Winch controls ?
I've got a questions about controlling a winch on my King.
Would a pico-switch be the answer to control in and out functions or would it only work one way? Any help on this would be awesome! |
Re: Winch controls ?
If you have a rc4wd winch, plug it into the receiver, if you have a extra channel available. Or if you have an MFU you can plug it into the MFU where the motorized legs would go, that how I have mine set up on my knight hauler. Hope that helps
|
Re: Winch controls ?
That does help a lot, don't know why I didn't think of that. Thanks Wolf
|
Re: Winch controls ?
i've used , 1/18 scale esc's and servo boards to control my 3racing winches. the the one that come with the 3racing winch is pretty good to. but it on off no fine control. servo or esc will give you more control
|
Re: Winch controls ?
Thank you that would be even better
|
Re: Winch controls ?
I was also going to say if you want a compact little ESC, so you can feather the winch speed, from remote, then a servo circuit board would work really well for that. In fact a servo, itself, would make a great winch. Convert it to continuous rotation and you'd be set. You'd only have to make a cable drum, or throw a chain drive sprocket on the output shaft of the servo, to wind or spool a separate drum. Compact, plenty of power, if you gear it right, or pick the right servo, and proportional control.
|
All times are GMT -4. The time now is 11:39 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.