RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   General Discussion (https://www.rctruckandconstruction.com/forumdisplay.php?f=12)
-   -   Futaba FASST Radio (https://www.rctruckandconstruction.com/showthread.php?t=1534)

aseejr 02-24-2011 02:03 AM

Futaba FASST Radio
 
Just thought I'd share:

Was testing Futaba 2.4 FASST radio, specifically the 7C Heli (only because I have them already). You are able to operate multiple receivers (I am using R617FS) all at the same time on the same transmitter (after binding them of course).

I tested 2 receivers with a servo plugged into each receiver on the same channel. Move the transmitter stick of that channel both servos move.

My thought now is on a build, you can place 1 receiver on the truck and 1 receiver on the trailer, bound to the same transmitter. You can mix functions / channels between the two units. Say using 4 channels on the truck and the other 3 channels on the trailer, without running wires between the two units.

I that came out clear.

SmallHaul 02-24-2011 09:28 AM

Re: Futaba FASST Radio
 
Good idea Albert! That would be great to run the legs & lights wireless.


All times are GMT -4. The time now is 07:13 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.