1/16 John Deere 9620rx
This is my work in progress 1/16 John Deere 9620rx.
|
Re: 1/16 John Deere 9620rx
4 Attachment(s)
My current progress.
|
Re: 1/16 John Deere 9620rx
5 Attachment(s)
More Progress
|
Re: 1/16 John Deere 9620rx
|
Re: 1/16 John Deere 9620rx
Looks really good and seems to be a smooth operation. Nice job.
Chris |
Re: 1/16 John Deere 9620rx
Thank you
|
Re: 1/16 John Deere 9620rx
Nice conversion! Runs pretty good...
|
Re: 1/16 John Deere 9620rx
Looks nice, do you have a big disc or plow or planter to pull behind?
How was the conversion? Jim |
Re: 1/16 John Deere 9620rx
Thank you. I don't have any implements at the moment. I plan the get the 1/16 Lemken Air Drill Solitair 9, or the 1/16 John Deere Disc 637 Flex Fold, and install firgelli actuators on them to make them functional. The build took about a week and 1/2 to finish. I would say that the hardest parts were cutting out the idler wheels, and making the main drive wheel compatible to the axle shafts. It doesnt have a good turning rate. That's the down side, its turn wide. I now have to fit the main drive wheels with teeth to catch the tracks a little better to reduce slipping when pulling.
|
Re: 1/16 John Deere 9620rx
Hi,
What make is this model that's converted? Would love to have a go and converting one. Thank you :bounce: |
Re: 1/16 John Deere 9620rx
Its an Ertl 1:16 scale John Deere 9620rx
|
Re: 1/16 John Deere 9620rx
What kind of Axles drivelines and transmission did you use?
|
Re: 1/16 John Deere 9620rx
A nicely done conversion!
|
Re: 1/16 John Deere 9620rx
Quote:
That drive motion is very tight. No play. I like it. That will fair well for more precision. |
Re: 1/16 John Deere 9620rx
I used a Rc4wd R2 BLACK CRAWLER TRANSMISSION V2, two Tamiya King hauler axles, Rc4wd punisher drive shafts.
|
Re: 1/16 John Deere 9620rx
Did you do a Case 620 conversion?
|
All times are GMT -4. The time now is 07:28 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.