |
Re: Scania W.A. Prime Mover 1/14.5
thats a sweet build with the trailers. It has inspired Me to do more with my tamiya one and make it look more like the one I drive. Just with different colours and a road train build instead of a B double configuration.
|
All times are GMT -4. The time now is 01:44 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.