RC4WD/Eagle 360L Channel Mixing Oddity Occurring
Hello,
When I created a mix for these three channels I am only getting "pump off" movement with the bold control stick movements. I am at a loss why the others arent working... Boom is on ch 1 (pull = up / push = down) Bucket is on ch 2 (Left = curl / Right = uncurl) Stick is on ch 3 (pull = in / push = out) Mix 1 for Boom "ON" Master: ch 1 Slave: ch 5 (the pump) Offset 0 Positive 100 Negative 100 Mix 2 for Bucket "ON" Master: ch 2 Slave: ch 5 (the pump) Offset 0 Positive 100 Negative 100 Mix 3 for stick "ON" Master: ch 3 Slave: ch 5 (the pump) Offset 0 Positive 100 Negative 100 Any help would be greatly appreciated! |
Re: RC4WD/Eagle 360L Channel Mixing Oddity Occurring
Disregard, I answered my own question...
Before https://i.postimg.cc/t4DF7Wpr/7-3-2022-7-31-18-PM.jpg After https://i.postimg.cc/tgTW6Jg9/7-3-2022-7-30-35-PM.jpg |
All times are GMT -4. The time now is 03:50 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.