Spektrum DX10 system fault
 

Hy Guys, I purchased said item at Dortmund this year for one of my new models:), The model that it is going into is ready for the transmitter testing.
After connecting all of the servos all was good, turn off the transmitter came back to it later turn it all on again and this came up.:(
http://i1235.photobucket.com/albums/...pse5ccb983.jpg
Has anyone had any experience with this issue?

Re: Spektrum DX10 system fault
 

did u buy it new or used because that may be the problem :):):):)

Re: Spektrum DX10 system fault
 

Yes it was new out of the box from TTM in Germany

Re: Spektrum DX10 system fault
 

Hi Paul,

Hold the black roller button down for 5 to 30 seconds and it will clear..

Re: Spektrum DX10 system fault
 

did paul sort it out mate

Re: Spektrum DX10 system fault
 

have u fixed the problem

Re: Spektrum DX10 system fault
 

Thanks Elliot, I did what you said and it now works fine. How did you know about the fix?
Paul

Re: Spektrum DX10 system fault
 

elliot is talented

Re: Spektrum DX10 system fault
 

Hi Paul, glad it worked. My radio did the same a few times, its a problem with Version 1 of the software. Sometimes it clears by itself but once I couldn't get rid of it, so I called horizon hobby and they told me about holding the roller button done until it clears.

Re: Spektrum DX10 system fault
 

I would suggest upgrading the firmware on the 10t if you haven't already.

Note: you should backup you models to the SD card before doing so. You may also need to re-bind the models.

Cheers,
AP

Re: Spektrum DX10 system fault
 

I have upgraded the firmware and it has solved the problem,
Now it takes about ten seconds for the transmitter to boot up.
Prior to the firmware upgrade it would boot up in about 1 second.
It's not a big problem but its not the same as it was out of the box any ideas?
Thanks Paul

Re: Spektrum DX10 system fault
 

Paul,

Mine takes a while to start up as well, not 10 seconds though.

I might try and ask Spektrum to comment on the boot time (it does feel long).

I will also check my DX8 and see if it is the same.

Cheers,
AP

Re: Spektrum DX10 system fault
 

Ok thanks a lot
Paul

Re: Spektrum DX10 system fault
 

Paul,

I did ask Spektrum about the boot time, apparently it is due to the additional complexity. The dx18 is similar to the 10t.

FWIW I have been playing with the spam files, from bog the 8 and the 10t, the 10t's ones have a lot more stuff.

Cheers,
AP

Re: Spektrum DX10 system fault
 

Thanks for the reply, its good to know its not a fault.
Paul

Re: Spektrum DX10 system fault
 

I have a comment from someone in the know in Spektrum whom reckons 8 mixes are available on the DX10T.

Today I tried some stuff with the mixes on the radio, and documented how i did it:
https://docs.google.com/file/d/0B6LW...it?usp=sharing

I do know that whilst I can't see the mixes once I move them they do still work. Just not sure how many active ones I can have.

Cheers,
AP

Re: Spektrum DX10 system fault
 

Can't open the link, can any one else open it?

Re: Spektrum DX10 system fault
 

Yes I can

Re: Spektrum DX10 system fault
 

All,

As an alternative you can try downloading it from here:
https://sites.google.com/site/txprof...edirects=0&d=1

Paul,

I have just sent you a PM as well.

Cheers,
Andrew P